导弹电液伺服机构的变论域自适应模糊滑模控制

为减弱导弹电液伺服机构位置跟踪滑模控制(SMC)的抖振,提出了一种基于变论域自适应模糊滑模控制(AFSMC)方法。通过在线调节输入变量论域和规则后件隶属度函数,可在不影响滑模变结构控制鲁棒性的情况下有效削弱滑模切换控制产生的抖振。给出了相应的控制律。设计的控制系统具有良好的跟踪性能,提高了电液伺服机构的跟踪控制精度。仿真实验结果验证了该控制方案的有效性。     

基于快速终端滑模的模糊逼近系统及其应用

为改善模糊系统逼近的收敛速率,提出了一种基于快速终端滑模的反向传播(BP)学习算法。将快速终端滑模引入模糊逻系统的学习算法,综合终端吸引子有限时间收敛和线性系统指数收敛的性质,提高了对非线性连续函数的逼近能力。仿真结果表明:该算法能以较快速率逼近未知函数,且逼近过程稳定,较普通学习算法更为精确和有效。     

基于全解耦奇偶方程的动态系统执行器故障检测与识别

给出了基于全解耦奇偶方程的动态系统执行器故障的检测与识别方法。讨论了全解耦奇偶向量的产生方法,给出了全解耦奇偶向量的存在条件,并结合卡尔曼滤波方法得到了故障模型参数的估计方法。最后给出了仿真实例。结果表明,全解耦奇偶方程方法能估计出动态系统执行器故障模型。     

激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

76°/40°双三角翼前缘涡破裂及其控制实验研究

流动显示结果表明,喷流能有效地推迟双三角翼前缘涡的破裂,且随着攻角的增大,前缘涡破裂位置逐渐推后,喷流极大地改善了大攻角情况下前缘涡的非对称破裂特性,能有效地克服可能出现的机翼的"摇滚"现象.另外,后缘喷流可以减弱乃至消除前缘涡混掺现象的发生,进而有利于飞行器的操纵.     

KuaFu Mission

The KuaFu mission-Space Storms, Aurora and Space Weather Explorer-is an "L1+Polar" triple satellite project composed of three spacecraft: KuaFu-A will be located at L1 and have instruments to observe solar EUV and FUV emissions, and white-light Coronal Mass Ejections (CMEs), and to measure radio waves, the local plasma and magnetic field,and high-energy particles. KuaFuB1 and KuaFu- B2 will bein polar orbits chosen to facilitate continuous 24 hours a day observation of the north polar Aurora Oval. The KuaFu mission is designed to observe the complete chain of disturbances from the solar atmosphere to geospace, including solar flares, CMEs, interplanetary clouds, shock waves, and their geo-effects, such as magnetospheric sub-storms and magnetic storms, and auroral activities. The mission may start at the next solar maximum (launch in about 2012), and with an initial mission lifetime of two to three years. KuaFu data will be used for the scientific study of space weather phenomena, and will be used for space weather monitoring and forecast purposes. The overall mission design, instrument complement, and incorporation of recent technologies will target new fundamental science, advance our understanding of the physical processes underlying space weather, and raise the standard of end-to-end monitoring of the Sun-Earth system.     

高速电路PCB板中电磁干扰的研究

结合设计印制电路板的实际经验 ,首先介绍了电磁兼容和电磁干扰 ,其次分析了高速电路PCB设计中产生电磁干扰的主要原因 ,最后提出了防止和抑制电磁干扰的方法以及提高电磁兼容性的具体措施。     

强场脉冲充磁退磁装置

介绍了充电电容器通过磁路瞬时放电产生强磁场的原理 ,选择回路参数可实现高矫顽力类永磁材料的充磁或者退磁 ,介绍了所研制的脉冲充磁退磁装置的性能。