Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

基于MEMS的微槽冷却系统在微纳卫星热控中的应用

介绍了基于微机电一体化系统(MEMS)的微槽冷却系统的研究成果。分析了将微槽冷却系统用于微纳卫星热控设计时的特殊要求。讨论了表征微槽冷却系统性能的水力学系统和传热性能。理论分析和数值模拟结果表明,微槽冷却系统可使大热流密度的热源芯片温度维持在较低的范围内,能满足微纳卫星热控的要求。研究认为,压降和热阻均较小的深槽可在小泵功率时提供较优的传热性能。     

智能天线结构模糊自适应变形控制实验研究

基于dSPACE半物理仿真系统和所研制的压电作动器,设计并构建了智能天线结构实验平台,进行了结构变形控制实验研究。实验中采用常规PID作为基本控制方法,并在此基础上设计了一种模糊自适应PID控制器,将两种方法对应的不同控制效果进行了对比。结果表明:在所给的实验条件下,基于压电材料可实现对智能天线结构变形的控制,作动器控制变形量最大可达166μm;两种控制方法均可对结构变形进行控制,模糊自适应方法的绝对位置控制精度达到±0.5μm;应用模糊自适应PID控制方法对结构进行变形控制,较之常规PID控制方法能够降低系统响应的超调量,缩短稳定时间,提高控制精度,得到更好的控制过程。     

三维非结构网格DSMC并行算法及应用研究

基于PC-CLUSTER机群并行体系结构与消息传递库MPI并行环境,研究了三维非结构网格DSMC并行算法。提出一类基于结构背景网格上的非结构网格动态分区策略,保证各子区域的分子数量大致相等,实现计算进程间的动态负载平衡。利用MPI库函数构造了两类符合DSMC并行原理的通讯法:单步通讯法与多步通讯法。采用单控制多数据流(SPMD)以及Master/Slave并行模式,设计了三维非结构网格DSMC整体并行算法。给出了跟踪模拟分子在四面体网格间迁移运动的详细计算过程。最后对全尺寸航天飞机高超声速绕流进行了并行模拟,验证并行算法的有效性。     

多层RAM涂层对任意入射角电磁波的反射特性分析

为了解决结构型吸波材料的分析和设计中所遇到的反射系数计算问题，从电磁场理论出发，导出了电磁波以任意角入射时多层雷达吸波材料（RAM）涂层的反射系数公式，此法简单易行，为结构型吸波材料的计算机辅助分析和设计提供了基础，同时给出了计算曲线的例子，通过实例计算分析了电磁波的入射角，极化状态等对反射特性和隐身效果的影响。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

低温推进剂液体火箭发动机超导电磁泵压循环系统初步设想

为解决大型液体火箭发动机现有循环系统性能和技术难度及成本之间的矛盾，本研究基于低温推进剂液体火箭发动机工作环境特点，并结合磁流体发电机和直流超导电机的原理和工作特性，提出了一种不同于涡轮泵循环的超导电磁泵压循环系统。文中阐述了系统中超导电磁泵和磁流体发电装置的基本结构与工作原理，分析了系统的优缺点，并对超导电磁泵压循环系统进行了初步的可行性论证，最后对超导电磁泵压循环系统的应用前景进行了分析和论述。结论认为．作为一种全新的火箭发动机循环系统，超导电磁泵压循环系统具有非常广阔的发展及应用前景。     

具有容错性的自重构机器人变形原理

自重构机器人通过自主变形来适应环境和任务的需要，它具有低成本、多样性、自修理和容错性等特点。本文针对系统的容错性目标，深入研究了具有容错性的自重构机器人的自组织变形方法。首先建立能够表达失效模块信息的系统结构描述模型；然后建立自重构机器人的模块运动规则；提出可以实现容错性的自组织变形算法。在系统出现失效模块的情况下，机器人依然能够有效完成指定的任务。本文以平面正方形晶格机器人翻越障碍物为例对变形原理和算法进行了验证和仿真。