中、小城市城中村现象形成原因分析

本文旨在对我国城市化进程中出现的"城中村"现象形成的原因进行分析,并分析由此带来的危害,促进我国城镇发展战略的健康发展.     

舰艇摇荡对舰载导弹飞行参数影响的分析

提出了分析导弹飞行参数受舰艇摇荡影响问题的思路,给出了导弹飞行参数在舰艇摇荡条件下的变化模型,反映了影响作用的本质,并给出了实际的仿真结果及分析结论。     

空间站充气式下载系统的概念研究

空间站充气式下载系统 (IDS)是在俄罗斯充气式再入与降落技术 (IRDT)基础上发展起来的一种新概念航天回收技术。详细介绍了IDS基本概念和工作原理 ,通过与传统降落伞回收方式的比较 ,总结了该技术的特点。讨论了该技术对结构、轨道、气动力、气动热、热防护层等关键子系统的设计需求。归纳了国外研究现状及发展趋势 ,分析了航天和军事领域的应用前景。     

应用基于FEM的预成形最优化方法提高锻件变形均匀性

锻件变形分布不均匀将导致锻件各部位的组织和性能产生很大差异。应用基于正向有限元数值模拟和最优化方法进行坯料预成形设计的新方法,可显著提高锻件各部位的变形均匀性。首先介绍了以提高锻件变形分布均匀性为目的的坯料预成形最优化方法的基本原理,并针对典型的IN718合金涡轮盘锻件进行了坯料预成形设计。给出了预成形坯料与普通圆柱坯料的对比结果,并进行了相应的试验验证。结果表明,应用这种方法对IN718合金涡轮盘锻件进行坯料预成形设计,可使盘锻件各部位变形均匀性明显改善。     

45% SiCp/Al复合材料的微动磨损试验设计与验证

针对运载发射阶段卫星锁轴机构45%SiCp/Al复合材料与TC4材料之间可能存在的微动摩擦磨损与切向接触刚度问题，本文在调研和仿真分析的基础上，设计等效的扫频微动摩擦磨损试验系统。通过夹持力的标定保证最大影响因素接触应力的一致，采用扫频振动模拟摩擦副受载工况，并对45%SiCp/Al复合材料试件表面形貌进行振前振后检测。试验结果表明，45%SiCp/Al复合材料在较高的形状精度和表面粗糙度条件下，能够承受较大载荷的微动摩擦，摩擦副结合面具有良好的切向接触刚度。     

Performance analysis of variable speed tail rotors with Gurney flaps

Gurney Flaps (GFs) are used for improving the performance of variable speed tail rotors. A validated analytical helicopter model able to predict the main and tail rotor power is utilized. The fixed height GF has substantially small influence on the tail rotor power in hover and low to medium speed forward flight, and can obtain significant power reduction in high speed flight. This ability can be enhanced by decreasing the tail rotor speed. With the deployment of GF, the collective pitch of the tail rotor decreases, and the maximum tail rotor thrust increases. The GF can compensate the reduction of the maximum thrust by the decrease in the tail rotor speed. The GF with a height of 5% of the chord length can almost remedy 50% of the thrust reduction introduced by decreasing 10% of the tail rotor speed. With the increase of GF height, the maximum thrust generated by the tail rotor increases. The GF with larger height can cause the increase in the tail rotor power in hover and low to medium speed flight. The retractable GF can obtain more power savings than the fixed height GF. However, the benefit is substantially small even in high speed flight. Considering the side effects introduced by the active GF, the fixed height GF may be more preferable. The mechanism for the retractable GF to generate more tail rotor thrust is to increase the lift in advancing side due to the higher dynamic pressure.     

弹道跟踪数据融合处理的快速算法

针对弹道跟踪数据融合处理中的大计算量环节研究了快速算法。用样条函数表示弹道参数,建立了多测元的联合观测模型和弹道参数的非线性融合计算模型,给出了弹道参数的求解算法,分析了弹道参数融合计算中的大型矩阵运算问题,利用基础线性代数函数库提高了大型矩阵的运算速度。建立了样条模型计算的非线性约束优化模型,给出了确定样条节点位置的优化算法,通过分析样条模型的计算原理设计了并行算法,实现了样条模型的并行化计算。仿真结果表明,弹道参数融合计算和样条模型计算的效率都得到了显著提高,计算时间减少了65.47%,对缩短数据处理周期有重要意义。     

飞机驾驶舱视觉告警信号设计的基本要求分析

飞机驾驶舱告警系统对提高飞行员工作效率和保障飞行安全具有重要的作用。本文主要概述了视觉告警信号的设计标准和信息编码的设计规定,并论述了相关标准中对颜色编码和告警字符的设计规定,为飞机驾驶舱视觉告警信号的设计提供相关设计参考。     

Parallel algorithm and its convergence of spatial domain decomposition of discrete ordinates method for solving radiation heat transfer problem

To improve the computational efficiency and hold calculation accuracy at the same time,we study the parallel computation for radiation heat transfer. In this paper, the discrete ordinates method(DOM) and the spatial domain decomposition parallelization(DDP) are combined by message passing interface(MPI) language. The DDP–DOM computation of the radiation heat transfer within the rectangular furnace is described. When the result of DDP–DOM along one-dimensional direction is compared with that along multi-dimensional directions, it is found that the result of the latter one has higher precision without considering the medium scattering. Meanwhile, an in-depth study of the convergence of DDP–DOM for radiation heat transfer is made. Analyzing the cause of the weak convergence, we relate the total number of iteration steps when the convergence is obtained to the number of sub-domains. When we decompose the spatial domain along one-,two- and three-dimensional directions, different linear relationships between the number of total iteration steps and the number of sub-domains will be possessed separately, then several equations are developed to show the relationships. Using the equations, some phenomena in DDP–DOM can be made clear easily. At the same time, the correctness of the equations is verified.