Survey of maneuvering target tracking. Part I. Dynamic models

This is the first part of a comprehensive and up-to-date survey of the techniques for tracking maneuvering targets without addressing the so-called measurement-origin uncertainty. It surveys various mathematical models of target motion/dynamics proposed for maneuvering target tracking, including 2D and 3D maneuver models as well as coordinate-uncoupled generic models for target motion. This survey emphasizes the underlying ideas and assumptions of the models. Interrelationships among models and insight to the pros and cons of models are provided. Some material presented here has not appeared elsewhere.     

紫外后向散射探测臭氧总量的反演误差研究

通过探测紫外后向散射获取臭氧总量目前已经成为臭氧总量探测的主要方法之一. 本文以模拟计算为主要方法, 从模式计算误差, 反演算法误差和仪器误差三方面着手, 对影响臭氧总量反演精度的各个参数进行分析研究, 并对由其引起的臭氧总量反演误差进行定量计算, 研究结果对臭氧总量反演精度的提高和实际观测资料的处理有着重要的指导意义.     

车载卫星天线用交流伺服系统设计

为实现在运动车辆上收看卫星电视，设计了车载卫星天线用交流伺服系统。给出了方案的基本原理，并采用矢量控制对交流电机进行变频调速，以及位置、速度和电流反馈的三闭环调节器。确定了电流环、速度环和位置环的参数。仿真结果表明，所设计的交流伺服系统有良好的动态和抗干扰性能。     

S/WAVES: The Radio and Plasma Wave Investigation on the STEREO Mission

This paper introduces and describes the radio and plasma wave investigation on the STEREO Mission: STEREO/WAVES or S/WAVES. The S/WAVES instrument includes a suite of state-of-the-art experiments that provide comprehensive measurements of the three components of the fluctuating electric field from a fraction of a hertz up to 16 MHz, plus a single frequency channel near 30 MHz. The instrument has a direction finding or goniopolarimetry capability to perform 3D localization and tracking of radio emissions associated with streams of energetic electrons and shock waves associated with Coronal Mass Ejections (CMEs). The scientific objectives include: (i) remote observation and measurement of radio waves excited by energetic particles throughout the 3D heliosphere that are associated with the CMEs and with solar flare phenomena, and (ii) in-situ measurement of the properties of CMEs and interplanetary shocks, such as their electron density and temperature and the associated plasma waves near 1 Astronomical Unit (AU). Two companion papers provide details on specific aspects of the S/WAVES instrument, namely the electric antenna system (Bale et al., Space Sci. Rev., 2007) and the direction finding technique (Cecconi et al., Space Sci. Rev., 2007).     

斜齿轮传动的动态特性分析

 推导了求解齿轮传动系统动态响应的Fourier级数方法,在处理复杂传动系统时大大简化了计算,又保留了系统的参变和整体特性。通过斜齿轮传动动态实验,获得了齿轮副的相对振动速度和传动误差,从而证明了Fourier方法的准确性和可靠性。     

基于先验目标航向的主/被动联合多基地航空搜潜建模与仿真

利用主动吊放声纳与被动浮标组成多基地航空声纳对目标进行搜索,可节约搜索时间,有效提高搜潜效率。针对已知目标的大概航向,在有限范围内确定目标存在区的情况下,建立了多基地搜潜范围模型、单机吊放声纳和浮标的主/被动联合多基地搜潜模型、潜艇运动模型,仿真分析了潜艇初始航向、海洋环境噪声、搜索样式等因素对联合搜索概率的影响。结果表明,潜艇初始航向角度对单机吊放声纳和浮标的联合搜索概率影响较小,海洋环境噪声的变化对单机吊放声纳和浮标的联合搜索概率影响较大。     

Some practical strategies for reducing intermodulation in satellitecommunications

Various heuristic procedures for obtaining practical solutions to the general one-level carrier frequency assignment problem are described. The problem treated is general in the sense that it accommodates the case where L of the N slots may be explicitly designated as prohibited and unavailable for assignment. This problem occurs in satellite transmission with many small carriers accessing the same transponder where, due to multipath and TV interference from crosspolarized transponders of the same satellite and from copolarized transponders of the adjacent satellites, some portions of the bandwidth of the considered transponder cannot be used. To permit comparison with respect to the intermodulation advantage and central-processing-unit time required, the case without prohibited slots is considered. The sequential insertion procedure in which, starting with two carriers at the two end slots, one additional carrier at a time is optimally inserted into one of the unassigned slots is found best when the ratio between the available bandwidth and the total carrier bandwidth is greater than about 125%. All the heuristic procedures produced assignments whose intermodulation advantages are all greater than the bandwidth ratio     

A new stationary droplet evaporation model and its validation

The liquid droplet evaporation character is important for not only combustion chamber design process but also high-accuracy spray combustion simulation.In this paper,the suspended droplets' evaporation character was measured in a quiescent high-temperature environment by micro high-speed camera system.The gasoline and kerosene experimental results are consistent with the reference data.Methanol,common kerosene and aviation kerosene droplet evaporation characteristics,as well as their evaporation rate changing with temperature,were obtained.The evaporation rate experimental data were compared with the prediction result of Ranz-Marshall boiling temperature model (RMB),Ranz-Marshall low-temperature model (RML),drift flux model (DFM),mass analogy model (MAM),and stagnant film model (SFM).The disparity between the experimental data and the model prediction results was mainly caused by the neglect of the nat ural convection effect,which was never introduced into the droplet evaporation concept.A new droplet evaporation model with consideration of natural convection buoyancy force effect was proposed in this paper.Under the experimental conditions in this paper,the calculation results of the new droplet evaporation model were agreed with the experimental data for kerosene,methanol and other fuels,with less than 20％ relative deviations.The relative deviations between the new evaporation model predictions for kerosene and the experimental data from the references were within 10％.     

某四级风扇特性计算的三维数值模拟

利用自主开发的程序对某四级风扇进行了特性计算,一方面是为了发动机整机的匹配,另一方面是为了校核程序对多级压气机的数值模拟精度.程序采用标准k-ε湍流模型计算湍流黏性系数,为了避免计算过程中由湍流模型方程带来的数值刚性问题,对湍流模型方程中的源项作了隐式处理.转静子之间的数据传递采用了掺混界面法.通过对一个单级风扇进行计算,并与常用的几种商用软件计算结果以及实验结果进行对比,初步验证了程序计算结果的可靠性.进一步对某四级风扇进行了计算分析,发现程序计算精度较好,可用于工程设计中.      

数字化测量系统在大部段对接装配中的应用

分析了数字化测量系统的作用和构成,并针对飞机大部件对接,阐述其辅助装配流程,测量数据处理以及测量环境的布置等问题。本研究为数字化测量技术在飞机装配中的工程化应用提供了技术基础。