300 MVA脉冲发电机组滑差方式起动过程研究

介绍了300 MVA脉冲发电机组的滑差装置。对机组采取滑差方式的起动过程进行了分析和等效建模。根据机组实际起动过程电气波形,利用非线性规划模型,建立了滑差装置液体电阻等效仿真模型,并代入机组参数对起动过程进行仿真,仿真结果和实际波形吻合,验证了模型的正确性。在此基础上,为了使机组的转速达到额定转速,提出在滑差装置液体电阻低位时并入两级固体金属电阻后短接的方案,给出了两级固体金属电阻的阻值等理论参数,并通过仿真验证了方案的可行性。建立的仿真模型可以作为研究不同参数、不同控制策略下的机组起动过程动态特性的重要工具。     

Dynamics and de-spin control of massive target by single tethered space tug

This paper investigates the dynamics and de-spin control of a massive target by a single tethered space tug in the post-capture phase. The dynamic model of the tethered system is derived and simplified to a dimensionless form. Further, a decoupled PD controller is proposed, and the local stability of the controller is analyzed by linearization technique. Parametric studies of the dynamics and de-spin control of a massive target are conducted to characterize the dynamic process of de-spin with the proposed control law. It is shown that the massive target can be de-span by a single and small space tug with limited thrust within finite time. The thrust tangent with the tether de-spins the target while the thrust normal to the tether prevents the tether from winding up the target. The tether length has a positive contribution to the de-spin of a target. The longer tether leads to a faster de-spin process.     

An evolutionary computational framework for capacity-safety trade-off in an air transportation network

Airspace safety and airport capacity are two key challenges to sustain the growth in Air Transportation. In this paper, we model the Air Transportation Network as two sub-networks of airspace and airports, such that the safety and capacity of the overall Air Transportation network emerge from the interaction between the two. We propose a safety-capacity trade-off approach,using a computational framework, where the two networks can inter-act and the trade-off between capacity and safety in an Air Transport Network can be established. The framework comprise of an evolutionary computation based air traffic scenario generation using a flow capacity estimation module(for capacity), Collision risk estimation module(for safety) and an air traffic simulation module(for evaluation). The proposed methodology to evolve air traffic scenarios such that it minimizes collision risk for given capacity estimation was tested on two different air transport network topologies(random and small-world) with the same number of airports. Experimental results indicate that though airspace collision risk increases almost linearly with the increasing flow(flow intensity) in the corresponding airport network, the critical flow depend on the underlying network configuration. It was also found that, in general, the capacity upper bound depends not only on the connectivity among airports and their individual performances but also the configuration of waypoints and mid-air interactions among conflicts. Results also show that airport network can accommodate more traffic in terms of capacity but the corresponding airspace network cannot accommodate the resulting traffic flow due to the bounds on collision risk.     

考虑外圈局部缺陷的滚动轴承非线性动力特性

 建立了考虑滚动轴承外圈局部缺陷、非线性轴承力和径向游隙等非线性因素的滚动轴承系统动力学微分方程,并用Runge-Kutta-Felhberg算法对其求解。利用分岔图、Poincaré映射图、频谱图以及均方值、峰值因子、峭度等时域参数,分析了滚动轴承的响应、分岔和混沌等非线性动力特性。结果表明：考虑外圈局部缺陷的滚动轴承系统存在多种周期、拟周期和混沌响应;滚动轴承系统进入混沌的主要途径是倍周期分叉;峰值因子比率在中、低速,峭度比率在低速时可以很好地识别外圈局部缺陷。均方值比率除了在与轴承动力特性有关的个别转速外,可以在较大的转速范围识别外圈局部缺陷。     

基于局部三角变换的OFDM系统

正交频分复用(OFDM)调制技术由于具有良好的抗多径干扰能力和高效的频谱利用率,在许多数字传输系统中被广泛应用,成为当今卫星通信研究的热点。本文提出了基于局部三角变换（LTT）的OFDM系统模型,该系统带外频率谱密度下降快,并能保持相邻的OFDM符号的正交性。给出了用离散余弦变换（DCT）实现的快速算法及复杂度,并考查了最优基的选取。仿真和分析结果表明：该系统误码率比基于快速傅里叶变换（FFT）的系统更小,能更好地适应高速传输带来的大多普勒频移,更有效地利用带宽,为接收端对高速数据的解调提供很好的保证。     

一种基于正弦图的工业CT系统转台旋转中心自动确定方法

构建一个工业CT成像系统,转台旋转中心的确定是非常关键的步骤,其定位误差会引起CT图像上的伪影。本文在详细分析了现存旋转中心确定方法不足的基础上,提出了一种新方法,该方法利用隐含在正弦图中的对称投影信息,并根据经过旋转中心的射线束在两个对称投影视角下透过的物体路径相同这一规律来定位旋转中心。相对现有算法,该方法适用于射线源与旋转中心的连线不严格垂直于探测器的情形,无需使用模体,亦无需知晓任何几何参数,实时且基本不受随机噪声影响。实验数据验证了该方法的有效性。     

颗粒阻尼对直升机旋翼桨叶减振效果的试验

 为探索直升机减振技术的新方法,研究颗粒阻尼技术在直升机旋翼桨叶减振中的应用,设计了直升机旋翼桨叶模型及其相应的颗粒阻尼器形式,利用试验方法研究了颗粒阻尼对非旋转及旋转桨叶模型的阻尼减振效果。试验结果表明：颗粒阻尼可以有效提高非旋转桨叶模型的前3阶阻尼水平,尤其可使桨叶第3阶模态阻尼比提高一个数量级甚至更多;在较低的转速范围内,颗粒阻尼还可以克服离心力作用,使旋转桨叶模型的挥舞和摆振加速度响应水平均得到有效削减,充分表明了颗粒阻尼作为一种振动控制手段应用于直升机旋翼桨叶的可行性。     

SiO_2-C复合气凝胶的制备及其结构

以间苯二酚(R)和甲醛(F)为碳源,以3-胺丙基三乙氧基硅烷(APTES)为硅源,一步溶胶一凝胶法简单快捷地合成了SiO_2-RF复合气凝胶,高温碳化后得到SiO_2-C复合气凝胶,并用扫描电镜、比表面分析仪对所得样品的结构进行了研究,并讨论了不同投料比对气凝胶结构的影响.结果表明碳化前,投料比APTES/R=1时,所得气凝胶具有最大的比表面积(S_(BET)=606.1 m~2/g),碳化后,由于体积收缩和酚醛热解产生新孔隙双重因素的影响,投料比AFTES/R=1/2时样品的比表面积达到最大(S_(BET)=704.2 m~2/g).     

RLV燃料贮箱低温泡沫隔热材料导热分析

针对RLV燃料贮箱使用的泡沫塑料,建立了闭孔匀质泡沫材料的传热模型,给出了利用泡沫材料结构参数计算热导率的方法.算例计算结果与实测值吻合较好,证明了模型的可信性和方法的可行性.最后利用对该模型的分析讨论了泡沫不均匀性的影响.     

无人机在恶劣气象条件下的自主决策技术

无人机(UAV)在实际战场环境中受恶劣气象条件等许多不确定因素的影响,因此必须不断提高其自主决策能力。主要研究无人机自主探测恶劣气象并进行自主决策的问题,首先介绍了影响无人机飞行的典型恶劣气象条件,然后提出了利用机载传感器获取气象信息并建立恶劣气象数学模型的方案,并提出了采用专家系统理论解决无人机遭遇恶劣气象时的自主决策问题。最后,对无人机在风切变、雷暴和紊流3种常见恶劣气象下的自主决策过程进行仿真。经分析,决策结果合理,仿真结果验证了该方法的可行性和有效性。