逆向涡流发生器减小涡轮叶尖泄漏流的数值研究

逆向涡流发生器可以有效减小涡轮叶尖泄漏流,提高叶片周向载荷.对影响逆向涡流器减小泄漏流的几个关键因素进行了数值研究,结果表明:入流和出流孔径比增大,涡流器流量增加,对叶尖泄漏流的减小效果越好,孔径比2∶1时比孔径比1∶1时涡流器流量增加了24%,叶尖泄漏流量降低了0.8%,叶片周向载荷提高了1%;与叶片前缘布置涡流器相比,在叶片中后部布置时涡流器流量增大,叶片周向载荷提高;涡流器布置越密,涡流器总流量增加,布置33个涡流器比布置9个涡流器叶尖泄漏流量降低了1.6%,叶片周向载荷提高了2.7%;出流角越小,叶尖泄漏流量越小,叶片周向载荷越大,出流角30°时泄漏流量比60°时降低了1.2%,叶片周向载荷提高了约2%.     

A New Method for Analyzing Integrated Stealth Ability of Penetration Aircraft

Taking into account the limitations of existing stealth performance analysis methods, a method termed as the integrated stealth performance analysis method is proposed for evaluating the stealth ability of the penetration aircraft. Based on various target radar cross section (RCS) scattering characters, this article integrates the relevant parameters needed for building up target circumferential RCS scattering model and proposes the RCS scattering controlling parameters to control the changing trends of the relevant model RCS scattering characters. According to the radar dynamic detecting characters during the whole penetration course, a dynamic stealth performance evaluating model is proposed accompanied by a series of stealth ability estimation rules. This new analysis method can enhance the integrality and dependability of the stealth analysis conclusions and summarize the relationship between the target RCS scattering characters and their effects on stealth performance. The rules indicated by this relationship can be used as the reference for designing new type of stealth aircraft and setting up specific penetration tactics.     

Low C/N_0 Carrier Tracking Loop Based on Optimal Estimation Algorithm in GPS Software Receivers

Suppressing jitter noises in a phase locked loop(PLL) is of great importance in order to keep precise and continuous track of global positioning system(GPS) signals characterized by low carrier-to-noise ratio(C/N0).This article proposes and analyzes an improved Kalman-filter-based PLL to process weak carrier signals in GPS software receivers.After reviewing the optimal-bandwidth-based traditional second-order PLL,a Kalman-filter-based estimation algorithm is implemented for the new PLL by decorrelating the model error noises and the measurement noises.Finally,the efficiency of this new Kalman-filter-based PLL is verified by experimental data.Compared to the traditional second-order PLL,this new PLL is in position to make correct estimation of the carrier phase differences and Doppler shifts with less overshoots and noise disturbances and keeps an effective check on the disturbances out of jitter noises in PLL.The results show that during processing normal signals,this improved PLL reduces the standard deviation from 0.010 69 cycle to 0.007 63 cycle,and for weak signal processing,the phase jitter range and the Doppler shifts can be controlled within ±17° and ±5Hz as against ±25° and ±15 Hz by the traditional PLL.     

复合热条件下椭球形封闭腔内低压气体的自然对流

以填充氦气的平流层浮空器为应用背景,对非均匀复杂热边界条件下大尺寸椭球形封闭腔内低压气体的自然对流热特性与动力学特性进行了数值模拟。以Fluent软件为基础,采用用户自定义函数(UDF)自编程技术引入外部非均匀的对流-辐射耦合热边界条件,考虑了低压气体密度对压力、温度的依赖关系。分析了不同条件下腔壁与内部气体温度、对流换热特性以及流场、压力、质心变化等动力学特性,通过数据分析,获得了腔内自然对流的局部对流换热系数关联式。研究结果表明,在平流层环境下,外部非均匀热边界条件及其变化对封闭腔内低压气体的自然对流热特性与动力学特性影响很大。     

叶片前缘圆柱形孔和扩张形孔气膜冷却特性研究

采用考虑曲率影响的瞬态液晶测量技术测量了叶片前缘扩张形孔和圆柱形孔的气膜冷却特性,分析了不同孔形在不同平均吹风比下气膜冷却效率的局部分布特征及定量变化关系,结果表明:①与圆柱形孔相比,扩张形孔射流的覆盖面更大,主要覆盖区域的偏移角度更小;②圆柱形孔的平均冷却效率在不同测量区域内均随平均吹风比的增加先升高后下降,扩张形孔的平均冷却效率在孔排间区域随平均吹风比的增加单调升高,在第二排孔后区域各平均吹风比下基本一致;③在实验范围内,扩张形孔的展向平均冷却效率较高.      

未来十年我国航天高端光电器件发展的战略思考

通过分析我国高端光电器件的发展现状及其与航天系统级产品之问的互动关系,深刻揭示出阻碍国产航天高端光电器件在系统级产品中工程化应用的"瓶颈"问题与关键环节,从战略上提出解决这些问题的意见与建议.     

一种用于接收微波的基带数字AGC设计

文章首先提出了一种基于微波信号下变频的基带数字AGC实现方案,然后给出了AGC检波电路、滤波电路、比较器电路设计。     

LEO卫星通信系统模糊逻辑动态位置区方案

文章在基于自主定位的动态位置区方案的基础上提出了模糊逻辑动态位置区方案,通过对用户在给定时间内运动模式的判定来动态改变用户的更新半径,并仿真比较了用户在不同初始更新半径下两种方案的更新和寻呼开销,以及用户在不同模糊逻辑统计时间下的更新和寻呼开销。仿真结果表明用户在该方案下的位置管理总开销相对于普通动态位置区有了明显的降低,提高了位置管理效率。     

复合材料层合板机械连接修理拉伸性能

带损伤孔的复合材料层合板拉伸强度会降低约55%,需要对其进行修理以恢复力学性能、满足使用要求。针对带圆形损伤孔的复合材料层合板设计了机械连接修理方案,通过轴向拉伸试验评估其修理效果。根据试验条件建立了有限元模型,分析不同的修理方案对破坏模式、破坏载荷、应力分布、钉载分配等产生的影响。试验及有限元分析(FEA)均表明,修理后的复合材料层合板,其强度恢复率达到55%~60%左右,应力集中部位主要在修理区域最外侧的钉孔旁,最终破坏模式为母板沿修理区域最外侧一排钉孔断裂。使用双面修理、增加螺栓排数、采用金属补片、适当增加补片厚度,可减缓应力集中,改善钉载分配,提高结构强度恢复率。      

Investigation of longitudinal aerodynamic parameters identification method for fly-by-wire passenger airliners

The flight control system of a fly-by-wire （FBW） passenger airliner with a complex frame-work and high feedback gain augmentation would change the original characteristic of a loaded signal and suppress the excitation of an airplane＇s pertinent motion modes. Taking a research example of an FBW passenger airliner model with longitudinal relaxed-static-stability, a new method of signal type selection and signal parameter design is proposed, through analysis of signal energy distribution and plane body＇s frequency response. According to CCAR60--the Appraisal and Use Regulation of Flight Simulator Device, the simulation validation of the FBW passenger airliner＇s longitudinal aerodynamic parameters identification is put forward. The validation result indicates that the designed signal could excite the longitudinal motion mode of the FBW passenger airliner adequately and the multiparameter comparison in simulation meets the objective test request of CCAR60. Meanwhile, the relative errors of aerodynamic parameters are less than 10%.