屋盖MRD隔震升船机结构模型振动台试验

升船机结构塔柱平台处的刚度突变会引起升船机顶部厂房强烈的地震鞭梢效应,在升船机结构模型上设置屋盖磁流变阻尼器MRD(Magnetorhelogical Damper)隔震系统并进行振动台试验,以验证该系统对控制升船机结构顶部厂房地震鞭梢效应的有效性.设计制作了升船机结构模型和磁流变阻尼器隔震系统,分别进行了原结构模型和屋盖MRD隔震结构模型的振动台试验,并对模型结构的动力特性和振动反应进行了对比分析.试验结果表明:MRD隔震系统改变了模型结构的动力特性,有效地减小了升船机结构模型顶部排架层的层间侧移反应.最后进行了数值分析,并与试验结果进行了比较,验证了屋盖MRD隔震-升船机结构系统力学模型与数值分析方法的正确性.     

带有燃气舵的导弹舵面颤振分析方法

传统的颤振分析方法以及商业软件不能分析带有燃气舵的导弹舵面颤振.为此,提出了一个解决带有燃气舵的导弹舵面颤振分析方法.采用动态子结构方法建立带有燃气舵的导弹舵面颤振状态空间运动方程和分析方法,结构质量矩阵和刚度矩阵分成对应于广义坐标的块矩阵;可以考虑不同来流气动效应和翼-体组合对气流的影响,用非定常气动力有理函数拟合法建立时域非定常气动力求解模型.算例数值结果表明:燃气舵舵轴与空气舵舵轴刚度之间的不利耦合会让空气舵颤振速度降低.上述分析方法和计算结果为导弹设计提供参考.     

中俄军演观摩/双雄共舞——谈俄、中军演的进程和意义

最近举行的俄、中“和平使命2005”军事演习引起各国重视，不仅是因为这是俄、中关系发展史的头一遭，更由于此次演习对两国政治、经济关系、地缘政治具有特别重大意义之故，所以其进程和未来发展很值得注意。[编者按]     

Flow separation control on swept wing with nanosecond pulse driven DBD plasma actuators

A 15° swept wing with dielectric barrier discharge plasma actuator is designed.Experimental study of flow separation control with nanosecond pulsed plasma actuation is performed at flow velocity up to 40 m/s. The effects of the actuation frequency and voltage on the aerodynamic performance of the swept wing are evaluated by the balanced force and pressure measurements in the wind tunnel. At last, the performances on separation flow control of the three types of actuators with plane and saw-toothed exposed electrodes are compared. The optimal actuation frequency for the flow separation control on the swept wing is detected, namely the reduced frequency is 0.775, which is different from 2-D airfoil separation control. There exists a threshold voltage for the low swept wing flow control. Before the threshold voltage, as the actuation voltage increases, the control effects become better. The maximum lift is increased by 23.1% with the drag decreased by 22.4% at 14°, compared with the base line. However, the best effects are obtained on actuator with plane exposed electrode in the low-speed experiment and the abilities of saw-toothed actuators are expected to be verified under high-speed conditions.     

Development process of muzzle flows including a gun-launched missile

Numerical investigations on the launch process of a gun-launched missile from the muzzle of a cannon to the free-flight stage have been performed in this paper. The dynamic overlapped grids approach are applied to dealing with the problems of a moving gun-launched missile. The high-resolution upwind scheme(AUSMPW+) and the detailed reaction kinetics model are adopted to solve the chemical non-equilibrium Euler equations for dynamic grids. The development process and flow field structure of muzzle flows including a gun-launched missile are discussed in detail.This present numerical study confirms that complicated transient phenomena exist in the shortly launching stages when the gun-launched missile moves from the muzzle of a cannon to the freeflight stage. The propellant gas flows, the initial environmental ambient air flows and the moving missile mutually couple and interact. A complete structure of flow field is formed at the launching stages, including the blast wave, base shock, reflected shock, incident shock, shear layer, primary vortex ring and triple point.     

航空燃油类型对催化惰化系统性能的影响

在设计了一种催化惰化系统流程并描述其工作原理的基础上,以从油箱中抽吸气体的摩尔流量为基准,推导了流经催化反应器后各气体组分的流量关系,通过质量守恒方程及气体平衡溶解关系,建立了油箱气相空间气体浓度变化的数学模型。选择了RP-3、RP-5和RP-6燃油作为对象,用所建立的数学模型计算了不同载油率和催化反应器效率下的气相空间氧浓度变化关系。研究显示,由于3种燃油的蒸汽压不同,造成从外界环境补气及进入油箱的混合惰气流量不同,从而导致气相空间氧浓度的变化规律差异远大于采用中空纤维膜的机载惰化系统。因此,在设计催化惰化系统时要充分考虑燃油类型对惰化系统性能的影响。     

Effect of sodium tartrate concentrations on morphology and characteristics of anodic oxide film on titanium alloy Ti–10V–2Fe–3Al

The effect of sodium tartrate concentrations on morphology and characteristics of ano-dic oxide film on titanium alloy was investigated. The alloy substrates were anodized in different concentration solutions of sodium tartrate with the addition of PTFE emulsion and their morphol-ogy and characteristics were analyzed. The anodic oxide film presented a uniform petaloid drums and micro-cracks morphology. Additionally, micro-cracks dramatically swelled with the increase of the tartrate concentrations. The thickness of the anodic oxide film increased with the concentra-tions until the concentration reached 15 g/L. The results of Raman analysis illustrate that all sam-ples have similarity in the crystal structure, consisting of mainly amorphous TiO2, some anatase TiO2 and a small amount of rutile TiO2. And the ratios of anatase TiO2 and rutile TiO2 increase with the concentrations until it reaches 15 g/L. Furthermore, the intensity of the peaks increases with enhanced concentrations until the concentration reaches 15 g/L. The corrosion resistance of the anodic oxide film is increased by the sodium tartrate with higher concentrations before 15 g/L. The coefficient of friction of the anodic oxide film reduces with the concentrations until the concentration reaches 15 g/L, then the coefficient of friction of the anodic oxide film increases with the concentrations.     

航空发动机推力测量台架原理误差分析

为研究影响航空发动机推力测量台架系统原理误差的因素及作用,针对发动机弹簧片支撑式推力测量台架,以推力偏心假设为基础建立其力学模型,采用理论分析和仿真验证相结合的方法对某试车台架进行原理误差分析.在给定条件下,台架在竖直平面和水平面内的角偏心远小于推力角偏心,并不会对推力测量造成显著影响,台架结构变形引起的角偏心也很小.相比之下,原理误差影响最大的因素依次为推力角偏心、热变形和弹阻力,原理误差分别为0.38％、0.16％和0.04％,应加以控制.当推力偏心量造成的原理误差不能满足精度指标时,需采用原位加载系统或者矢量推力测量台架来评估.     

基于飞行数据分析的发动机故障诊断系统研究

依据现有的发动机故障诊断方法,研究发动机故障诊断系统,通过对飞行数据中反映发动机性能指标的关键参数数据进行分析,说明系统对航空发动机故障诊断的可行性和必要性,研究结果对于提高发动机维护的快速性和准确性具有重要意义.     

基于Abaqus-Isight的飞机舱门密封件的联合优化设计

为了适应飞机舱门密封件研制周期较短以及正向设计的发展趋势,基于Abaqus-Isight软件对飞机舱门密封件进行仿真分析和优化设计,同时校准了材料参数,提出了两种对飞机舱门密封件的优化设计方法,通过对比得到更优的密封件结构。通过试验得到橡胶与织物的材料参数,基于Abaqus-Isight对材料参数进行校核,通过试验得到的压缩试验曲线对材料参数进行修正,得到与成品试验拟合度更高的材料参数;基于Abaqus-Isight对飞机舱门密封件进行DOE正交试验优化设计,将产品结构参数作为变量,压缩力、接触压力、摩擦损耗能作为优化目标,可以得到局部最优结构;将DOE正交试验结果拟合得到近似模型,通过Isight的近似模型算法得到全局最优结构,综合评估采用近似模型算法能够得到更为优异的结果。