热处理真空淬火工艺的应用

超高强度钢在普通空气炉和盐炉中热处理后，零件表面氧化脱碳相对比较厚，再返回机加车间精加工，其高强度给机加带来不便。通过改进热处理工艺，采用保护气氛炉或真空炉淬火，在满足机械性能要求的前提下，实现少、无氧化热处理。     

大型工程装备可拓制造模型研究

在大型工程装备快速变批量生产需求环境下,基于可拓协同制造资源概念,提出了装备可拓制造"超网络"链制造模式,研究了可拓制造能力单元的RKCQ流模型,构建了可拓制造"超网络"链的参考模型与组建过程模型,并指出使能技术框架体系,可拓制造"超网络"链模式提出的目的在于为大型工程装备制造系统应对不确定性的需求提供制造能力储备.     

Simulation study on slant-to-vertical deviation in two dimensional TEC mapping over the ionosphere equatorial anomaly

With the rapid increase of GPS/GNSS receivers being deployed and operated in China, real-time GPS data from nearly a thousand sites are available at the National Center for Space Weather, China Meteorology Administration. However, it is challenging to generate a high-quality regional total electron content (TEC) map with the traditional two-dimensional (2-D) retrieval scheme because a large horizontal gradient has been reported over east–south Asia due to the northern equatorial ionization anomaly. We developed an Ionosphere Data Assimilation Analysis System (IDAAS), which is described in this study, using an International Reference Ionosphere (IRI) model as the background and applying a Kalman filter for updated observations. The IDAAS can reconstruct a three-dimensional ionosphere with the GPS slant TEC. The inverse slant TEC correlates well with observations both for GPS sites involved in the reconstruction and sites that are not involved. Based on the IDAAS, simulations were performed to investigate the deviation relative to the slant-to-vertical conversion (STV). The results indicate that the relative deviation induced by slant-to-vertical conversion may be significant in certain instances, and the deviation varies from 0% to 40% when the elevation decreases from 90° to 15°, while the relative IDAAS deviation is much smaller and varies from −5% to 15% without an elevation dependence. Compared with ‘true TEC’ map derived from the model, there is large difference in STV TEC map but no obvious discrepancy in IDAAS map. Generally, the IDAAS TEC map is much closer to the “true TEC” than is STV TEC map is.     

Dry Grinding of Titanium Alloy Using Brazed Monolayer cBN Wheels Coated with Graphite Lubricant

The purpose of this study is to investigate the effect of graphite lubricant on the dry grinding performance of Ti-6Al-4Valloy,using graphite-coated,brazed monolayer,cubic boron nitride(cBN)wheels.Brazed monolayer cBN wheels both with and without a coating of polymer-based graphite lubricant are fabricated and subsequently compared for grinding performance based on measurements of grinding temperature,surface microstructure and grinding.In terms of grinding temperature,considerable improvement in dry grinding performance of titanium alloy is achieved using coated brazed monolayer cBN wheels,with 42%—47%reduction in grinding temperature as opposed to uncoated wheels.The grinding force ratio with the coated wheels is observed to remain between 1.45to1.85despite material removal rates reaching up to 1 950mm3/mm.No tangible change in ground titanium surface microstructure is noted as a result of grinding with the graphite coated wheels as opposed to the uncoated ones.     

整体构件周向叶片电解加工流场设计及实验

针对整体构件周向叶片的特点与加工难点,设计了带有内置绝缘腔的电解套型加工工具阴极,建立了两种进液方式的流场三维模型,采用有限元法对两种进液方式的流场进行仿真计算。计算结果表明由绝缘腔的叶盆叶背两侧进液并对出液口进行优化的流场方式较好,电解液流速较高且流场较均匀。使用根据有限元仿真结果设计的阴极开展实验,结果表明实验与流场仿真结果相符,采用优化流场模型的加工过程流场稳定,加工效率较高。     

适应拓扑变化的拥塞最小化网络更新策略

软件定义网络的出现推动了航空集群机载网络的发展，同时也为机载网络的一致性更新带来了挑战。针对拓扑变化导致的网络更新期间可用路径失效问题，提出适应拓扑变化的拥塞最小化网络更新策略。首先，为减少可用路径失效带来的数据包丢失，在更新之前采用重路由机制进行处理；然后，针对重路由机制可能引起的网络拥塞，设计了贪婪流迁移算法缓解拥塞；最后，通过瞬时拥塞最小化更新算法完成整个网络更新。仿真结果表明：与传统的拥塞一致性更新算法相比，所提更新策略用规则开销、瞬时网络拥塞方面的少量提高换取了网络更新期间数据包丢失的显著降低。     

几种流量测量仪表的选择与节能

对国内能源系统常用的几种工业流量测量仪表实际应用选择及节能问题，简要地进行了原理分析和实际应用分析，供使用者优选流量仪表参考。     

三角形截面高柔结构横风向振动的风洞试验研究

本文介绍了正三角形截面高柔结构模型在均匀流场和湍流场中三种迎角下的横风向风振响应风洞试验结果，分析了三角形截面高柔结构的横风向涡激振动现象与驰振危险性，获得了一些数据和结论。     

Internet2—未来的Internet

介绍了Internet2的发展、基本结构和网络互连等问题，描述了与Internet2紧密相关的gigaPoP的组成，说明了必须考虑的参数和约束条件，阐明了所要采用的路由和服务质量协议。