Menger PM-空间上复合映射不动点定理的推广

设（X，F，△）和（Y，－↑F，△）是两个完备的MengerPM－空间，△是连续的H型t－范数，函数Φ（t）满足条件（Φ1)，本文在映射T：X→Y和S：Y→X满意更一般的条件下给出了关于复合映射TS和ST的不动点定理。这一定量进一步推广了Fisher,Sehgal和Bharucha-Reid等的有关结果，也是作者“MengerPM－空间上复合映射的不动点定理”一文的一般推广，最后给出了几个有用的结果作为本文主要定理的推广论。     

GENERATION AND APPLICATION OF UNSTRUCTURED ADAPTIVE MESHES WITH MOVING BOUNDARIES

INTRODUCTIONMany engineering applications require thenumerical prediction of strongly unsteady flowsinteracting with moving bodies.A case in pointis that the detailed calculation of sphere motionsin an unsteady field induced by blast waves is akey issue to determine the drag force exerting up-on the sphere by the surrounding gas and,inturn,to reveal the mechanism of unsteady effectson the drag coefficient.To cope with such pro-blems,one should simulate unsteady flows withmoving boundary co…     

芬顿反应与TiO2光催化氧化甲基橙的研究

分别采用Fe^2＋及TiO2作为光催化剂，考察了它们对甲基橙的降解率。结果表明：在芬顿反应体系中加人NaOH时，可有效地阻止反应的进行；pH=4时，光催化氧化率最高；甲基橙溶液浓度越低，光催化氧化效果越好；改进后的光催化剂对甲基橙的分解率明显提高，不会生成草酸的铁盐沉淀；H2O2＋FeC2O4、H2O2＋FeSO4、TiO2三种体系的光催化性能大小依次为H2O2＋FeC2O4〉TiPO2〉H2O02＋FeSO4。     

光与影的追逐

青瓦红墙。墙红得饱满，瓦绿得圆润。 几根老树丫慵懒地在阳光中打着盹儿。而阳光却把树的过往与心事一一泄露。这样一个聊胜于无的无语境界被墙一一窥视。     

温度对接触热阻的影响

介绍了一种采用实验的方法研究温度对接触热阻的影响及所得到的结果。当多晶体固体表面相互接触时，随着接触面温度升高，接触热阻呈下降规律。产生这一现象的机理是由于当接触面温度变化时。接触表面的微观形状发生了变化。从而导致了接触热阻的变化。当多晶体固体表面相互接触时，对应同一宏观接触状况其微观接触状况却不尽相同。通过实验获得了接触热阻的变化范围和接触热阻随温度变化的数据带。实验中观察到温度使固体表面产生的变形有些能够恢复，有些则不能．本文提出了能否建立温度与变形、时间三者关系的假设，当固体接触表面温度较高时，还提出了一种研究接触热阻的方法。     

飞机型架参数化设计系统的开发与应用

本文介绍了AutoCAD二次开发飞机型架参数化设计系统的结构、功能、应用。说明对AutoCAD进行二次开发使得工装型架设计绘图效率大为提高。     

颤振主动抑制中的非线性问题

本文采用谐波平衡法,定量地解释了机翼颤振主动抑制风洞试验中出现的极限环现象。提出了比较精确的计及极限环基阶谐波与三阶谐波的分析计算方法。指出在采用液压舵机的情况下,伺服阀的不灵敏区是出现极限环现象的一个主要原因。     

Vibration suppression of thin-walled workpiece machining considering external damping properties based on magnetorheological fluids flexible fixture

Milling of the thin-walled workpiece in the aerospace industry is a critical process due to the high flexibility of the workpiece. In this paper, a flexible fixture based on the magnetorheological(MR) fluids is designed to investigate the regenerative chatter suppression during the machining.Based on the analysis of typical structural components in the aerospace industry, a general complex thin-walled workpiece with fixture and damping constraint can be equivalent as a rectangular cantilever beam. On the basis of the equivalent models, natural frequency and mode shape function of the thin-walled workpiece is obtained according to the Euler–Bernoulli beam assumptions. Then,the displacement response function of the bending vibration of the beam is represented by the product of all the mode shape function and the generalized coordinate. Furthermore, a dynamic equation of the workpiece-fixture system considering the external damping factor is proposed using the Lagrangian method in terms of all the mode shape function and the generalized coordinate, and the response of system under the dynamic cutting force is calculated to evaluate the stability of the milling process under damping control. Finally, the feasibility and effectiveness of the proposed approach are validated by the impact hammer experiments and several machining tests.     

带活性剂的氩弧焊接(A-TIG)技术工艺研究

对A—TIG技术的发展情况、机理进行了阐述，通过课题研究自主研制出了针对ICr18Ni9Ti和S-03两种材料的焊接用活性剂，用所研制出的活性剂进行了厚度为6mm、8mm的1Cr18Ni9Ti平板对接试件及6mm厚度S-03钢材料平板对接试件的自动和手工A-TIG焊接，完全满足QJ1842-95《结构钢、不锈钢熔焊技术条件》Ⅰ级接头要求，表明所研制的活性剂及工艺技术具有较强的工程适应性。     

红外地平仪摆动扫描装置自适应控制器的FPGA实现

本文介绍了红外地平仪自适应摆动控制器ＦＰＧＡ原理样机的有关研制结果。针对新型长寿命红外地平仪的摆动扫描控制装置，基于系统特征分析，提出了能跟踪摆动装置的固有频率、同时保证摆幅稳定的一套自适应控制方案，并且研制出ＦＰＧＡ芯片原理样机，最终通过了实验验证并得到满意的实验结果。