旋转变压器输出信号自动标定

旋转变压器输出以角位置正余弦为包络的调幅信号,一般通过检波与解调获取角位置及角速度信息.检波后信号往往存在直流偏置、幅值不等和相位偏移,对其进行标定是实现高精度解调的前提.针对检波后信号的标定问题,提出了一种离线自动标定方法.设计状态观测器,对检波后两路信号的幅值及直流偏置进行估计;构造二元二次目标函数,利用梯度估计法,获取相位偏移.理论分析表明,与仅采用梯度估计法相比,此方法避免了目标函数多解问题.实验结果表明,此方法参数选择容易,具有较高的精度,是完全可行的.      

资源约束条件下舰艇编队多智能体协作规划

从分析舰艇编队对海作战的流程出发,在决策过程中引入多智能体系统(MAS,Multi-Agent System)理论,建立了编队协同反舰作战Agent模型.针对舰艇编队Agent协作规划过程中受资源约束产生资源占用冲突的问题,建立一种主从式结构多Agent协作规划模型,并提出一种集中与分布规划相结合的MAS协作规划方法.仿真实例表明:该方法可有效实现作战编队各Agent之间的协作与协调,保证舰艇编队在满足资源约束条件下实现预期战术目标.      

高速滚子轴承运动特性的动态模拟

在高速轻载的工况下 ,滚子轴承的打滑蹭伤及由于滚子歪斜引起的滚子端面磨损已成为滚子轴承的主要失效原因。本文根据牛顿运动定律 ,建立了滚子的动力学模型 ,并对滚子轴承径向载荷分布和油膜拖动力的计算进行了详细讨论。利用本文所编制的软件 ,对滚子和保持架的打滑以及滚子的歪斜运动进行了动态模拟 ,得到与实际相符的结果 ,可用为实际轴承设计。     

纳米雷达隐身材料研究进展

从纳米材料的结构特征出发，简单阐述了纳米材料在雷达隐身方面的应用前景及近年来国内外不同的纳米雷达隐身材料的制备方法、结构特点和雷达吸波性能。结合实际需求和国外发展动态指出了我国未来纳米雷达隐身材料的发展方向。     

C/C—SiC复合材料的制备与性能

采用化学气相渗透（CVI）法和液相浸渍有机物先驱体混合工艺制备了C／C－SiC复合材料，并对复合材料力学性能、抗烧蚀性能和抗氧化性能进行表征。结果表明：制备的C／C－SiC复合材料在基本保证C／C复合材料力学性能的基础上，抗氧化和抗烧蚀性能得以大幅度提高，提出了制备兼具C／C复合材料与陶瓷材料的技术途径。     

Aperture error mitigation via local-state estimation for frequency-based emitter location

This paper considers the problem of locating a stationary coherent emitter via a single moving platform making frequency measurements in the presence of aperture state uncertainty. It is shown that the estimated emitter location is most sensitive to the receiving aperture velocity uncertainty. The required aperture velocity accuracy is determined through a noninfinitesimal perturbation analysis. A solution to location accuracy enhancement with a minimal hardware addition is attempted. It is shown that this can be achieved by mounting a high-resolution tri-axis microelectromechanical systems (MEMS) accelerometer at the aperture to measure its velocity, which can deviate significantly from that estimated by the on-board navigation system. The Doppler shifts of the GPS signal carrier frequency, whenever it can be acquired through the aperture, are also considered as a way to aid the aperture velocity measurement. A decentralized, federated processing method for the aperture velocity estimate referenced at the aperture, integrating all measurement data, is presented. An upper bound for the error of aperture velocity estimate is derived. The potential for significant accuracy enhancement for emitter location is demonstrated.     

推进剂药浆混合均匀性研究

用Ｈａａｋｅ流变仪研究了高固体含量丁羟推进剂的混合均匀性,提出了用复合粘度和复合模量作混合均匀性表征参数的评价方法。研究结果表明,高固体含量丁羟三组元配方的预混阶段需１５ｍｉｎ～２０ｍｉｎ快速混合,总预混时间以３０ｍｉｎ～３５ｍｉｎ为宜。     

Time delay estimation with multiple looks in colored Gaussian noise

We present an efficient algorithm for high resolution time delay estimation in colored Gaussian noise with multiple looks. By using a relaxation-based optimization approach and exploiting the Toeplitz property of the noise covariance matrix, the enhanced new algorithm can achieve the corresponding Cramer-Rao bounds (CRBs) with a very small number of independent looks     

烟丝配料单片机控制系统

本文介绍了配料生产过程中单片机控制系统的硬件结构及软件流程。由于硬件和软件设计上都采用了模块化的结构,所以便于安装调试,整个系统可推广到诸如水泥、矿产、食品加工等生产中。     

计算机网络安全及安全审计技术研究

通过对计算机安全和安全审计问题的简要分析,并结合网络系统的特点,力图较系统深入地探讨计算机网络安全及其审计技术;在此基础上,提出了一个网络安全审计模型。