飞机典型结构细节——紧固孔随机裂纹扩展分析

根据7475T761铝合金犬骨型试样在随机谱载荷作用下的试验结果,采用两种随机裂纹扩展分析的方法,即通用的和解析的分析方法,研究了飞机典型结构细节——紧固孔中疲劳裂纹扩展的概率累积损伤,给出了概率裂纹扩展轨迹、裂纹扩展损伤累积分布及裂纹超出数的概率。试验结果与预测结果的比较表明,两者十分吻合,能满足工程精度的要求,为飞机结构的耐久性和损伤容限评估提供了适用的分析手段。     

变薄拉深的上限法分析

根据上限法原理建立了一种适用于分析变薄拉深的上限模型,包括两个用于优化上限解的独立参数。通过优化计算,变薄拉深力理论值与实验值吻合良好;用该模型研究了变薄拉深系数、凹模半锥角、原始筒形件内外径比、定径带相对长度以及内外摩擦因子等主要工艺参数对变薄拉深力的影响规律。     

人参质量的典型相关识别

本文给出了利用典型相关性分析研究人参所含的化学成分与其疗效关系的方法，计算出人参化学成分药理作用的权重。     

直升机旋翼试验台数据采集系统的改进与设计

本文详细介绍了直升机旋翼试验台数据采集系统的功能，硬件配置以及软件设计方法。     

用纤内Bragg光栅进行动态应变测量的研究

描述了用纤内Bragg光栅进行动态应变测量研究的意义，原理和方法，提出了两种用纤内Bragg光栅动态应变测量时进行Bragg波长偏移量的解调方法；光干涉相位检测Bragg光栅反射波长偏移的解调方法和用DWDM密集波分复用器解调Bragg波长的方法，前者适用于高频宽带动态应变测量，后者适用于有限频率或中等频率响应的动态应变测量。     

Analysis of crack opening stresses for center- and edge-crack tension specimens

Accurate determination of crack opening stress is of central importance to fatigue crack growth analysis and life prediction based on the crack-closure model. This paper studies the crack opening behavior for center- and edge-crack tension specimens. It is found that the crack opening stress is affected by the crack tip element. By taking the crack tip element into account, a modified crack opening stress equation is given for the center-crack tension specimen. Crack surface displace- ment equations for an edge crack in a semi-infinite plate under remote uniform tension and partially distributed pressure are derived by using the weight function method. Based on these displacements, a crack opening stress equation for an edge crack in a semi-infinite plate under uniform tension has been developed. The study shows that the crack opening stress is geometry-dependent, and the weight function method provides an effective and reliable tool to deal with such geometry depen- dence.     

Quantitative Rectangular Notch Detection of Laser-induced Lamb Waves in Aluminium Plates with Wavenumber Analysis

It is difficult to quantitatively detect defects by using the time domain or frequency domain features of Lamb wave signals due to their dispersion and multimodal characteristics.Therefore,it is important to discover an intrinsical parameter of Lamb waves that could be used as a damage sensitive feature.In this paper,quantitative defect detection in aluminium plates is carried out by means of wavenumber analysis approach.The wavenumber of excited Lamb wave mode is a fixed value,given a frequency,a thickness and material properties of the target plate.When Lamb waves propagate to the structural discontinuity,new wavenumber components are created by abrupt wavefield change.The new wavenumber components can be identified in the frequency-wavenumber domain.To estimate spatially dependent wavenumber values,a short-space two-dimensional Fourier transform(FT)method is presented for processing wavefield data of Lamb waves.The results can be used to determine the location,size and depth of rectangular notch.The analysis techniques are demonstrated using simulation examples of an aluminium plate with a rectangular notch.Then,the wavenumber analysis method is applied to simulation data that are obtained through a range of notch depths and widths.The results are analyzed and rules of the technique with regards to estimating notch depth are determined.Based on simulation results,guidelines for using the technique are developed.Finally,experimental wavefield data are obtained in aluminium plates with rectangular notches by a full noncontact transceiving method,i.e.,laser-laser method.Band-pass filtering combined with continuous wavelet transform is used to extract a certain frequency component from the full laser-induced wavefield with wide band.Shortspace two-dimensional FT method is used for further processing full wavefield data at a certain frequency to estimate spatially dependent wavenumber values.The consistency of simulation and experimental results shows the effectiveness of proposed wavenumber method for quantitative rectangular notch detection.     

磁尾瓣区的场向电流

本文利用ISEE-2卫星的磁场和粒子资料(电子:75keVδ<1300keV,质子:170keVp<400keV),发现在磁尾远离等离子片的尾瓣区,常常同时探测到粒子脉冲和横向磁场扰动,表明有场向电流片存在。电流片的积分强度在3.3—21mA/m之间,与Frank等在磁尾等离子片边界上测量到的场向片电流积分强度可相比较。电流片总是成双成对,电流片的强度与AE指数或亚暴的关系密切。和磁层其他区域不同,在磁尾瓣区,经常探测到△B_x和△B_y同时存在,且△B_x和△B_y可相比拟的情形,它们可以用运动的线电流或不均匀密度的电流片来解释。     

大功率狭缝式活塞激励器流场测量与分析

研制了一种大功率活塞射流激励器,出口瞬时速度峰值可达0.3Hz,通过对活塞激励器射流流场测量,得到激励器出口流场速度、涡量分布,分析得到激励器合成射流流动结构与特征,通过采用活塞激励器控制同轴射流掺混,实验结果证明此种活塞激励器可以用于相对较高的速度流场的主动流动控制.利用提出的设计方法设计合成射流激励器可以在激励器出口形成稳定的对涡结构,采用一定的激励频率即可对喷管气流掺混进行有效控制.研究表明,合成射流激励器作为主动流动的执行机构,在航空动力排气系统具有潜在的重要价值.