Single-stage converters for PV lighting systems with MPPT andenergy backup

Single-stage converters (SSCs) are proposed for applications of photovoltaic powered lighting system (PPLS). The synchronous switch technique is employed to develop the SSCs which can fulfill maximum power point tracking (MPPT), battery charging, discharging, and lamp ballasting features. Several typical SSCs are discussed. One of the proposed SSCs, which is the integration of a buck-boost charger/discharger and a class-D series resonant parallel loaded inverter, is analyzed and designed into a PPLS. Both pulsewidth modulation (PWM) and variable-frequency controls are used to govern the system operation. The controller is implemented on a single-chip microprocessor. Simulated and experimental results of the proposed system for driving up to sixteen GE TBX 26 W fluorescent lamps are used to verify the theoretical prediction and feasibility. The proposed system has a simple configuration, as well as a zero voltage switching (ZVS) feature, and can achieve the same functions as those in conventional systems when abrupt insolation changes do not occur frequently. These result in the inherent merits of lower cost, more compact size and possibly achieving higher reliability over conventional systems     

REMOTE SENSING IMAGE CODING METHOD COMBINING WAVELET TRANSFORM WITH CLASSIFIED VECTOR QUANTIZATION

A new remote sensing image coding scheme based on the wavelet transform and classified vector quantization (CVQ) is proposed. The original image is first decomposed into a hierarchy of 3 layers including 10 subimages by DWT. The lowest frequency subimage is compressed by scalar quantization and ADPCM. The high frequency subimages are compressed by CVQ to utilize the similarity among different resolutions while improving the edge quality and reducing computational complexity. The experimental results show that the proposed scheme has a better performance than JPEG, and a PSNR of reconstructed image is 31～33 dB with a rate of 0.2 bpp.     

典型直升机完整性维持关键技术需求分析研究

典型直升机是实施立体突击作战的重要力量，在火力支援、立体补给、综合勤务保障等方面发挥着重要作用。针对其构造形式和作战使用要求，直升机在低空超低空低速执行任务时，使用场景中面临低空和地面的多种威胁，致使其服役环境和作战环境更加恶劣。本文通过分析直升机在作战中面临的威胁特点，阐述在直升机设计和使用维护过程中，综合防护能力、环境适应能力、战伤抢修能力对直升机作战完整性的影响，通过合理设计机体结构，提升生存能力，提升海上、高原、沙尘等环境适应能力，建立完备的战伤抢修能力来保证直升机使用的完整性，满足使用需求。     

多发飞机着陆进场最小操纵速度人机闭环仿真

为了提高着陆进场最小操纵速度(VMCL)的分析预测精度,提出了一种通过人机闭环数学仿真来计算多发飞机着陆进场VMCL的方法。考虑临界发动机突然停车后拉力的衰减过程、驾驶员意识到发动机失效后采取操纵的时间延迟,以及符合VMCL验证试飞操纵特点的驾驶员模型,建立了能够真实模拟VMCL验证试飞过程及驾驶员操纵策略的某型四发螺旋桨飞机人机闭环仿真数学模型。仿真结果表明,该方法可以准确模拟VMCL验证试飞时发动机衰减特性、舵机动态特性、驾驶员反应延迟等因素的影响,以及飞机各运动参数的动态变化过程。     

Attitude and orbit control systems for the LISA Pathfinder mission

The main purpose of the LISA Pathfinder mission is to provide in-orbit validation of the critical technologies necessary for LISA (Laser Interferometer Space Antenna), aiming at detecting gravitational waves generated by very massive objects such as black holes. The spacecraft consists of a Science Module (SCM) and a Propulsion Module (PRM). The former performs the science experiment, and the later provides the propulsive capability to raise the spacecraft from the injection orbit to the operational orbit at around L1 and is then separated from the former. The Spacecraft Attitude and Orbit Control System (AOCS) is actually composed of three distinct systems to fulfill the needs of the whole mission: – Composite AOCS, used to reach L1, aims at raising the Perigee through a succession of about 10 boosts performed with high thrust chemical propulsion; – Micro-propulsion AOCS takes over once the separation of the SCM from PRM has occurred and is based on micro-propulsion systems (micro-Newton electrical thrusters); – Drag-Free Attitude Control System (DFACS) is then used to perform science experiments. This article provides a comprehensive overview of the AOCS architecture, requirements, selected sensors and actuators, system design & evolution, and achieved performances. It focuses in particular on the Composite AOCS and the Micro-propulsion AOCS and will analyze the challenges of using micro-Newton electric propulsion.     

检波器谐振频率数学模型及其频响误差的修正

峰值检波器的频响误差在高频段主要是由分布参数产生的高频谐振误差。本文利用实测数据建立了检波器谐振频率数学模型，根据模型的预测值对检波器和了频响误差修正。计量检定表明修正后的频响误差大大减小。     

X-47B无人空战系统及其对抗途径分析

X-47B型无人空战系统是当今最先进的无人机系统之一,势必给现有电子对抗技术及装备带来严重冲击.从其任务使命、系统功能、特色技术入手,分析对其实施电子对抗的技术难点和可能的薄弱环节,探讨对X-47B进行侦察探测和电子对抗的技术途径.     

"需求拉动式"航空器材需求预测与控制模式

提出了"需求拉动式"航空器材库存控制模式,建立了基于可靠性分析的航空器材需求预测模型.该模型通过对航空器材使用信息进行可靠性分析,得出零件可靠性寿命函数,并根据给定可靠度下的零件寿命预测航空器材需求时间.最后对视情维护下的周转件需求预测与库存控制进行了案例分析.     

The effect of the longitudinal propagating waves on the electron acceleration in the reconnecting current sheet

Based upon the most efficient electron acceleration near the midplane of 3D non-neutral driven reconnecting current sheet (RCS) and the electrostatic wave excitation by the drift Maxwellian distribution of electrons in Vlasov simulation, we assume that the electrostatic waves mainly propagate opposite to the reconnecting electric field and investigated how these waves affect the electron acceleration. The main results are: (1) when the electron’s velocity equals to the phase speed of the waves, they will be trapped and have the different accelerating characteristics from the untrapped electrons through solving the momentum equations of electrons analytically; (2) the test particle simulations further prove that the number of the energetic electrons decreases with the increasing intensity of unstable waves, and the distribution of the energetic electrons takes on the double power-law.     

磁暴期间环电流离子中性原子成像的模拟与观测比较研究

采用已经建立的环电流离子解析模型,结合Chamberlain地冕中性层模型,研究了2004年11月一次大磁暴期间的环电流区域中性原子(ENA)图像.结果表明,模拟的ENA图像与TC-2卫星搭载的中性原子成像仪(NUAUD)的观测图像在方位角或地方时分布、高度或纬度分布和能谱分布方面存在一定的差异.如果依据磁暴发展的不同阶段来选择环电流离子模型的方位角不对称因子和通量最大方向的方位角,增大地冕中性层在低高度区域的密度或者考虑氢(H)以外的其他中性成分,改进注入边界处的离子能谱分布函数,且考虑不同种类环电流离子的比例随磁暴发展可能发生的变化,该模型有望产生更符合观测的模拟ENA图像.