基于鲁棒故障检测滤波器的传感器故障诊断

本文讨论了鲁棒故障检测滤波器在喷气式发动机传感器故障诊断中的应用。鲁棒故障检测滤波器方法使残差既有干扰解耦特性又有方向特性。该滤波器的设计结合了未知输入观测器原理与Beard故障检测滤波器原理。利用未知输入观测器产生的残差对未知输入(干扰)具有鲁棒性,而特定方向性是基于BFDF技术获得的。最后举例说明了该方法的可行性和有效性。     

液体远地点发动机工作期间卫星姿态的自适应控制

本文将全系数自适应控制方法用于带有液体晃动和挠性太阳帆板的三轴稳定地球同步轨道卫星在远地点发动机工作期间的姿态自适应控制。仿真结果表明,用全系数自适应控制方法设计的控制器,其动态性能好,对参数变化的适应性强,抗干扰能力强,鲁棒性好,性能指标完全满足设计要求。     

基于PCI总线的PC机再入遥测站设计

根据再入遥测的特点 ,提出基于 PCI总线和 Windows平台的 PC机再入遥测站的体系结构 ,重点对其关键技术即多通道高速数据的实时传输与存储技术进行研究     

基于FPGA的数据接口电路设计

鉴于FPGA设计数字电路的多种优势,针对星上相机输出数据格式和地面采集系统接收数据格式不一致性,改变传统的设计方式,进行了基于FPGA的数据接口电路设计。文章描述了电路设计的基本原理、实现方案、时序仿真,并对电路设计中遇到的关键问题的解决进行了阐述。其中实现方案包括FPGA外围电路硬件设计和FPGA芯片内软件时序设计。     

Precipitating Protons and Their Role in Ionization of the Polar Ionosphere

Spatial distributions of the electron density in the latitude range 60°–90° N were calculated on the basis of a physical model of the E and lower Fregions of the high-latitude ionosphere using statistical models of auroral proton and electron precipitation. It is shown that precipitating protons can play the key role in the ionization of the Eregion in the dusk and midnight sectors of the auroral oval. However, quantitative estimates of the contribution of protons to the ionization depend on the used statistical models of electron precipitation. Comparison of the electron density profiles calculated for two incoherent scatter radars, EISCAT (Tromsö) and ESR (Svalbard), for simultaneous precipitation of electrons and protons and for electron precipitation only show that the influence of protons is the most significant in the dusk sector over the EISCAT radar and in the midnight sector over the ESR radar. The results presented indicate the need to take protons into account when radar data are used to derive precipitating electron spectra.     

提高航天传输型CCD相机地面像元分辨率方法研究

文章首先对空间传输型遥感相机提高像元分辨率的几种常规和非常规方法做了简介,在分析这些方法的优缺点以及以采样定理为依据分析我国现有CCD相机光学截止频率和CCD采样频率存在的矛盾的基础上探讨了高模式采样技术和超模式采样技术,经过比较这两种采样模式,认为超模式采样技术更具有工程可行性和优越性。然后对超模式采样计算机图像仿真结果进行了分析。     

导弹子母弹子弹抛撒弹道模型及数字仿真

建立了导弹子母弹抛撒弹道模型，并编制了抛撒弹道仿真程序，仿真结果与靶场试验结果一致，仿真程序也适用于所有弹道导弹子母弹撒 轴对称子弹的无控弹道仿真，可为地地导弹子母作战使用及作战效能研究提供强有力的分析工具。     

激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.