3-D Radar Based on Phase-in-Space Principle

A height-finding technique utilizing the relative phase between a series of point sources of a traveling-wave array is described. The point sources in the focal region of a torus antenna are used to control the phase of the antenna elevation pattern in space. Signals received from a given beam angle will arrive at each terminal of the traveling-wave feed with a different phase. By comparing this phase with a reference phase, the angular direction of an arriving plane wave can be measured with considerable accuracy. Thus a radar system with a single antenna and feed structure can be employed to yield instantaneous height coverage along with the usual range data.     

Instrument Boom Mechanisms on the THEMIS Satellites; Magnetometer, Radial Wire, and Axial Booms

The five “Time History of Events and Macroscale Interactions during Substorms” (THEMIS) micro-satellites launched on a common carrier by a Delta II, 7925 heavy, on February 17, 2007. This is the fifth launch in the NASA MeDIum class EXplorer (MIDEX) program. In the mission proposal the decision was made to have the University of California Berkeley Space Sciences Laboratory (UCB-SSL) mechanical engineering staff provide all of the spacecraft appendages, in order to meet the short development schedule, and to insure compatibility. This paper describes the systems engineering, design, development, testing, and on-orbit deployment of these boom systems that include: the 1 and 2 meter carbon fiber composite magnetometer booms, the 40 and 50 m tip to tip orthogonal spin-plane wire boom pairs, and the 6.3 m dipole stiff axial booms.     

A combinatorial approach to biochemical space: description and application to the redox distribution of metabolism

Redox chemistry is central to life on Earth. It is well known that life uses redox chemistry to capture energy from environmental chemical energy gradients. Here, we propose that a second use of redox chemistry, related to building biomass from environmental carbon, is equally important to life. We apply a method based on chemical structure to evaluate the redox range of different groups of terrestrial biochemicals, and find that they are consistently of intermediate redox range. We hypothesize the common intermediate range is related to the chemical space required for the selection of a consistent set of metabolites. We apply a computational method to show that the redox range of the chemical space shows the same restricted redox range as the biochemicals that are selected from that space. By contrast, the carbon from which life is composed is available in the environment only as fully oxidized or reduced species. We therefore argue that redox chemistry is essential to life for assembling biochemicals for biomass building. This biomass-building reason for life to require redox chemistry is in addition (and in contrast) to life's use of redox chemistry to capture energy. Life's use of redox chemistry for biomass capture will generate chemical by-products-that is, biosignature gases-that are not in redox equilibrium with life's environment. These potential biosignature gases may differ from energy-capture redox biosignatures.     

An astrophysical view of Earth-based metabolic biosignature gases

Microbial life on Earth uses a wide range of chemical and energetic resources from diverse habitats. An outcome of this microbial diversity is an extensive and varied list of metabolic byproducts. We review key points of Earth-based microbial metabolism that are useful to the astrophysical search for biosignature gases on exoplanets, including a list of primary and secondary metabolism gas byproducts. Beyond the canonical, unique-to-life biosignature gases on Earth (O(2), O(3), and N(2)O), the list of metabolic byproducts includes gases that might be associated with biosignature gases in appropriate exoplanetary environments. This review aims to serve as a starting point for future astrophysical biosignature gas research.     

Did mineral surface chemistry and toxicity contribute to evolution of microbial extracellular polymeric substances?

Abstract Modern ecological niches are teeming with an astonishing diversity of microbial life in biofilms closely associated with mineral surfaces, which highlights the remarkable success of microorganisms in conquering the challenges and capitalizing on the benefits presented by the mineral-water interface. Biofilm formation capability likely evolved on early Earth because biofilms provide crucial cell survival functions. The potential toxicity of mineral surfaces toward cells and the complexities of the mineral-water-cell interface in determining the toxicity mechanisms, however, have not been fully appreciated. Here, we report a previously unrecognized role for extracellular polymeric substances (EPS), which form biofilms in shielding cells against the toxicity of mineral surfaces. Using colony plating and LIVE/DEAD staining methods in oxide suspensions versus oxide-free controls, we found greater viability of wild-type, EPS-producing strains of Pseudomonas aeruginosa PAO1 compared to their isogenic knockout mutant with defective biofilm-producing capacity. Oxide toxicity was specific to its surface charge and particle size. High resolution transmission electron microscopy (HRTEM) images and assays for highly reactive oxygen species (hROS) on mineral surfaces suggested that EPS shield via both physical and chemical mechanisms. Intriguingly, qualitative as well as quantitative measures of EPS production showed that toxic minerals induced EPS production in bacteria. By determining the specific toxicity mechanisms, we provide insight into the potential impact of mineral surfaces in promoting increased complexity of cell surfaces, including EPS and biofilm formation, on early Earth. Key Words: Mineral toxicity-Bacteria-EPS evolution-Biofilms-Cytotoxicity-Silica-Anatase-Alumina. Astrobiology 12, 785-798.     

Gypsum-permineralized microfossils and their relevance to the search for life on Mars

Abstract Orbital and in situ analyses establish that aerially extensive deposits of evaporitic sulfates, including gypsum, are present on the surface of Mars. Although comparable gypsiferous sediments on Earth have been largely ignored by paleontologists, we here report the finding of diverse fossil microscopic organisms permineralized in bottom-nucleated gypsums of seven deposits: two from the Permian (～260?Ma) of New Mexico, USA; one from the Miocene (～6?Ma) of Italy; and four from Recent lacustrine and saltern deposits of Australia, Mexico, and Peru. In addition to presenting the first report of the widespread occurrence of microscopic fossils in bottom-nucleated primary gypsum, we show the striking morphological similarity of the majority of the benthic filamentous fossils of these units to the microorganisms of a modern sulfuretum biocoenose. Based on such similarity, in morphology as well as habitat, these findings suggest that anaerobic sulfur-metabolizing microbial assemblages have changed relatively little over hundreds of millions of years. Their discovery as fossilized components of the seven gypsiferous units reported suggests that primary bottom-nucleated gypsum represents a promising target in the search for evidence of past life on Mars. Key Words: Confocal laser scanning microscopy-Gypsum fossils-Mars sample return missions-Raman spectroscopy-Sample Analysis at Mars (SAM) instrument-Sulfuretum. Astrobiology 12, 619-633.     

Three-dimensional confocal optical imagery of precambrian microscopic organisms

A major difficulty that has long hindered studies of organic-walled Precambrian microbes in petrographic thin sections is the accurate documentation of their three-dimensional morphology. To address this need, we here demonstrate the use of confocal laser scanning microscopy. This technique, both non-intrusive and non-destructive, can provide data by which to objectively characterize, in situ and at submicron-scale resolution, the cellular and organismal morphology of permineralized (petrified) microorganisms. Application of this technique can provide information in three dimensions about the morphology, taphonomy, and fidelity of preservation of such fossils at a spatial resolution unavailable by any other means.     

Sulfate content of Europa's ocean and shell: evolutionary considerations and some geological and astrobiological implications

Recent models for the origin of Jupiter indicate that the Galilean satellites were mostly derived from largely unprocessed solar nebula solids and planetesimals. In the jovian subnebula the solids that built Europa were first heated and then cooled, but the major effect was most likely partial or total devolatilization, and less likely to have been wholesale thermochemical reprocessing of rock + metal compositions (e.g., oxidation of Fe and hydration of silicates). Ocean formation and substantial alteration of interior rock by accreted water and ice would occur during and after accretion, but none of the formation models predicts or implies accretion of sulfates. Europa's primordial ocean was most likely sulfidic. After accretion and later radiogenic and tidal heating, the primordial ocean would have interacted hydrothermally with subjacent rock. It has been hypothesized that sulfides could be converted to sulfates if sufficient hydrogen was lost to space, but pressure effects and the impermeability of serpentinite imply that extraction of sulfate from thoroughly altered Europa-rock would have been inefficient (if indeed Mg sulfates formed at all). Permissive physical limits on the extent of alteration limit the sulfate concentration of Europa's evolved ocean to 10% by weight MgSO(4) or equivalent. Later oxidation of the deep interior of Europa may have also occurred because of water released by the breakdown of hydrated silicates, ultimately yielding S magma and/or SO(2) gas. Geological and astrobiological implications are considered.     

The light and velocity curve bumps for BW Vulpeculae

Conclusions We have attempted to model bumps in the light and radial velocity curves of the Beta Cephei star BW Vulpeculae. Two mechanisms, a resonance phenomena and non-linear pulsations, were investigated. The resonance condition was clearly not fulfilled, the calculated period ratio being approximately 0.60, where a value of 0.50 ± 0.03 is required for resonance. In the non-linear calculation, the bump appears, with the correct phase, but was found at an amplitude that is too large. Further, the light curve does not show any bump-like feature. The cause of the bump is the large spurious boost given the star's velocity field by the solution methods.The calculated periods of the stellar models are shorter than those of previous calculations, enhancing the possibility that these stars pulsate in a radial fundamental mode.     

Transrapid MagLev Update

The Transrapid MagLev had been under development in West Germany for a number of years under the sponsorship of the Ministry of Research and Technology. Following a number of experimental and demonstration vehicles, two prototype 250MPH 100-passenger inter-city vehicles, TRO6, were built, along with an elaborate 20-mile test facility where revenue service can be simulated. Following a period of initial testing by the Transrapid consortium, the operation of the test facility was turned over to a consortium of the German airlines (Lufthansa), German railroad (DB) and a testing house. This consortium is evaluating the suitability of the Transrapid MagLev for revenue service under the complete range of operating conditions. At this time, approximately 200 runs have been made, for a total of 7,000 miles at speeds up to 220MPH (the maximum achievable until the completion of the southern loop.)