“蚌式”进气道附面层扫除特性风洞试验

以某低、高速风洞为平台,设计搭建了“蚌式”进气道附面层扫除特性测量试验系统,进行了不同流量系数和来流马赫数下进气道鼓包表面附面层扫除特性的风洞试验,通过对试验数据的整理、计算和对比分析同型号的飞行试验结果,研究了“蚌式”进气道鼓包表面附面层扫除特性。研究结果表明:在相同的来流马赫数下,随着流量系数的增大,鼓包表面附面层的扫除能力逐渐减弱;在亚声速工况的绝大多数流量范围内,鼓包表面压力系数沿鼓包中心线对称分布、压力梯度变化明显,且在不同截面沿主流方向具有增大的特征,鼓包构型对附面层扫除效果较强;超声速工况下具有明显附面层扫除能力的流量范围明显小于亚声速工况,进气道唇口形成的弓形激波是影响鼓包表面不同位置压力梯度变化的主要因素,进而决定着附面层扫除特性。在接近来流马赫数18及以上飞行工况下,附面层的扫除能力减弱,附面层分离加强,进而会造成较大的进气压力损失和畸变。     

起落架轮轴偏角对轮毂结构强度影响分析

在飞机结构设计图纸上各类零部件都以静态刚体的形式表达,起落架机轮轮轴通常设计成与地面水平的形式,在地面载荷计算与结构强度分析时也通常以图纸为准进行计算分析,但在真实的地面使用物理场景中机体结构和起落架都会在受载后产生变形,轮轴轴线将与地面产生一个偏角,或者由于制造偏差和装配偏差等原因也会产生偏角,这些因结构柔性或者制造偏差原因造成的偏角对轮轴结构强度分析过程中准确性的影响有多大,在飞机设计精确化发展趋势的今天有较大的意义。本文基于有限元方法研究了典型地面载荷工况下,通过分析相同载荷状态、不同偏角状态下,某型民用飞机主起落架轮轴轮毂结构强度的变化情况,判断计算分析中是否应考虑轮轴偏角,为后续民机相关的结构强度设计提供参考。     

Attitude control system of the first Russian nanosatellite <Emphasis Type="Italic">TNS-0 no. 1</Emphasis>

The results of designing the attitude control system of the first Russian nanosatellite TNS-0 no. 1 providing orientation of its longitudinal axis along the local geomagnetic field induction vector are presented. The system consists of a permanent magnet and two sets of hysteresis rods. The magnetic and geometric parameters of the magnet and rods are calculated. The influence of the permanent magnet field on the hysteresis rods and mutual influence of the rods in the case of compact satellite packaging are analyzed. Examples of calculations of transient processes and steady-state angular satellite motion are presented.     

Method of designing a neural controller for the automatic lateral control of unmanned aerial vehicles

The paper discusses a method of designing the neural controller for two-channel control of a technical object by an example of the roll and yaw control depending on deviations, velocities and accelerations of their variation.     

一种型号专用电源转换器快速检定系统的研制

阐述了依据Q/W 892A-2007《电源转换器检定规程》研制的型号专用电源转换器快速检定系统。通过研制专用拔出力检定装置和多功能智能转换开关,实现由PC机通过系统软件自动控制测试仪器进行检定以及检定结果的处理,并自动生成原始记录和证书报告。系统具有自动、智能等优点,能够实现电源转换器的快速检定。经应用,降低了劳动强度,节省了时间,提高了检定效率。     

LabWindows/CVI环境下调用Word文档的实现方法

目的介绍一种在Labwindows/CVI环境下调用Word的实现方法;方法结合具体的实例,实现对Word文档的调用;结果该方法可以按照规定的格式自动生成Word文档;结论提高了软件的效率和自动化程度。     

Analysis of an arbitrarily loaded shell of revolution based on the finite element method in a mixed formulation

The volume finite element in the form of hexahedron with nodal unknowns as components of the displacement vector and stress tensor has been developed to analyze the shells of revolution. The displacement vector components for the inner point of the finite element and the components of its stress tensor are expressed through the nodal unknowns using the method of vector and tensor fields interpolation by the trilinear shape functions; that provides taking into account the finite element displacement as a whole solid. The variational principle in a mixed formulation is applied to form the matrix of hexahedron deformation. The efficiency of the proposed method for approximating the values being sought as vector and tensor fields in comparison with the traditional method for approximating the values being sought as scalar fields is confirmed by a numerical example.     

某型教练机起落架信号电路改进设计

针对某型教练机存外场使用时出现起落架未放到位，而飞行员却没能及时发现的问题，本文对飞机起落架信号电路进行了分析，并提出了相应的改进措施。     

Approximate technique of tip vortex account in calculating a helicopter main rotor

We present the materials, which substantiate the application of a rather simple approximate method of accounting for disturbances of the airflow around the helicopter main rotor blades; in this case, the disturbances are caused by vortices that come down from the blade ends. It is shown that these disturbances influence significantly the varying blade loads.     

Investigation of the motion of (99942) apophis asteroid using the SKIF cyberia multiprocessor computing system

We present the results of investigation of the dynamics of (99942) Apophis asteroid, which will undergo a very close encounter with the Earth on April 13, 2029. The region of possible motions of the asteroid is considered on the time interval (2004, 2040). In addition, it is shown that an increase of the observational interval (2004, 2006) until 2008 allowed us to reduce significantly the area of possible motions. All investigations were performed by numerical methods with the help of algorithms and software developed by us in the environment of parallel programming using the SKIF Cyberia multiprocessor computer of the Tomsk State University.