一般硬化材料弹塑性旋转盘的变分解法

首先在小弹塑性范围内用应变的奇次四项式相当精确地拟合一般硬化材料的拉伸曲线;再在体积不变条件下用弹性位移场的已知模态和一待定幅值构成弹塑性位移场;最后用势能原理确定该幅值而得到封闭解。     

寒冷地区农村建筑围护结构热工性能优化及经济性研究

农村建筑热工性能较差,采暖季能耗居高不下。本文通过Dest软件建立模型,对寒冷地区农村建筑不同围护结构下能耗情况进行模拟,并建立P1-P2经济分析模型,以全生命周期费用最小或者净现值最大确定合理的外墙保温层厚度及窗户类型。     

Genetic differentiation induced by spaceflight treatment of Cistanche deserticola and identification of inter-simple sequence repeat markers associated with its medicinal constituent contents

The dried, fleshy stems of Cistanche deserticola (Orobanchaceae) are popular tonics in Traditional Chinese Medicine (TCM) to treat the inability of kidney in expelling extra fluid in the body, causing fluid retention, and reform reproductive system. However, the wild plants of C. deserticola have become endangered due to habitat downsizing and over-harvesting for its medicinal usages. The present research was carried out for the following purposes: (1) promoting the space-breeding research; (2) providing molecular evidence for agricultural selective breeding; and (3) protecting this endangered herbal medicine and conserving its genetic resources.     

Visualization and PIV study of wing-tip vortices for three different tip configurations

The planform, profile, and cross-sectional views of the wing-tip region of a half-wing model with an aspect ratio of 3.2 and three different wing configurations, namely, square-cut, simple fairing, and Whitcomb?s full winglet wing-tip, were visualized at various angles of attack using smoke-wire visualization technique. Visualization pictures clearly show that the wing-tip vortices at different angles of attack and wing-tip configurations had distinct formation and structure characteristics. A comparison of simple fairing and Whitcomb?s winglet configurations shows that the wing-tip vortices of the Whitcomb?s winglet configuration were reduced in strength and displaced outboard and upward, at least in the near-wake region. This resulted in an increased lift-to-drag ratio for the Whitcomb?s winglet configuration. The changes in the wing-tip vortex characteristics and the improved aerodynamic performance of the winglet were confirmed by Particle Image Velocimetry (PIV) measurements of the cross-flow velocity of the wing-tip trailing regions and the force measurement of the model.     

某飞行器防热材料力学性能测试与分析

按照飞行过程中的防热层温度变化情况,对某飞行器防热材料进行了不同温度下的弯曲性能测试。测试结果表明,该防热材料在升温和降温过程中,在相同温度点具有明显不同的力学性能。根据材料性能测试结果,用有限元方法进行模拟,进一步得出该材料的弯曲模量与拉伸模量的关系,为防热结构进行有限元分析提供材料性能数据支撑。     

金属弹簧管性能影响因素的仿真分析

为了研究高温密封组件金属弹簧性能,本文通过对波音公司编网状弹簧管结构和Streck心脏支架结构的研究,建立了编织弹簧的几何拓扑构型和数学模型,推导了弹簧直径计算公式。采用AUTODESK3D-MAX构建了编织弹簧的仿真模型,用ANSYS仿真软件分别从编织丝直径、编织密度以及编织方法 3方面探究不同测试对弹簧性能的影响。结果表明,增加弹簧丝直径、降低弹簧管轴向方向的编织密度、提高圆周方向的编织密度、向外的弹簧管编织方式可有效提高弹簧管的回弹性能。     

MTPS蜂窝夹芯结构传热性能及热应力分析

对于金属防热结构的蜂窝夹芯结构的稳态情况,基于材料的全灰体假设,同时考虑热传导和热辐射两种传热形式对温度场的耦合作用,利用热流量守恒建立了蜂窝芯层温度场的非线性积分方程。离散化后利用数值方法得到方程组的数值解。对于美国兰利研究中心的实验结果,与本文方法的对比计算结果基本吻合。进一步,利用计算结果讨论了给定面板温度边界情况下,下面板、柱体层的灰度、蜂窝结构长径比对夹芯温度场的影响。并根据温度场和近似的应力分析模型,用半解析结果讨论了稳态情况下蜂窝芯层上的热应力。