高校校报学生记者队伍建设探析

办好高校校报离不开一支高素质的学生记者队伍,这既是办好校报的重要条件,也是高校人才培养的需要。在阐述学生记者队伍建设的内涵和现实意义的基础上,从学生记者队伍的选拔、培养、管理等方面,论述了加强学生记者队伍建设的主要举措。     

花状SnS2微球用作高效锂空气电池催化剂的研究

因超高的理论能量密度,锂空气电池在航空航天、电动汽车等领域展示了广阔的应用前景,但其目前的性能仍与实际使用需求有较大的差距。本文旨在开发具有双功能催化作用的正极催化剂以提升锂空气电池的性能。采用简易的一步溶剂热法成功制备了花状结构的SnS_2微球,并首次探究了其作为可充锂空气电池正极催化剂的应用前景。结果表明:所制备的花状SnS_2微球对锂空气电池的正极过程具有优异的催化性能,大大改善了以其为催化剂的锂空气电池的综合性能,证明SnS_2是一种有潜力的、值得深入研究的锂空气电池用催化剂材料。     

虚拟量仪——一种新的量仪设计思想

从虚拟仪器和虚拟现实技术出发，提出了虚拟量仪这一新概念，并对虚拟量仪的定义、特点、优点、结构形式以及虚拟量仪设计的基本思想、基本内容和关键技术作了分析。     

532nm激光对TDI线阵推扫相机干扰效果评估

拟探讨激光对TDI(时间延迟积分)线阵推扫相机的干扰能力评估问题。实验中利用电动转台建立了激光干扰TDI线阵推扫相机的实验平台。评估理论方法上基于光学传递函数、成像对比度建立了一种干扰评估准则。获得了不同入瞳功率条件下的干扰图像。建立了激光干扰能力与图像对比度的关系,即在典型目标空间调制度对比度下降到0.01之后图像无法被人眼有效识别的判据条件。对获得的实验干扰图像进行分析表明,激光还能够对饱和区域外的图像造成有效干扰。在入瞳激光功率小于50mW时,532nm激光对Dalsa 4k、8kTDI线阵推扫相机的实验评估表明,干扰范围约为饱和区域的4倍。开展了532nm连续激光对TDI线阵推扫相机的干扰效果实验,建立了一种基于光学传递函数、成像对比度的干扰评估方法,并对实验结果进行了干扰效果评估。研究结果对图像评估以及激光防护等应用具有一定参考价值。     

Electrochemical micromachining of microgroove arrays on phosphor bronze surface for improving the tribological performance

A high friction coefficient and a low wear rate of contacted surfaces are essential elements to friction pairs between the stator and the rotor in ultrasonic motors. It has been shown that surface textures have a significant effect on improving the tribological performance of friction pairs.In this paper, microgroove arrays are introduced to the stator surface for improving the tribological performance of friction pairs between the stator and the rotor in ultrasonic motors. Microgrooves were fabricated on a phosphor bronze surface by through-mask electrochemical micromachining(TMEMM). Parameters, namely, the electrolyte inlet pressure, applied voltage, pulse duty cycle,and frequency, were varied to investigate their influences on the dimensions and morphology of the microgrooves. Results showed that the width and depth of the microgrooves were strongly affected by the applied voltage and frequency, while the morphology of the microgrooves was dependent on the electrolyte inlet pressure and the pulse duty cycle. Compared with a smooth surface, the friction coefficient increased from 0.245 to 0.334 and less abrasion was obtained when a surface was textured with microgrooves of which the width and depth were 185.6 and 57.6 lm,respectively. Microgroove arrays might play an important role in enhancing the performance of ultrasonic motors.     

Study on Multi-Rotary Joints Space Power Satellite Concept

The Space Power Satellite(SPS) would be a huge spacecraft capturing the power of solar radiation in space and to supply electric power to the electric grid on the ground. The SPS concept was proposed by Dr. Peter Glaser in 1968. SPS have been studied now for exactly fifty years by many scientists in various countries. It has been regarded as one of the most promising energy projects of the future and has been attracting more attention in recent years. More and more Chinese scholars and experts are paying attention to the development of SPS. Due to the huge size, immense mass and high power of such a satellite system, there are many technical difficulties which exist to realize SPS. In this paper, recent SPS research and development activities are reviewed first. Various SPS concepts are analyzed and compared. The primary scheme of the Multi-Rotary joint SPS(MR-SPS) is described. The main feature is that the huge solar array comprising many separate small solar sub-arrays and each solar sub-array has two middle power rotary joints. So, the most challenging technology, the high-power rotary joint, is simplified by using many middlepower rotary joints hence the possibility of a single-point failure of a single rotary joint is avoided. This enables easy assembly of the modular solar arrays. Finally some key technologies of MR-SPS are analyzed.     

网站重构方法研究

针对目前网站建设维护方面存在的问题,通过对重构方法的介绍及实现步骤的说明,提出了合理进行网站重构的几种方法,给出在网站重构过程中的一些建议.     

国际企业年金制度的发展趋势及其对我国的启示

国际企业年金制度正在从现收现付制向基金积累制转型，从单一的国家养老金向基本养老金、企业年金和个人养老储蓄金相结合的三支柱模式转型，从政府集中统一管理模式向企业年金投资模式转型，企业年金制度的受益形式也正在从待遇确定型向缴费确定型转型。我国在建立企业年金制度时，应重点考虑以下几个方面：（1）应允许缴费确定型模式和待遇确定型模式的共存和竞争，鼓励实行各种混合型模式计划，增强制度的适应性；（2）应对企业年金给予有条件免税，在制定企业年金税制时应深入考虑缴费环节、投资环节和领取环节；（3）政府应用法律手段对企业年金进行宏观调控和规范，最大限度控制企业年金制度的运行风险；（4）企业年金应坚持以信托型为基本模式，吸取公司型的优点，包容基金型和契约型，走结合型创新的道路。     

温度畸变发生器研制

介绍了航空发动机温度畸变试验装置的工作原理、设计技术要求、主要设备以及用涡喷和涡扇发动机调试和对比试验的结果。调试结果证明：该装置具有高的工作可靠性、可控性和稳定性,高温区平均温升值可达10－400K,绝对温升率可达300－5500K/s,可用于空气流量为30－150kg/s各类燃气涡轮发动机的温度畸变试验。     

船舶齿轮箱振动测试分析及优化研究

齿轮箱是船舶动力传动系统的主要振源之一，为了研究船舶齿轮箱振动性能及优化措施，进而实现船舶的低噪声化，以本单位自主研发的船用齿轮箱为例，通过台架试验和振动频谱分析结合的方法分析齿轮箱振动的主要影响因素，对振动性能关键影响因素进行优化改进。本文结合振动频谱分析结果对齿轮箱从齿轮修形设计和液压供油系统改进两个方面进行了优化，并对采取优化措施后的齿轮箱进行振动试验验证和振动频谱分析。结果表明：齿轮修形和液压供油系统改进两项优化措施可以切实有效的改善齿轮箱的振动性能。在文中的齿轮箱案例中，齿轮修形后齿轮啮合频率处振动峰值下降40.2%，总振级下降1.85dB，进一步采取液压供油系统改进措施后，齿轮箱总振级下降9.99dB。齿轮修形和液压供油系统改进对船用齿轮箱振动性能提升具有工程应用价值。