Stochastic Dynamic System Suboptimal Control with Uncertain Parameters

The control of a linear system with random coefficients is studied here. The cost function is of a quadratic form and the random coefficients are assumed to be partially observable by the controller. By means of the stochastic Bellman equation, the optimal control of stochastic dynamic models with partially observable coefficients is derived. The optimal control is shown to be a linear function of the observable states and a nonlinear function of random parameters. The theory is applied to an optimal control design of an aircraft landing in wind gust.     

Parallel resonant converter with LLC-type commutation

It is shown that by using a proper transformation of state variables, the third-order system of the parallel resonant converter (PRC) with LLC-type commutation can be analyzed by means of a two-dimensional state-plane diagram. A set of characteristic curves which can be used for the converter design is derived from the analysis. It is shown from these curves that the converter possesses more desirable features than the conventional PRC     

Investigations of Stability & Dynamic Performances of a Current-Injected Regulator

The stability and dynamic performances of a buck/boost regulator employing a current-injected control are examined. Small-signal models for the power state, the multiloop error processor, and the duty-cycle pulse modulator are developed. The error-processor model which incorporates the current-injected loop, the dc loop, and the compensation network permits evaluation of the effects of each individual control loop and their combined efforts toward shaping the performance characteristics of the closed-loop system. Comparisons are made between this modeling approach and earlier approaches. Some important yet subtle dissimilarities are discussed. This model predicts the constant-frequency 50-percent duty-cycle instability which is inherent to the current-injected control.     

机翼结构拓扑优化的一种新渐进结构优化方法

基本ESO方法存在着删除准则单一,应用范围局限于简单结构的缺点,本文分析了其用于类似飞机机翼这种复杂结构拓扑优化设计中的不足之处,并进行针对性地改进,提出了一种新的删除准则,构成了一种新的渐进结构优化方法。算例表明,该方法适合于复杂机翼结构的拓扑优化问题,拓展了基本渐进结构优化方法的功能,有着很好的推广应用价值。     

环境专业教学体系结构改革探索——以就业市场需求为导向

通过对西安航专2006与2007年环境监测与治理技术专业毕业生就业情况的对比分析，认为目前环境类专业的就业形势发生良性转变，需求范围增加，同时就业单位对毕业生的专业技术能力、技术管理能力等也提出了更高的要求。据此，我们从专业发展方向、课程体系结构以及实验实训三个方面进行建设与调整来满足就业单位的需求。     

航空装备发展趋势与展望

简述了在高技术的推动下和信息化战争的牵引下，世界主要国家军队的机械化武器装备体系正在快速向信息时代的信息化武器装备体系发展。新军事变革对我国航空装备发展带来严峻挑战以及我国航空装备发展思路。     

根据遗传算法的拉深模试冲缺陷智能诊断

总结了拉深模试冲时的缺陷及原因，建立原因表，应用遗传算法技术对拉深模试冲时的缺陷进行智能诊断，探讨了提高拉深模试冲时的缺陷诊断准确率的优化方法，描述了遗传算法的诊断过程。     

热处理和冷变形对Ti—Ni合金非线性超弹性的影响

本文利用拉伸试验系统地研究了冷变形量、热处理工艺对Ｔｉ－４９．８％（原子分数）Ｎｉ合金非线性超弹性的影响。研究表明，不同冷变形量丝材经７２３Ｋ，０．５ｈ退火处理后，冷变形量较大的丝材（大于２０％）经一定次数的应力－应变循环处理后，可获得完全的非线性超弹性，而冷变形量较小的丝材，即使经过多次应力－应变循环处理也难以获得完全的非线性超弹性。经同一温度退火处理的不同冷变形量丝材，冷变形量越大，获得完全非     

大曲率弯道和叶栅内的湍流数值模拟

本文在贴体曲线坐标系下应用非交错网格技术，发展了适于求解复杂流动的压力修正算法，采用速度的协变物理分量为动量方程的求解变量，推导得出一个适于任何曲线坐标系下控制单元体界面流通量的插值模式，可以有效地抑制不合理的波动压力场，计算表明，算法稳定收敛，计算值与试验值吻合良好，同时能预示通道内复杂的流动现象。     

少烟推进剂中新型复合多功能添加剂研究

利用多种实验手段，考察了四种新型复合多功能添加剂对ＡＰ／ＲＤＸ／ＡＬ／ＨＴＰＢ少烟复合推进剂力学性能，燃烧性能，热分解性能和工艺性能的影响。实验及分析证实，Ｃ－２和Ｃ－１两种复合多功能添加剂能显著改善少烟复合推进剂的力学性能，尤其是低温力学性能，同时还能提高推进剂燃速，是两种良好的多功能添加剂。