火星探测用降落伞研制试验简介

文章主要介绍了美国火星探测用降落伞研制过程以及在研制过程中的一些主要试验，并同时指出了试验中的一些特点。     

ILD智能交通流量测试仪

介绍一种交通流量测试仪，它具有高灵敏度、高信噪比、传输距离远，可以准确地测量机动车、自行车流量，且成本低。由于该仪器设置了驱动变送器，采用了一种新的传输结构，引入了微机技术，模式识别等技术，从而研制出性能稳定、操作方便、实用性强且具有国际先进水平的道路交通流量测试装置。     

CBERS-1卫星CCD相机零级图像处理研究

CCD相机是CBERS - 1卫星上的主要有效载荷之一。利用其接收的可见光和近红外谱段的图像 ,可以在国民经济的各个生产部门 ,诸如国土资源调查、农业、林业、地矿、水利、环境、生态等方面得到广泛应用。但是由于探元和光学系统成像的物理机制和各种干扰等因素影响 ,地面接收到的数据必须经过处理才能应用。文章介绍的内容就是将这种图像数据经图像预处理 ,得到零级图像 ;经过相应的辐射校正 ,得到一级图像 ;经过几何校正 ,得到二级图像产品 ,提供给其它部门加以应用     

航天光学采样成像系统MTF的优化设计与MTFC

简要介绍了成像链、成像系统和遥感系统的概念；对像质和像质差异的表征和度量、成像系统性能的表征等予以说明；重点探讨航天光学采样成像系统MTF的优化设计与MTFC问题，并给出讨论结果。     

GPS空间分集接收机

为解决传统单天线GPS接收机在载体旋转情况下不能连续跟踪卫星连续定位和速度偏差较大的问题,提出一种GPS空间分集接收机设计方案。该接收机采用空间分集算法和消旋解算方法,能稳定连续地跟踪GPS卫星信号,并准确地求解出载体的平动速度。     

封头补强技术研究

研究了碳纤维／环氧复合材料φ１５０ｍｍ和φ４８０ｍｍ压力容器封头的局部补强方法和工艺，试验结果表明：φ４８０ｍｍ压力容器经在大金属件边缘补强后改变了水压爆破时金属件飞出的现象，纤维强度得以充分发挥而使筒身段纵环向同时破坏；φ１５０ｍｍ压力容器的应力平衡系数可由０．７５提高到０．８５以上，筒身段纵向纤维发挥强度由２０９０ＭＰａ提高到２３３６ＭＰａ，提高约１１．８％。由此可见，壳体铺层设计与封头补强巧妙地结合是壳体优化设计的重要方法，是充分发挥纵向纤维强度的有效措施。     

The cost benefits of the Spacelab system to scientific investigations and space applications

In the past, one of the major problems in performing scientific investigations in space has been the high cost of developing, integrating, and transporting scientific experiments into space. The limited resources of unmanned spacecraft, coupled with the requirements for completely automated operations, was another factor contributing to the high costs of scientific research in space. In previous space missions after developing, integrating and transporting costly experiments into space and obtaining successful data, the experiment facility and spacecraft have been lost forever, because they could not be returned to earth. The objective of this paper is to present how the utilization of the Spacelab System will result in cost benefits to the scientific community, and significantly reduce the cost of space operations from previous space programs.The following approach was used to quantify the cost benefits of using the Spacelab System to greatly reduce the operational costs of scientific research in space. An analysis was made of the series of activities required to combine individual scientific experiments into an integrated payload that is compatible with the Space Transportation System (STS). These activities, including Shuttle and Spacelab integration, communications and data processing, launch support requirements, and flight operations were analyzed to indicate how this new space system, when compared with previous space systems, will reduce the cost of space research. It will be shown that utilization of the Spacelab modular design, standard payload interfaces, optional Mission Dependent Equipment (MDE), and standard services, such as the Experiment Computer Operating System (ECOS), allow the user many more services than previous programs, at significantly lower costs. In addition, the missions will also be analyzed to relate their cost benefit contributions to space scientific research.The analytical tools that are being developed at MSFC in the form of computer programs that can rapidly analyze experiment to Spacelab interfaces will be discussed to show how these tools allow the Spacelab integrator to economically establish the payload compatibility of a Spacelab mission.The information used in this paper has been assimilated from the actual experience gained in integrating over 50 highly complex, scientific experiments that will fly on the Spacelab first and second missions. In addition, this paper described the work being done at the Marshall Space Flight Center (MSFC) to define the analytical integration tools and techniques required to economically and efficiently integrate a wide variety of Spacelab payloads and missions. The conclusions reached in this study are based on the actual experience gained at MSFC in its roles of Spacelab integration and mission managers for the first three Spacelab missions. The results of this paper will clearly show that the cost benefits of the Spacelab system will greatly reduce the costs and increase the opportunities for scientific investigation from space.     

践行"技术标准战略"中的相关问题管见

给出了践行“技术标准战略”中的两种观点,用案例解析了卓越质量与先进标准之关系,介绍了国内外相关“标准战”的情况,并分析了企业实施标准化战略的作用。     

具有容错性的自重构机器人变形原理

自重构机器人通过自主变形来适应环境和任务的需要，它具有低成本、多样性、自修理和容错性等特点。本文针对系统的容错性目标，深入研究了具有容错性的自重构机器人的自组织变形方法。首先建立能够表达失效模块信息的系统结构描述模型；然后建立自重构机器人的模块运动规则；提出可以实现容错性的自组织变形算法。在系统出现失效模块的情况下，机器人依然能够有效完成指定的任务。本文以平面正方形晶格机器人翻越障碍物为例对变形原理和算法进行了验证和仿真。     

UG结构分析在自动窗研发中的应用

介绍了UG结构分析在自动窗型材设计中的应用,对用UG软件分析窗体类对象时建立模型、载荷添加等问题提出了解决方案。