CAFUC视阈下对英语专业教学改革的微观研究

英语专业是中国民航飞行学院(CAFUC)唯一的文科类专业。英语专业的教学改革是一个长期持续的课题。从CAFUC视阈角度对英语专业教学改革做出微观研究,分析了CAFUC英语专业的优劣势并预测了今后的教学思路。     

风洞模型-支撑系统涡激振动测量与分析

以0.55m×0.4m低湍流航空声学风洞某模型及其支撑系统为研究对象,采用基于加速度传感器直接测量支撑系统和热线间接测量模型尾流相结合的方法,测量并分析了风洞模型-支撑系统的涡激振动模态,给出了测量方案和数据处理方法。采用基于加速度传感器的功率谱分析方法,获得了模型-支撑系统的三阶振动频率分别为31.1、120.9和221.4Hz;采用基于加速度传感器的频域滤波和频域积分方法,提高了有效信号的信噪比,获得了模型-支撑系统振动的振型和振动节点位置;采用热线测量模型尾流分离涡脱落频率的方法,获得了模型一阶和二阶振动的尾流涡激频率分别为31.1和124.1 Hz,并从测量尾流速度脉动量获得了模型振幅变化和抖振边界信息。实验结果表明,采用热线测量模型尾流从而分析模型振动的方法,有利于小尺度的模型振动测量,而且相对于加速度传感器装于模型表面的直接测量方法而言,对试验模型的绕流流场干扰较小,为测量风洞试验模型的涡激振动模态提供了一种方法。     

空地协同交通状态感知与应急指挥系统构建

交通事件发生的时间和地点具有不可预测性,不及时处理将会严重干扰交通流的正常运行.构建了基于空基的交通状态感知和应急指挥系统,并提出了系统建设的原则;研究了系统的体系结构,将整个系统分为信息采集层、网络传输层、安全管理层、应急指挥层4个层次.信息采集层主要通过空基、地基等多种手段获取交通信息;网络传输层处理各类网络通信数据包的存储和转发;安全管理层确保系统数据和传输的安全;应急指挥层实现统一接警、处警决策与协调指挥.实现了基于空基信息的道路轮廓特征和电子地图矢量道路的提取,以及航拍图像与电子地图的匹配,为辨识突发事件情况下的路段排队长度和车辆密度奠定了基础.     

喷丸对18％Ni型超高强度钢低周疲劳性能影响

对C250型18%Ni超高强度钢（C250钢）进行铸钢丸一次喷丸（单喷）和铸钢丸+玻璃丸二次喷丸（双喷）,研究喷丸前后的表面形貌、显微组织和低周疲劳性能的变化.结果表明,单喷后C250钢低周疲劳寿命提高了接近2.5倍,而双喷后试样疲劳寿命提高3倍.喷丸表面的亚晶粒细化是提高低周疲劳性能的主要因素,二次喷丸带来的平滑化效果进一步提高了低周疲劳性能.平滑化效果减小了表面应力集中程度,使经过双喷后试样疲劳断口为单源疲劳断口,而未喷丸试样和单喷试样的低周疲劳断口呈现多源疲劳状态.     

一种改进的多点融合非均匀校正技术

针对空间宽幅相机在进行非均匀性校正过程中相机镜头与积分球输出口的相对位置发生变换后非均匀性校正精度下降的原因进行了分析,提出了一种改进的融合多点位置的非均匀校正新方法,即为了消除积分球的角均匀性和面均匀性的不足,采用获取多个位置的大量定标图像,融合求取平均值的方法得到校正系数来削弱这种影响,并进行试验验证分析。结果表明,多点融合的校正方法在积分球输出口光强不均匀、又无法固定相机与积分球相对位置的前提下,减少了积分球光强的不均匀性对系数可靠性的影响,相对辐射定标的非均匀校正精度得到大幅提高。     

Satellite-observed biological variability in the equatorial Pacific during the 2009–2011 ENSO cycle

The event of 2009–2011 El Niño Southern Oscillation (ENSO) provides an opportunity to gain insight into the biological variability of the equatorial Pacific Ocean for an entire ENSO cycle with satellite and in situ observations. Even though El Niño and La Niña in general led to respectively weakened and enhanced chlorophyll-a concentration and net primary production (NPP) along the equatorial Pacific Ocean during the 2009–2011 ENSO cycle, biological responses were highly disparate along the equator and attributed to different driving mechanisms. In the eastern equatorial Pacific east of 150°E, the El Niño-La Niña biological change was in general small except for the transition period even though sea surface temperature (SST) showed over ∼5 °C drop from El Niño to La Niña. In the central-eastern (170°W–140°W) equatorial Pacific, moderate change of biological activity is attributed to the changes of thermocline driven by the eastward propagating equatorial Kelvin waves and changes of zonal currents and undercurrents. Highest biological response in this ENSO cycle was located in the central (170°E–170°W) and central-western (150°E–170°E) equatorial Pacific with quadruple chlorophyll-a concentration and over ∼400 mg C m⁻² d⁻¹ increase of NPP from El Niño in 2009 to La Niña in 2010. However, spatial pattern of ENSO biological variability as represented with NPP is not exactly the same as chlorophyll-a variability. Wind-driving mixing of nutrients and eastward advection of the oligotrophic warm pool waters are attributed to this significant biological variability in this region.     

The impact of orbital errors on the estimation of satellite clock errors and PPP

Precise satellite orbit and clocks are essential for providing high accuracy real-time PPP (Precise Point Positioning) service. However, by treating the predicted orbits as fixed, the orbital errors may be partially assimilated by the estimated satellite clock and hence impact the positioning solutions. This paper presents the impact analysis of errors in radial and tangential orbital components on the estimation of satellite clocks and PPP through theoretical study and experimental evaluation. The relationship between the compensation of the orbital errors by the satellite clocks and the satellite-station geometry is discussed in details. Based on the satellite clocks estimated with regional station networks of different sizes (∼100, ∼300, ∼500 and ∼700 km in radius), results indicated that the orbital errors compensated by the satellite clock estimates reduce as the size of the network increases. An interesting regional PPP mode based on the broadcast ephemeris and the corresponding estimated satellite clocks is proposed and evaluated through the numerical study. The impact of orbital errors in the broadcast ephemeris has shown to be negligible for PPP users in a regional network of a radius of ∼300 km, with positioning RMS of about 1.4, 1.4 and 3.7 cm for east, north and up component in the post-mission kinematic mode, comparable with 1.3, 1.3 and 3.6 cm using the precise orbits and the corresponding estimated clocks. Compared with the DGPS and RTK positioning, only the estimated satellite clocks are needed to be disseminated to PPP users for this approach. It can significantly alleviate the communication burdens and therefore can be beneficial to the real time applications.     

基于三维最小二乘方法的空间直线度误差评定

空间直线度误差是评定机械产品精度的一项重要指标,实际工程中对空间直线度误差评定算法的精度要求越来越高.为了准确评定空间直线度误差,参照国家标准(GB/T 11336—2004),采用三维最小二乘方法建立了空间直线拟合的数学模型,并给出了该数学模型的精确解.基于最小二乘拟合中线,采用空间投影、坐标变换和格点法求得最小二乘中线包容圆柱面直径.采用数值算例验证了新方法的有效性.提出的空间直线度误差评定方法精度高、鲁棒性好且易于编程实现.     

150kV/30kW逆变式电子束焊接高压电源设计

针对150kV/30kW电子束焊接高压电源高电压、大功率输出的要求,低压电路采用IGBT (Insulated Gate Bipolar Transistor)逆变隔离直流电源与逆变全桥串联的主电路拓扑,高压电路由3组升压变压器与10倍压整流电路的串联结构并联组成;设计了高压采样电路、束流采样电路,以及双闭环控制电路.基于上述技术,实现了150kV/30kW高电压大功率输出.实验结果表明高压加速电源的输出线性度和束流输出线性度较好,同时高压稳定度和束流稳定度均在0.5%左右,能够满足电子束焊接的要求.     

Chaboche随动硬化模型参数确定及棘轮效应

采用遗传算法确定不同Chaboche随动硬化模型的参数,得到的3种模型中,四分量模型对棘轮的预测与试验结果符合最好.增大应力幅值或应力平均值,都会使应变峰值增大,应变累积速度加快;利用确定的四分量模型研究加载顺序对棘轮的影响.结果表明,平均应力加载顺序对棘轮预测有较大影响,加载顺序高-低的累积应变低于加载顺序低-高的累积应变,而且先加载的平均应力越大,后加载的载荷产生的累积应变越小;而应力幅值加载顺序对应变累积几乎没有影响.