固体发动机药柱粘结试件的三维应力分析

推进剂／衬层／绝热层矩形粘结试件已作为随发动机测试试件，用于监控药柱最薄弱的推进剂／衬层界面粘结质量。由于试件较厚，又材料具有粘弹特性，因此应对它进行三维粘弹性有限元分析。本文分析了推进剂／衬层界面附近的应力分布情况，并给出试件启裂点有效应力与拉伸平均应力之比的集中系数，供药柱结构完整性分析人员使用     

光纤加速度传感器

介绍开环和闭环两种光纤加速度传感器的特点、工作原理和结构简图，论述了温度对开环光纤加速度计的影响，以及解决此影响的方法，并给出了消除温度漂移误差的系统框图。     

定速拉伸的固体推进剂双轴板条的应力分析

对固体推进剂双轴板条试件进行了有限元分析，并考虑了粘弹性对应力结果的影响，分析结果表明，双轴板条试件中心域为平面应变状态，与发动机药柱中部内孔表面相似，并给出了计算杨氏模量所需的修正系数。     

刚弹性复杂系统在重力场中的定点转动

本文研究了轴对称刚－弹系统在重力场中的定点运动。首先利用模态分析方法将偏微分方程转化为常微分方程组，然后引进小参数将藕合的长周期运动和短周期运动分离。得到了这个非线性刚弹藉合系统的一次近似解，并利用它研究了刚－弹系统运动特性。     

固体火箭发动机点火过程内流场的二维预示

本文对固体火箭发动机点火过程的内场流进行了二维无粘非定常分析，计算得到了该阶段燃烧室中压强，温度和速度的分布。本文还提出了以近似预示复杂三维装药发动机内流场的有效积法。     

Energy Spectrum of Galactic 10–100 MeV Protons in Quiet Sun Periods

The dynamics of the proton energy spectrum during the solar cycle is studied. The spectra were determined by 1–100 MeV particle fluxes measured by different instruments mounted aboard the Earth's IMP-8 satellite for more than one hundred quiet-time intervals in the period between 1974 and 1991. The galactic branch of the spectra (E _p > 10 MeV) constructed for every quiet interval was fitted by a power law function, J =CE . The theory predicts that in the 1–100 MeV energy range, where the adiabatic cooling of particles is dominant, = 1, while we have derived a double-peak distribution. The main maximum has the mean value = 1.35. The mean value of the second, much weaker maximum, is = 0.95. Within the main maximum, values are distributed in accordance with the Gaussian law with a standard deviation D/ = 0.12. The substantial difference of from unity requires the elaboration of a new model of modulation processes in the inner heliosphere. The values corresponding to the second maximum show that modulation processes correspond sometimes to theoretical conceptions. It is shown that correlates weakly with parameters A and describing the solar branch of the spectrum (J(E) = AE ^–). At the same time, a more significant correlation is observed between and the solar activity index, R _z, the counting rate of the Deep River neutron monitor, and the energy value in the minimum of the energy spectrum flux, E _min.     

Production of neutrons from interactions of GCR-like particles

In order to help assess the risk to astronauts due to the long-term exposure to the natural radiation environment in space, an understanding of how the primary radiation field is changed when passing through shielding and tissue materials must be obtained. One important aspect of the change in the primary radiation field after passing through shielding materials is the production of secondary particles from the breakup of the primary. Neutrons are an important component of the secondary particle field due to their relatively high biological weighting factors, and due to their relative abundance, especially behind thick shielding scenarios. Because of the complexity of the problem, the estimation of the risk from exposure to the secondary neutron field must be handled using calculational techniques. However, those calculations will need an extensive set of neutron cross section and thicktarget neutron yield data in order to make an accurate assessment of the risk. In this paper we briefly survey the existing neutron-production data sets that are applicable to the space radiation transport problem, and we point out how neutron production from protons is different than neutron production from heavy ions. We also make comparisons of one the heavy-ion data sets with Boltzmann-Uehling-Uhlenbeck (BUU) calculations.     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

机动再入飞行器的复合制导方案研究

对机动再入飞行器弧段的复合制导方案进行了研究，首先提出了通过高低空复合制导控制再入飞行器的终端速度和弹道倾角的思路；然后分别给出了高空最优制导律和大气厚再入最优制导律；最后对此复合制导方案进行了数字仿真。仿真结果表明此方案在理论上是可行的。     

自适应控制方法的直接命中目标本体的平行接近制导律

本文在最少量测条件下采用视线角速度ｑ趋于零的指标函数和低阶等效辨识模型与快速自适应控制方法实现了战术导弹的平行接近制导律。这种最优制导律可以实现直接命中目标本体，实现一弹多用，可以用于反导弹的控制。能使制导装置简化并使其尺寸和重量减小，算法简单易于工程使用。经过大量数学和半实物仿真试验表明，上述成果可应用于实际工程当中。