Chaboche随动硬化模型参数确定及棘轮效应

采用遗传算法确定不同Chaboche随动硬化模型的参数,得到的3种模型中,四分量模型对棘轮的预测与试验结果符合最好.增大应力幅值或应力平均值,都会使应变峰值增大,应变累积速度加快;利用确定的四分量模型研究加载顺序对棘轮的影响.结果表明,平均应力加载顺序对棘轮预测有较大影响,加载顺序高-低的累积应变低于加载顺序低-高的累积应变,而且先加载的平均应力越大,后加载的载荷产生的累积应变越小;而应力幅值加载顺序对应变累积几乎没有影响.     

对毫米波末制导雷达两点源干扰效能分析研究

毫米波末制导是精确制导的重要方式之一。首先分析了对毫米波末制导雷达的电子对抗原理,在此基础上分别建立了对毫米波末制导雷达的两点源相干干扰、非相干干扰和闪烁干扰的效能分析模型,并研究了各种干扰方式的作战运用。     

美国一体化导弹防御系统研究

从美国一体化导弹防御系统的内涵入手,系统地研究了美国导弹防御系统的结构、作战指挥、试验,以及国际合作的情况,最后总结其未来发展趋势。     

弹道导弹突防中的电子防护效能研究

分析了弹道导弹突防中的电子战威胁环境。针对弹道导弹突防阶段可能遭受的电子攻击模式,提出了相应的电子防护措施,并对防护措施的可行性和有效性进行分析和讨论。提出了弹道导弹突防阶段电子防护效能的概念,建立了电子防护效能评估指标体系,在此基础上建立了一系列电子防护效能评估模型。     

Study on O2 generation and CO2 absorption capability of four co-cultured salad plants in an enclosed system

The ability to generate O₂ and absorb CO₂ of several co-cultured vegetable plants in an enclosed system was studied to provide theoretical reference for the future man-plant integrated tests. Four kinds of salad plants (Lactuca sativa L. var. Dasusheng, Lactuca sativa L. var. Youmaicai, Gynura bicolor and Cichorium endivia L.) were grown in the CELSS Integration Test Platform (CITP). The environmental factors including O₂ and CO₂ concentration were continuously monitored on-line and the plant biomass was measured at the end of the test. The changing rules of O₂ and CO₂ concentration in the system were basically understood and it was found that the O₂ generated by the plants could satisfy the respiratory needs of 1.75 persons by calculation. It was also found that the plants could absorb the CO₂ breathed out by 2 persons when the light intensity was raised to 550 mmol m⁻² s⁻¹ PPF. The results showed that the co-cultured plants hold good compatibility and excellent O₂-generating and CO₂-absorbing capability. They could also supply some fresh edible vegetable for a 2-person crew.     

Tropospheric wet refractivity tomography using multiplicative algebraic reconstruction technique

Algebraic reconstruction techniques (ART) have been successfully used to reconstruct the total electron content (TEC) of the ionosphere and in recent years be tentatively used in tropospheric wet refractivity and water vapor tomography in the ground-based GNSS technology. The previous research on ART used in tropospheric water vapor tomography focused on the convergence and relaxation parameters for various algebraic reconstruction techniques and rarely discussed the impact of Gaussian constraints and initial field on the iteration results. The existing accuracy evaluation parameters calculated from slant wet delay can only evaluate the resultant precision of the voxels penetrated by slant paths and cannot evaluate that of the voxels not penetrated by any slant path. The paper proposes two new statistical parameters Bias and RMS, calculated from wet refractivity of the total voxels, to improve the deficiencies of existing evaluation parameters and then discusses the effect of the Gaussian constraints and initial field on the convergence and tomography results in multiplicative algebraic reconstruction technique (MART) to reconstruct the 4D tropospheric wet refractivity field using simulation method.     

Intra-annual variations of the thermospheric density at 400 km altitude from 1996 to 2006

We investigate the intra-annual variations of globally averaged thermospheric density at 400 km altitude from 1996 to 2006 by using Artificial Neural Network Method (ANNM). The results indicate that thermospheric density is governed by solar activity, and the absolute error of our model is 13.67%, less than NRLMSISE-00 model. Fourier representation can catch the intra-annual variations more accurately than NRLMSISE-00 model and JB2008 model especially during 2002. We find that the Autumn maximum is slightly greater than Spring maximum during solar minimum, while the reverse is correct during solar maximum. There is a strong linear relation between solar activity and the amplitude of annual/semiannual variations, and the correlation coefficients are 0.9534 and 0.9424, respectively. Moreover, the amplitude ratio of the annual to semiannual variation is about 1.3 averaged, and changes in different years, but it has little relation with solar activity. Besides that, the amplitude of annual variation is larger than semiannual variation during 1996 and 2006 except 1998 and 2000. The relative error of NRLMSISE-00 model is 14.95%, decreasing to 12.49% after revising, and the correlation coefficients between this empirical model and its improved results and the observation are 0.8185 and 0.9210, respectively. Finally, we suggest the revised version of MSIS series of model should use the Fourier representation to express the intra-annual variations.     

Rapid design and optimization of low-thrust rendezvous/interception trajectory for asteroid deflection missions

Asteroid deflection techniques are essential in order to protect the Earth from catastrophic impacts by hazardous asteroids. Rapid design and optimization of low-thrust rendezvous/interception trajectories is considered as one of the key technologies to successfully deflect potentially hazardous asteroids. In this paper, we address a general framework for the rapid design and optimization of low-thrust rendezvous/interception trajectories for future asteroid deflection missions. The design and optimization process includes three closely associated steps. Firstly, shape-based approaches and genetic algorithm (GA) are adopted to perform preliminary design, which provides a reasonable initial guess for subsequent accurate optimization. Secondly, Radau pseudospectral method is utilized to transcribe the low-thrust trajectory optimization problem into a discrete nonlinear programming (NLP) problem. Finally, sequential quadratic programming (SQP) is used to efficiently solve the nonlinear programming problem and obtain the optimal low-thrust rendezvous/interception trajectories. The rapid design and optimization algorithms developed in this paper are validated by three simulation cases with different performance indexes and boundary constraints.     

变质量梁的自适应Newmark法

用变质量梁来模拟推进剂减少的液体火箭.先以一弹簧-变质量小球系统为例,用其求解结果与解析解进行比较.再以时不变的简支梁为算例,确定多自由度系统下与结构动特性协同的自适应Newmark方法中的参数选取.最后用时变的简支梁模型模拟贮箱质量的实际变化方式,运用与结构动特性协同的自适应Newmark方法、模态叠加法、Newmark平均加速度方法（NMA法）和Fox-Goodwin方法（NMF法）对其求解.比较结果证明自适应Newmark算法对于时变系统的适用性,尤其具有高精度特性.      

3PRS/UPS冗余驱动并联机器人刚度特性分布

设计提出了一种采用冗余驱动的3PRS/UPS三自由度并联机器人,并建立分析其机构模型.基于螺旋理论,对并联机器人进行运动学分析,通过分别针对机构的驱动和约束建立了雅可比矩阵,最后整合建立了包含冗余驱动在内的全雅可比矩阵.利用虚功原理,结合并联机器人驱动副和约束副的柔度影响,推导得出了机构全刚度矩阵.同时,分析了机构在给定静载荷条件下的变形情况,总结出机构的空间变形分布规律.使用刚度矩阵的最小、最大特征值和运动刚度指标（KSI,Kinematic Stiffness Index）为机构刚度评价指标,对比和分析了引入冗余驱动前后对并联机器人刚度特性分布的影响,得出冗余驱动支链的引入可提高并联机器人特定方向的刚度和改善刚度分布的结论,为冗余驱动并联机器人优化设计和开发应用奠定基础.