用于高压动态校准的快开阀装置

介绍一种高压快开阀装置。它可产生３７０ＭＰａ上升时间小于２０μｓ的阶跃压力，用于对高压传感器进行动态校准。     

GPS based onboard and onground orbit operations for small satellites

In extension to common applications such as groundtrack displays and antenna steering, the SGP4 orbit model is proposed for operational orbit determination in small satellite missions. SGP4 is an analytical orbit model for Low-Earth orbiting satellites that is widely used for the propagation of NORAD twoline elements. Twoline elements may hence be generated completely independent of NORAD. Their use as exclusive source of orbital information simplifies the operations concept and reduces mission costs through the extensive use of existing low-cost mission support software. Due to small computer resource requirements of 8–10kByte, the SGP4 model may also be applied for onboard orbit computations making use of e.g. a 80186 processor, thus ensuring full compatibility of ground-based and onboard operations. The proposed approach is particularly suited in combination with a space-borne GPS receiver, were the C/A-code navigation solutions are treated as measurements that are adjusted in a least-squares sense using the SGP4 model. As consequence, inherent drawbacks of the pure navigation solutions such as data gaps and scatter as well as limited velocity accuracy are avoided, while the operational navigation activities are kept at a minimum. The feasibility of the concept is illustrated based on real GPS navigation data from the TOPEX/Poseidon and the MIR space station with an inherent data quality of 50–100 m. It is shown that 3 hours of data within a 4 day period are sufficient to keep the position error within 4 km, that is considered sufficient for most applications.     

气动力星座保持的闭环控制研究

本文研究了利用气动力进行星座保持的闭环控制问题。提出了一种改进的半全局指数收敛闭环控制律，对于指定的任意大的有界域，利用不变集定理论上证明了该控制律的稳定性和抗干扰性，又提出了双ε法以提高响应速度。     

概率具有普遍意义

在事物必然的性质、方向和由此决定的活动范围之外,它发生、发展的每一具体变化都是偶然的.为了抓住偶然,就要求助于概率,概率已经成为我们的重要工具.     

砂轮不等分间隙槽的切割方法

在生产实践中总结出一种提高难加工材料磨削效率的方法——将砂轮修成不等分的间隙槽。介绍了将砂轮修成不等分间隙槽的制作过程,以及在生产应用中的使用效果。     

钣金制件表面的相贯线求作方法

本文提出钣金制件表面相贯线求作的新方法。     

图样的知识目标分类与例证性分析

根据教育目标分类学的观点分解课程教学目标，再分别对分解的目标进行例证性分析，能更客观地验证教育目标的实效性和教育过程的可行性。本文通过对图样的知识目标分类与例证性分析，为工程图学教育目标检测做一尝试。     

三轴稳定遥感卫星姿控系统故障情况下的系统重构

论述三轴对地稳定遥感卫星姿控系统中部分轮子或部分陀螺故障情况下的姿控系统重构。文中论述了只在俯仰通道有一偏置动量轮正常工作，而滚动和偏航通道轮子故障条件下的系统重构。另外还论述了偏航陀螺故障，姿控系统其它部件正常情况下，控制系统采用Whecon原理与PIM控制相结合的设计。以上两种系统重构拟用于实际系统中，经过数学仿真验证，姿控系统在故障情况下能够完成基本任务。     

On adaptive spatial-temporal processing for airborne surveillanceradar systems

Implementing the optimum spatial-temporal (angle-Doppler) processor involves two crucial issues: the selection of processing configurations, and the development of adaptive algorithms which can efficiently approach the performance potential of the selected configuration. Among the three available configurations, the joint-domain, the cascade space-time, and the cascade time-space, this work shows that, in contrast to a popular belief, the detection performance potentials of both cascade configurations can fall far below that of the joint-domain optimum. In addition, this work presents a new adaptive algorithm, called the Joint-Domain Localized Generalized Likelihood Ratio detection (JDL-GLR), which is data efficient i.e., with fast convergence to the joint-domain optimum, as well as computationally efficient, together with such desirable features as the embedded constant false-alarm rate (CFAR) and robustness in non-Gaussian interference     

k-ε-g紊流燃烧模型数值研究

本文对k-ε-g紊流燃烧模型中模型系数C_R,C_(g1),C_(g2)的选定和计算浓度脉动均方值g的不同方法进行数值研究。计算结果表明模型系数值的选定直接与化学反应速率有关,而其中C_R影响最大。g的计算虽然可有不同方法,而其中微分方程求解最佳。并用实验数据来验证计算结果。