分布式卫星系统仿真平台研究现状与技术分析

支持分布式卫星系统(DSS)开发和实验的仿真平台是DSS技术发展的关键技术之一,本文对DSS仿真平台现状和关键技术进行了分析。首先对比分析了现有3种典型的仿真平台,认为为追求尽可能高的逼真度,实时分布式仿真成为必然。继而从分布式计算角度分析了实时分布式仿真面临的分布性、实时性、仿真部件互操作性和可重用性的问题,而中间件技术可以很好地解决这些问题。最后讨论了中间件实现模式,并分析了中间件在DSS仿真中3种可能的应用方式。     

火星探测着陆系统开伞控制方法研究

文章通过对火星探测进入轨道的分析，提出了一种以动压为控制目标的开伞控制方法，并借鉴过载-时间控制法的相关思想，结合火星探测进入轨道的特点，研究了该开伞控制法的原理和实现方法。根据火星探路者的实际进入条件，采用该方法的分析结果与实际飞行中的开伞情况基本吻合。     

Characterization and Calibration of the CheMin Mineralogical Instrument on Mars Science Laboratory

A principal goal of the Mars Science Laboratory (MSL) rover Curiosity is to identify and characterize past habitable environments on Mars. Determination of the mineralogical and chemical composition of Martian rocks and soils constrains their formation and alteration pathways, providing information on climate and habitability through time. The CheMin X-ray diffraction (XRD) and X-ray fluorescence (XRF) instrument on MSL will return accurate mineralogical identifications and quantitative phase abundances for scooped soil samples and drilled rock powders collected at Gale Crater during Curiosity’s 1-Mars-year nominal mission. The instrument has a Co X-ray source and a cooled charge-coupled device (CCD) detector arranged in transmission geometry with the sample. CheMin’s angular range of 5^° to 50^° 2θ with <0.35^° 2θ resolution is sufficient to identify and quantify virtually all minerals. CheMin’s XRF requirement was descoped for technical and budgetary reasons. However, X-ray energy discrimination is still required to separate Co?Kα from Co?Kβ and Fe?Kα photons. The X-ray energy-dispersive histograms (EDH) returned along with XRD for instrument evaluation should be useful in identifying elements Z>13 that are contained in the sample. The CheMin XRD is equipped with internal chemical and mineralogical standards and 27 reusable sample cells with either Mylar^? or Kapton^? windows to accommodate acidic-to-basic environmental conditions. The CheMin flight model (FM) instrument will be calibrated utilizing analyses of common samples against a demonstration-model (DM) instrument and CheMin-like laboratory instruments. The samples include phyllosilicate and sulfate minerals that are expected at Gale crater on the basis of remote sensing observations.     

基于数据包络分析的民航发动机维修效果评价

对民航发动机维修效果进行评价可以为发动机承修厂的选择提供决策支持,同时有助于发现发动机承修厂的潜在问题。为了实现发动机维修效果的评价,首先提出了评价指标选择的原则,在此基础上给出了发动机维修效果评价指标体系,建立了基于数据包络分析的C2WH模型的发动机维修效果评价模型,并对模型的构建过程进行了描述。针对决策单元输入输出...     

基于锥形压入的材料力学性能测试方法研究

通过压入测试以获取工程服役结构、小型构件和焊接结构焊缝过渡区的材料单轴本构关系参数,且根据材料本构关系参数来估算材料的压入硬度对于工程设计和安全评估有重要意义.对于幂律材料,本文依据锥形压入试验原理和弹塑性接触有限元分析(EPFEA),揭示了不同锥角的锥形压头其压入能量比与屈服应力之间存在线性关系,提出了基于能量原理预测金属材料本构关系部分关键参数(弹性模量、屈服应力和硬化指数)的CR-EMI (Constitutive Relationship based on Energy Method of Indentation)方法.同时,基于此种线性关系提出了由Hollomon本构关系模型参数预测硬度的H-EMI(Hardness based on Energy Method of Indentation)方法.通过对多种金属材料进行压入试验和有限元分析,验证了CR-EMI方法和H-EMI方法的有效性与精确性.     

缝隙间隙密封在阀设计中的运用

在某型飞机使用的阀中采用了缝隙间隙密封,依据计算、设计和试验阐述了泄漏量与压力、间隙尺寸、粘度及材质的关系。当间隙尺寸确定时,粘度越大,压力越小,材质越硬,则泄漏量越小,即阀在采用缝隙间隙密封时,泄漏量与工作介质的种类有关,每种工作介质粘度不同,泄漏量也不同,阀体材质越密,抗泄漏越好。因此,应尽量选择粘度系数大的介质和材质较密的材料。     

轮胎和缓冲支柱压力对摆振特性的影响

阐述了摆振分析的基本思路,分析了轮胎和缓冲支柱压力对摆振特性的影响,并结合某起落架计算比较了不同轮胎及缓冲支柱压力下的摆振特性。研究表明:当两者压力降低时,摆振临界阻尼均减小,有利于防摆;反之,摆振临界阻尼均增大,不利于防摆;但在两者压力变化的百分比相同的情况下,轮胎压力变化比缓冲支柱压力变化对摆振特性的影响更明显。     

通用的航电系统总线接口仿真平台的设计和应用

针对当前航电系统仿真器的缺点,提出了一种通用的航电系统总线接口仿真平台的设计思想,通过建立仿真数据库,从待仿真的航电系统设备中的接口信息抽象出属性和行为,然后用数据库的方式来描述,实现了仿真软件和仿真对象的分离,从而使该仿真平台具备了通用性和灵活性。该仿真平台已经在某型机航电系统地面联试中得到了应用。     

一种悬挂物兼容飞机航电与武器总线的设计方法

在某悬挂物作为通用系统挂装不同型号飞机时,由于不同型号飞机对该悬挂物采用航电和武器两种不同的总线通信方式,导致该悬挂物不能兼容挂载多型飞机。本文针对现有的总线应用情况,提出了一种悬挂物可兼容飞机不同总线通信方式的设计方案,并给出了方案的具体实现方法。     

Capillary flow rate limitation in asymmetry open channel

This paper focuses on the stability of capillary forced flow.In space,open capillary channels are widely used as the liquid and gas separation devices to manage liquid positioning and transportation.Surface collapse happens when the flow rate exceeds the critical value,leading to a failure of propellant management.Knowledge of flow rate limitation is of great significance in design and optimization of propellant management devices(PMDs).However,the capillary flow rate limitation in an asymmetry channel has not been studied yet in the literature.In this paper,by introducing an equivalent angle to convert the asymmetry corner to a symmetry one,the one-dimensional theoretical model is developed.The flow rate limitation can then be investigated as a function of the channel geometry as well as liquid property based on the model.Comparisons between the asymmetry and symmetry channels bring forth the characteristics of the two kinds of channels,and demonstrate good accordance between the new advanced model and the existing one in the literature.This theoretical model can provide valuable reference for PMD designers.