光纤加速度传感器

介绍开环和闭环两种光纤加速度传感器的特点、工作原理和结构简图，论述了温度对开环光纤加速度计的影响，以及解决此影响的方法，并给出了消除温度漂移误差的系统框图。     

定速拉伸的固体推进剂双轴板条的应力分析

对固体推进剂双轴板条试件进行了有限元分析，并考虑了粘弹性对应力结果的影响，分析结果表明，双轴板条试件中心域为平面应变状态，与发动机药柱中部内孔表面相似，并给出了计算杨氏模量所需的修正系数。     

刚弹性复杂系统在重力场中的定点转动

本文研究了轴对称刚－弹系统在重力场中的定点运动。首先利用模态分析方法将偏微分方程转化为常微分方程组，然后引进小参数将藕合的长周期运动和短周期运动分离。得到了这个非线性刚弹藉合系统的一次近似解，并利用它研究了刚－弹系统运动特性。     

加扰流环双组元LAE的流场数值仿真

采用交错网格系统SIMPLE算法和二维两相流场燃烧模型，对有不同形状(矩形、圆弧三角形及其混合结构)和位置扰流环的某双组元液体远地点发动机(LAE)流场进行了数值仿真计算。结果表明，扰流环对提高燃烧效率作用明显。环的位置应适中(不能过于靠近头部和喷管出口处)，其高度越大，燃烧效率越高。另外，矩形环的压力损失大于三角形环。     

固体火箭发动机点火过程内流场的二维预示

本文对固体火箭发动机点火过程的内场流进行了二维无粘非定常分析，计算得到了该阶段燃烧室中压强，温度和速度的分布。本文还提出了以近似预示复杂三维装药发动机内流场的有效积法。     

非线性系统的高阶线性化方法及其在二阶摄动制导中的应用

本文讨论了非线性系统相对于标称轨道的高阶线性化方法。文中在一阶线性展开的基础上,提出了高阶误差项的补偿方法,导出了计算二阶补偿项系数的线性方程组,并给出了补偿项的计算公式。然后,采用所得方法研究了飞行器的二阶摄动制导方法。     

Production of neutrons from interactions of GCR-like particles

In order to help assess the risk to astronauts due to the long-term exposure to the natural radiation environment in space, an understanding of how the primary radiation field is changed when passing through shielding and tissue materials must be obtained. One important aspect of the change in the primary radiation field after passing through shielding materials is the production of secondary particles from the breakup of the primary. Neutrons are an important component of the secondary particle field due to their relatively high biological weighting factors, and due to their relative abundance, especially behind thick shielding scenarios. Because of the complexity of the problem, the estimation of the risk from exposure to the secondary neutron field must be handled using calculational techniques. However, those calculations will need an extensive set of neutron cross section and thicktarget neutron yield data in order to make an accurate assessment of the risk. In this paper we briefly survey the existing neutron-production data sets that are applicable to the space radiation transport problem, and we point out how neutron production from protons is different than neutron production from heavy ions. We also make comparisons of one the heavy-ion data sets with Boltzmann-Uehling-Uhlenbeck (BUU) calculations.     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

近期商用单级入轨飞行器的可行性

讨论了单级入轨火箭推进飞行器,尤其是使用航天飞机外置贮箱和六个航天飞机主发动机的一次性使用飞行器的可靠性和发射费用。减小发动机质量将是方案改进的主要方面。如果低成本、小质量的主发动机研制成功,那么一次性使用 SSTO(单级入轨)飞行器将拥有商用发射前景,而且有利于可重复使用 SSTO 飞行器的研制。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.