基于电阻法的工艺液位传感器测量系统及其校准装置的研制

介绍了一种基于电阻法的工艺液位传感器测量系统的设计与实现,该传感器测量系统包括利用液位传感器、点式液位传感器、耗尽关机液位传感器与剩余液位传感器及对应的变送器。设计了相应的半自动校准系统对传感器的精度进行标定,分析了测量结果的不确定度。经过测试,所有传感器各项指标均满足设计要求。该传感器的研制解决了现有容积计量及液压试验系统不能对贮箱各不同部位进行容积和高度监测的问题。     

A two-step weighted least-squares method for joint estimation of source and sensor locations: A general framework

It is well known that the Two-step Weighted Least-Squares(TWLS) is a widely used method for source localization and sensor position refinement. For this reason, we propose a unified framework of the TWLS method for joint estimation of multiple disjoint sources and sensor locations in this paper. Unlike some existing works, the presented method is based on more general measurement model, and therefore it can be applied to many different localization scenarios.Besides, it does not have the initialization and local convergence problem. The closed-form expression for the covariance matrix of the proposed TWLS estimator is also derived by exploiting the first-order perturbation analysis. Moreover, the estimation accuracy of the TWLS method is shown analytically to achieve the Cramér-Rao Bound(CRB) before the threshold effect takes place. The theoretical analysis is also performed in a common mathematical framework, rather than aiming at some specific signal metrics. Finally, two numerical experiments are performed to support the theoretical development in this paper.     

Effects of yaw-roll coupling ratio on lateral-directional aerodynamic characteristics

Experimental investigation of large amplitude yaw-roll coupled oscillations was conducted in a low-speed wind tunnel using an aircraft configuration model. A special test rig was designed and constructed to provide different coupled motions from low to high angles of attack.A parameter ‘‘coupling ratio" was introduced to indicate the extent of yaw-roll coupling. At each pitch angle, seven coupling ratios were designed to study the yaw-roll coupling effects on the lateraldirectional aerodynamic characteristics systematically. At high angles of attack, the damping characteristics of yawing and rolling moments drastically varied with coupling ratios. In the coupled motions with the rotation taking place about the wind axis, the lateral-directional aerodynamic moments exhibited unsteady characteristics and were different from the ‘‘quasi-steady" results of the rotary balance tests. The calculated results of the traditional aerodynamic derivative method were also compared with the experimental data. At low and very high angles of attack, the aerodynamic derivative method was applicative. However, within a wide range of angles of attack, the calculated results of aerodynamic derivative method were inconsistent with the experimental data, due to the drastic changes of damping characteristics of lateral-directional aerodynamic moments with yaw-roll coupling ratios.     

表面处理对聚酰亚胺柔性复合材料粘结性能的影响

使用聚酰亚胺(PI)膜和PI纤维编织布制备深空探测用柔性织物复合材料,研究表面处理对PI膜和PI纤维编织布之间粘结性能的影响。采用自制表面处理剂分别对PI膜和PI纤维编织布的表面进行处理,再经硅橡胶胶黏剂粘结制备柔性复合材料。使用T剥离强度试验方法测试柔性织物复合材料的层间胶接性能,并分析复合材料剥离面的形貌状态。结果显示,PI膜和PI织物的表面处理可以显著提高柔性织物复合材料的T剥离强度。其中,PI膜和PI织物未经表面处理时,柔性织物复合材料的T剥离强度为8.9 N/cm。对PI膜进行表面处理,或者对PI膜和PI织物均进行表面处理的情况下,柔性织物复合材料的T剥离强度增加至11.7 N/cm和12.8 N/cm,分别提高了31.5%和43.8%。这表明对PI膜及PI织物进行合理的表面处理,可以显著提高柔性织物复合材料的胶接性能。     

卫星控制系统测试数据自动判读系统设计

针对卫星控制系统测试数据类型多和数据量大的特点,人工判读方式存在判读时间长和判读精度不够高等不足,分析了卫星控制系统测试数据的变化规律,建立了测试数据的判读规则,在此基础上完成自动判读方法设计和自动判读系统设计,该系统能够按照设置的判读规则进行自动判读,对判读结果进行实时显示和存储,提高了测试效率和判读的准确性.     

简化DDF算法及其在单星对星无源定轨跟踪中的应用

单星对星无源定轨跟踪是典型的非线性滤波问题,其中非线性滤波算法至关重要.DDF.算法具有良好的精度与稳定性且适用范同更广,不过计算量较大.单星对星无源定轨中系统噪声通常是加性高斯的,根据这一特点对标准DDF算法进行简化.简化后加性噪声可以进行单独处理,基于此,提出一种计算复杂度更低的SD-DF算法,并运用于仅测角条件下的单星对星无源定轨跟踪.SDDF算法具有比EKF更高的精度和更好的稳定性,其性能与标准DDF相同但是计算耗时更少,特别适合于单星对星无源定轨跟踪实时处理.     

科技期刊信息化建设的思路与实践

面对信息化时代带来的机遇和挑战,科技期刊如何应对,以适应潮流的发展,满足更多科技工作者的需求,抓住广大读者的需求,近而提升科技期刊的影响力。文章通过对《航天器工程》期刊编辑部信息化建设和网络建设,结合实践经验,对科技期刊信息化建设进行了分析。     

采用平面叶栅模拟压气机动叶叶尖间隙流

 通过对动叶叶尖进口端壁附面层的性状分析,指出采用平面叶栅模拟动叶叶尖间隙流端壁面静止(工况 1 )和仅有端壁面运动 (工况 2 )进口端壁附面层与真实情况的差异。根据转子静止静子转动这一相对运动思想设计出动叶叶尖间隙流实验模型 (工况 3)。对上述 3种工况叶片表面静压分布和叶尖间隙流进行了实验测量。实验表明:工况 3比 2,1叶尖间隙泄漏涡生成得早且间隙泄漏流量较大;采用无粘叶尖间隙流计算模型,在叶片后面部分计算结果与实测值吻合较好,而在叶片前缘部分由于流向压力梯度较大使得计算值大于实测值。     

SACMA和QMW试验方法对复合材料层合板低速冲击后压缩行为的影响

采用了 SACMA标准和一种小试样试验方法对复合材料层合板低速冲击后的压缩 (CAI)行为进行试验研究 ,从层合板的冲击损伤分布、冲击后压缩破坏过程 ,以及层合板的准静态横向压缩、开孔后压缩等多方面进行对比 ,结果表明 ,这两种试验方法存在很大差别 ,试验方法不同 ,层合板低速冲击后的压缩行为也不同 ;采用 SACMA标准所测得的低速冲击后压缩强度更能全面反映基体韧性的优劣。作为 CAI试验标准 ,小试样试验方法还有待改进     

开关磁阻电机发电运行强励方案的研究与实践

从开关磁阻发电机的运行原理可以看出 ,合理和充分的励磁是发电工作的关键。本文提出了强化励磁的构想 ,设计了强励的解决方案 ,并进行了样机实验验证。分析和实验表明 ,强励方案对运行在低压宽转速系统中的开关磁阻发电机 ,可以获得显著效果