FRP固体火箭发动机壳体的非线性FW线型分析

对纤维增强复合材料（FRP）固体火箭发动机壳体的纤维缠绕（FW）线型进行了简要地分析。鉴于封头曲面上FW线型稳定性对于线型参数变化十分敏感，分析封头FW线型时，本文仍从测地线方面来考虑。依此，两赤道圆处FW角必须以左右封头几何尺寸及测地线FW条件来确定。在对筒身段非测地线FW可行性讨论中，提出了筒身段实现非测地线FW的条件，同时推导出了筒身段非测定地线FW运动控制的一般数学模型。     

降低NEPE推进剂燃速的途径探讨

通过对NEPE推进剂燃烧表面的热平衡分析，指出了影响推进剂燃速的3个因素：“嘶嘶”区（fizz）的温度梯度、凝聚相反应热和燃面温度，提高了降低NEPE推进剂燃速的可能途径，研究了某些燃速降速剂的作用及其对推进剂能量的影响。用实验证明了降低燃速几个途径的可行性。     

星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

基于主元分析法的液体火箭发动机传感器故障检测与诊断

针对液体火箭发动机的压力、温度、流量等传感器数据,给出了一种基于主元分析法的传感器故障检测与诊断方法。该方法能够在对测量参数相关性分析的基础上,将传感器测量值所组成的测量空间分解为主元和残差两个子空间,通过传感器实际测量数据与正常数据矩阵在残差子空间投影的比较,对传感器的故障进行检测与诊断。以某型LRE传感器组为研究对象,通过故障模拟,给出了该方法对4种典型传感器故障的检测与诊断实例。结果表明主元分析法对LRE传感器具有很好的故障检测和故障诊断能力。     

自由转子陀螺仪的伺服测试技术研究

自由转子陀螺仪是目前精度最高的一种陀螺仪,没有精密的力矩器,因此,只能采用双轴伺服法来辨识其漂移误差模型。介绍了双轴伺服测试法的基本原理,给出了双轴伺服转台的运动轨迹及重力矢量的变化规律。根据转台的运动特性,建立了自由转子陀螺仪的漂移误差模型,导出双轴伺服转台转角数据估计漂移误差模型系数的算法。从测试结果可以看出自由转子陀螺仪的长时间精度高,表明采用伺服测试法能够获得极高的测试精度,伺服转台可以作为测试自由转子陀螺仪精度的装置。     

三维非结构网格DSMC并行算法及应用研究

基于PC-CLUSTER机群并行体系结构与消息传递库MPI并行环境,研究了三维非结构网格DSMC并行算法。提出一类基于结构背景网格上的非结构网格动态分区策略,保证各子区域的分子数量大致相等,实现计算进程间的动态负载平衡。利用MPI库函数构造了两类符合DSMC并行原理的通讯法:单步通讯法与多步通讯法。采用单控制多数据流(SPMD)以及Master/Slave并行模式,设计了三维非结构网格DSMC整体并行算法。给出了跟踪模拟分子在四面体网格间迁移运动的详细计算过程。最后对全尺寸航天飞机高超声速绕流进行了并行模拟,验证并行算法的有效性。     

推进剂功能组分作用机理研究——(Ⅱ)丁羟/铝粉体系

在丁羟 /铝粉组成的实验体系中 ,通过测定药浆流变性的变化 ,研究了一些功能组分在推进剂中的作用机理。结果表明 ,醇胺络合物TEA·BF3 是推进剂中铝粉的偶联剂 ,在其它功能组分存在的条件下 ,仍能竞争吸附于铝粉颗粒表面。实验发现 ,在Al/HTPB/IPDI体系药浆中 ,TEA·BF3 与MAPO间存在明显的协同效应 ,使药浆流变性能显著恶化。文中对其它一些功能组分在药浆中的作用机理也进行了分析探讨。     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.