基于四元数估计角速率的陀螺故障定位

当卫星速率积分陀螺的配置冗余度不满足一致性检验条件时，不能单纯利用硬件冗余实现陀螺的故障定位。鉴于角度和角速度敏感器的输出通过卫星运动学相关，本文利用姿态测量敏感器的输出来诊断陀螺故障。首先根据姿态测量敏感器的输出得到卫星姿态四元数，进而根据四元数动力学方程得到粗略的姿态角速度信息，并将此角速度作为输出信息用于对卫星动力学方程的滤波，从而得到较精确的角速度信息，为单冗余度陀螺组件的故障定位提供解析冗余信息。利用四元数方法可以避免出现奇点。仿真结果证明了该方法的有效性。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

76°/40°双三角翼前缘涡破裂及其控制实验研究

流动显示结果表明,喷流能有效地推迟双三角翼前缘涡的破裂,且随着攻角的增大,前缘涡破裂位置逐渐推后,喷流极大地改善了大攻角情况下前缘涡的非对称破裂特性,能有效地克服可能出现的机翼的"摇滚"现象.另外,后缘喷流可以减弱乃至消除前缘涡混掺现象的发生,进而有利于飞行器的操纵.     

高速电路PCB板中电磁干扰的研究

结合设计印制电路板的实际经验 ,首先介绍了电磁兼容和电磁干扰 ,其次分析了高速电路PCB设计中产生电磁干扰的主要原因 ,最后提出了防止和抑制电磁干扰的方法以及提高电磁兼容性的具体措施。     

强场脉冲充磁退磁装置

介绍了充电电容器通过磁路瞬时放电产生强磁场的原理 ,选择回路参数可实现高矫顽力类永磁材料的充磁或者退磁 ,介绍了所研制的脉冲充磁退磁装置的性能。     

NIM4#铯冷原子喷泉钟新一代时间频率基准

回顾了NIM4 #钟实现 5 μK冷原子云 ,74cm原子喷泉和 0 95Hz线宽Ramsey跃迁实验 ,报道了 9 19GHz微波锁定到铯原子秒定义跃迁 ,频率稳定性达到 (5 - 7)× 10 -15(15 0 0 0s)。目前我们正在进行不确定度评估 ,可望不确定度进入 10 -15量级 ,建立我国新一代时间频率基准装置。     

通用电学参数自动校准系统接口研制

为了提高日常检定工作的工作效率,介绍一种基于LabVIEW平台下,以为接口的电学参数自动检定系统的组成、仪器控制方式及系统的特点。     

附加准直器的带顶盖静电分析器的数值模拟

对准直器限定视场的带顶盖的1／4球分析器的物理特性分析了数值模拟，相应的模拟程序是在修改裸分析器模拟程序后发展起来的。新程序了准直器引起的分析器结构配置的变化，且被应用于一个带准直器的分析器样本，产生了传输函数和几何因子的模拟结果。     

捷联惯导系统计算机硬件检测原理与实现

介绍一种实用捷联惯导系统计算机结构。主模块与美国SESCO/TITAN公司的SECS86/20模块兼容,检测软件可以检测板上大中规模集成芯片,具有检测全面、准确的特点,从方法与原理上都具有通用性,可以方便地移植到其它类似的机器上。该软件已用于实际系统。