k-ε-g紊流燃烧模型数值研究

本文对k-ε-g紊流燃烧模型中模型系数C_R,C_(g1),C_(g2)的选定和计算浓度脉动均方值g的不同方法进行数值研究。计算结果表明模型系数值的选定直接与化学反应速率有关,而其中C_R影响最大。g的计算虽然可有不同方法,而其中微分方程求解最佳。并用实验数据来验证计算结果。     

一种新的六端口测量系统自校准方法

提出了一种新的六端口自校准方法.本方法从六端口相对功率理论出发,导出了六端口系统常数的自校准方程,给出了求解系统常数初值的方法,并利用梯度法对方程组求解,仿真结果表明用一个匹配负载、四个失配负载就可以解出系统常数.     

自由段航天器惯性/星光组合定位方法研究

在基于失准角观测量的自由段航天器惯性/星光组合定位中,由于系统状态方程的特性,使得位置速度输出不理想。针对这一问题,对量测信息进行了扩展,重建系统量测方程,然后进行以位置-角度为观测信息的最优滤波。仿真结果表明,该方法能够较大程度地提高自由段组合定位系统对于位置、速度的修正效果。     

固体推进剂燃烧中凝相粒子的激光全息测试

概述了测试凝相粒子尺寸的基本方法，较详细地阐述了研究燃烧场凝相粒子尺寸分布的激光全息测量方法和测试结果。     

星光折射航天器自主定轨方案比较

当星光透射大气发生折射时 ,用星光折射角精确地反映星光在大气中离地球表面的高度 ,并建立高度、航天器与地球的几何关系。通过对折射角进行观测 ,间接测得地平 ,从而改善了用地平仪直接测地平所造成的航天器自主导航精度低的不足。本文提出了几种利用星光折射的航天器自主定轨方案 ,并作了细致的仿真实验 ,对直接和间接两种测量地平方法以及几种星光折射自主定轨方案进行了分析比较。     

Ariane transfer vehicle in service of man in orbit

The Ariane transfer vehicle (ATV), an Ariane 5 borne, unmanned propulsion vehicle, is designed to transport the logistics needed to resupply the International Space Station (ISS) and the man tended free flyer (MTFF) step 2 with pressurized and unpressurized cargo and to dispose the waste. The ATV is an expendable vehicle and is disposed of by a safe atmospheric burn up. In accordance with the AR5 schedule it should be operational in 1996 for missions toward ISS and beyond the year 2000 for MTFF 2 missions. The main constituents of the proposed ATV are the modified AR5 third stage L5, an upgraded VEB steering the launcher as well as the ATV and the P/L-adaptor providing mechanical and umbilical links to the payload. The mechanical part of the RVD-kit will be placed on the payload-module, the main RVD sensors are located on the adaptor and the needed computer intelligence will be integrated on the VEB. To minimize the development, and recurring costs, the ATV concept fully complies to the idea of maximum use of existing hardware and software, mainly from the AR5, Hermes and Columbus programs thus minimizing development and recurring costs. The ATV is compatible to ISS, MTFF and OMV and is able to transport logistic modules compatible with NSTS and U.S.-expendable launchers.     

航天飞行器防热部件烧蚀行为的数值模拟

对航天飞行器防热部件在氧－煤油发动机火焰喷吹下的烧蚀行为进行了有限元数值模拟。利用“杀死”单元的方法建立防热部件瞬态温度场的有限元模型，实现了烧蚀边界的退缩，从而完成了对烧蚀尺寸变化的定量描述。烧蚀开始于4．59s，到12s时线烧蚀量为1．47mm。计算结果与试验的实测结果一致。     

LISA — a study of the ESA cornerstone mission for observing gravitational waves

The primary objective of the Laser Interferometer Space Antenna (LISA) mission is to detect and observe gravitational waves from massive black holes and galactic binaries in the frequency range 10⁻⁴ to 10⁻¹ Hz. This low-frequency range is inaccessible to ground-based interferometers because of the unshieldable background of local gravitational noise and because ground-based interferometers are limited in length to a few km. LISA is an ESA cornerstone mission and recently had a system study (Ref. 1) carried out by a consortium led by Astrium, which confirmed the basic configuration for the payload with only minor changes, and provided detailed concepts for the spacecraft and mission design. The study confirmed the need for a drag-free technology demonstration mission to develop the inertial sensors for LISA, before embarking on the build of the flight sensors. With a technology demonstration flight in 2005, it would be possible to carry out LISA as a joint ESA-NASA mission with a launch by 2010 subject to the funding programmatics. The baseline for LISA is three disc-like spacecraft each of which consist of a science module which carries the laser interferometer payload (two in each science module) and a propulsion module containing an ion drive and the hydrazine thrusters of the AOCS. The propulsion module is used for the transfer from earth escape trajectory provided by the Delta II launch to the operational orbit. Once there the propulsion module is jettisoned to reduce disturbances on the payload. Detailed analysis of thermal and gravitational disturbances, a model of the drag-free control and of the interferometer operation confirm that the strain sensitivity of the interferometer will be achieved.     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

压电智能结构传感器/作动器位置优化研究

研究压电主动结构振动控制当中传感器／作动器的位置优化问题。从系统的状态空间方程出发，在系统可控性、可观性Grammian矩阵特征值的基础上来描述性能指标，以控制能量最小化和传感能量最大化作为优化目标，利用遗传算法（GE）进行优化计算，计算过程中对传感器／作动器的位置采用二进制编码加以描述。通过对一压电板结构的仿真计算对该方法进行了验证，优化计算结果与枚举法结果完全相符，从而证明了方法的有效性。