喷管扩张段烧蚀的“台阶效应”计算

当喉衬和扩张段内衬采用具有不同烧蚀率的材料时,常出现“台阶效应”.本文以气动热化学烧蚀机理为基楚,提出应用适当的对流换热和加剧的化学反应计算对台阶效应区进行修正的方法,使台阶效应区的烧蚀率预示更切合实际工况.     

钛合金胶接点焊接头的性能检测

研究了不同焊接电流下钛合金板胶接点焊接头的A扫描信号和C扫描图像特征,并进行了拉伸-剪切试验。结果表明:通过观察C扫描图像的特征与A扫描信号的变化,能够划分胶接点焊接头的胶层区、热影响区、熔合区、熔核区以及焊接缺陷;随着电流(7~10 k A)的逐渐增大,接头熔核直径呈递增趋势,相应的失效载荷从7 231.5增加到10 939.0 N;当电流为7 k A时,在C扫描图像上反映出飞溅缺陷,此时接头失效载荷远小于没有出现飞溅的接头,可见飞溅降低了胶接点焊接头的拉剪载荷。     

Multi-mode optimal fuzzy active vibration control of composite beams laminated with photostrictive actuators

Firstly, a multi-field coupling finite element formulation of composited beam laminated with the photostrictive actuators is developed in this paper. Moreover, an optimal fuzzy active control algorithm is also proposed on the basis of the combination of optimal control and fuzzy one.This method opens a new avenue to resolve the contradiction between the linear system control method and nonlinear actuating characteristics of photostrictive actuators. The desired control for suppressing multi-modal vibration of photoelectric laminated beam is firstly obtained through optimal control and then the fuzzy control is used to approach the desired mechanical strain induced by photostrictive actuators. Thus, the multi-mode vibration control of beam is realized.In the design process of optimal fuzzy controller, the design of fuzzy control is independent of optimal control. The simulation results demonstrate that the proposed control method can effectively realize multi-modal vibration control of photoelectric laminated beams, and the control effect of optimal fuzzy control is better than that of optimal state feedback control.     

无人水面艇海洋调查国内应用进展与展望

针对浅水区、污染区、极地等复杂海洋环境，传统海洋调查手段劳动强度高、安全风险大、作业效率低。无人水面艇具备无人、高效等特点，非常适合在上述复杂海洋环境中作业，并于近年来在海洋调查领域中得到了快速发展与广泛应用。从海洋调查领域中无人水面艇的优势、国内外典型的无人水面艇和应用案例入手，深入分析了我国无人水面艇海洋调查的现状，并对未来的技术发展方向进行了展望。实践表明，应用无人水面艇进行海底地形地貌调查的技术已基本成熟，水深数据质量和自主导航精度均可满足规范要求。在未来，须将无人水面艇的应用进一步扩展至物理海洋、海洋生物、海洋化学等专业领域，并加快研制基于可再生能源的长航程无人水面艇，以开展全球性海洋调查。     

Crystal orientation and morphology of a lamellae in wrought titanium alloys: On the role of microstructure evolution in b processing

To obtain high-quality aviation forgings of titanium alloys, b forging is an essential processing step which must be considered throughout a production process. In this work, the effect of b forging on the crystal orientation and morphology of lamellar a was experimentally investigated in a two-phase titanium alloy. Strong dynamic recovery during b working resulted in the formation of low-angle grain boundary(LAGBb) inside b grains. The lamellar a can penetrate through the LAGBb, leading to similar intra a LAGBs on subgrain boundaries. Deformation banding occurs at high strain rates, and both diffusive and sharp boundaries of deformation bands can be observed.A continuous change of the b orientation in diffusive boundaries results in the formation of fine and disordered a lamellae without intra-lamellar boundary to hold the Burgers orientation relationship(OR). On sharp boundaries, it is prone to producing continuous grain boundary a(aGB) with a highly similar orientation along the boundaries. Meanwhile, there may exist several lower-angle boundaries within the grain boundary a for a smoother orientation change on the b grain boundary.     

基于电力综合集成的多绕组双流发电机技术分析

为解决采用传统发电机的移动电站输出电源种类单一,而采用多台发电机又会造成底盘过载影响机动性的问题,文章基于电力综合集成技术,分析研究实现发电机的双流发电的关键技术,突破发电机多绕组发电及励磁解耦等难题,减小了电机体积、降低了电机重量,有利于移动电站的多功能化与小型化设计。     

基于自适应径向基网络的舰船RCS统计特征识别方法

文章采用舰船RCS频域起伏序列的均值、标准差为识别特征向量,利用提出的基于样本密度的自适应径向基网络,进行舰船分类识别研究。自适应径向基网络采用改进的自适应PSO方法估计样本密度最优邻域半径,实现径向基网络中心的自适应选择。改进的自适应PSO方法采用能反映样本聚类特点的BWP指标为适应度评价函数,采用快慢结合的高斯自适应惯性权重调节策略,提高了最优样本密度邻域半径的搜索速度和精度。实验结果表明,自适应径向基网络能自适应获得径向基网络最优识别率对应的RBF中心及其位置分布,减少了对建模人员经验的依赖,提高了反舰导弹对舰船类型的识别分类能力。     

可拓模式识别算法中经典域的确定方法

可拓模式识别算法是根据各个关联度的对比来识别最终的模式,其中经典域区间的确定有着重要的作用。传统的经典域确定方法是基于数理统计学的,不适用于小样本数据,数据不完全以及数据分布未知等复杂情况。引入Bootstrap算法,并和传统的方法对比,更精确地确定了经典域区间。     

Wilkinson定理扰动界的改进估计

Wilkinson定理是代数特征值问题中的一个经典定理,文章给出了Wilkinson定理的结果中关于扰动矩阵上界的另一种估计形式,并指出该形式对Wilkinson定理具有一定的改进。     

基于层次分析法的综合射频架构选取技术研究

综合射频系统是作战飞机航空电子系统的重要组成部分，它们是作战飞机通过无线电方式感知外界信息的重要系统。系统架构的选取直接影响了飞机的作战性能，针对以往架构选取依赖大量定性分析而缺乏定量对比问题，提出了基于层次分析法的综合射频架构选取技术，该技术能够有效地根据不同的任务需求和平台需求，综合考虑定量和定性因素，给出更为合理对比分析结果，为综合射频系统的系统设计提供技术支撑。该技术也可推广到航空领域其他多目标决策问题的应用。