2007年上市民航运输企业财务分析

利用2007年财务报告，对中国国际航空公司（简称国航）、中国南方航空集团（简称南航）、中国东方航空集团（简称东航）、海南航空公司（简称海航）、上海航空公司（简称上航）5家A股上市民航运输企业财务状况进行了分析，采用比较分析法、比率分析法对5家企业的财务报表进行分析。结果表明，传统财务报表分析方法是从盈利水平和财务风险的角度进行的，从盈利质量、资产质量和现金流的视角能更全面系统地进行财务报表分析，为相关信息使用者决策提供更科学的依据。表明5家A股上市民航运输企业中，在资产规模、获利能力以及创造现金流方面，国航具有总体相对优势，在净资产率和现金流方面，海航具有相对优势。     

频率计数器在航天器信号频率测量中的适用性分析

从频率计数器的工作原理出发,分析了航天器测控通信中常用的调相信号、调频信号和相移键控信号的频率测量误差,给出了调相信号和调频信号的测量误差表达式。使用频率计数器对上述3种航天器信号进行了频率测量试验。理论分析和试验结果表明,频率计数器适用于航天器调相信号和调频信号的频率测量,不适用于相移键控信号的频率测量。在实际使用中,为保证测量精度,应根据被测信号的调制方式选择适当的测量方法。     

Predictive Modeling and Parameter Optimization of Cutting Forces During Orbital Drilling

To optimize cutting control parameters and provide scientific evidence for controlling cutting forces,cutting force modeling and cutting control parameter optimization are researched with one tool adopted to orbital drill holes in aluminum alloy 6061.Firstly,four cutting control parameters(tool rotation speed,tool revolution speed,axial feeding pitch and tool revolution radius)and affecting cutting forces are identified after orbital drilling kinematics analysis.Secondly,hybrid level orthogonal experiment method is utilized in modeling experiment.By nonlinear regression analysis,two quadratic prediction models for axial and radial forces are established,where the above four control parameters are used as input variables.Then,model accuracy and cutting control parameters are analyzed.Upon axial and radial forces models,two optimal combinations of cutting control parameters are obtained for processing a13mm hole,corresponding to the minimum axial force and the radial force respectively.Finally,each optimal combination is applied in verification experiment.The verification experiment results of cutting force are in good agreement with prediction model,which confirms accracy of the research method in practical production.     

星光折射连续修正方法及制导规划

针对星光折射模型本身固有的缺点，对星光折射连续修正方法进行了研究，该方法首先探索折射星的分布规律，而后采用Unscented卡尔曼滤波算法+多星连续观测的方案实现定位。同时，对可用星与选星要素和基于突防规划的星光制导弹道设计两方面进行了研究，在星光制导制约机理研究的基础上，提出了惯性/星光制导规划方法，该方法包括导航星的优选策略、导航星优选技术和星点位置的精确计算3步。最后，介绍了星光制导系统的系统组成和功能原理。     

Command filtered sliding mode trajectory tracking control for unmanned airships based on RBFNN approximation

This paper presents two sliding mode controllers to address the trajectory tracking problem of unmanned airships in the presence of unknown wind disturbance. The sliding mode controller proposed first is designed by a fast power rate reaching law(FPRRL). The disturbance is compensated by a radial basis function neural network (RBFNN). To avoid the aggressive adaptation, the controller is augmented by a command filter. The controller provides good robustness and tracking performance with no chattering under the hypothesis of ideal wind field. However, serious chattering occurs when simulation is performed under discontinuous wind field. To simulate the wind in practice, the wind field employed in the simulation is generated by the combination of a constant field and white noise. The controller is improved subsequently with an extended model to suppress the chattering induced by the white noise. The enhanced controller manipulates the derivation of system input, thus attenuating the chattering. Stability analysis shows that both controllers drive the tracking error into a controllable small region near zero. Simulations are provided to validate the performance of the proposed controllers under different wind hypothesis.     

碳纤维复合材料结构损伤的自检方法研究进展

监测碳纤维增强树脂基复合材料(CFRP)的结构损伤是一个关键问题。本文就目前国内外研究较热且应用前景较大的一类新型无损检测技术——基于CFRP导电网络的自检技术进行综述,总结了直流法和交流法的原理和技术特点,尤其是对各种检测方法适用的环境和损伤类型进行了评估。最后指出了发展出一套智能化的CFRP结构损伤自检体系所要进一步开展的研究工作。     

三角形截面高柔结构横风向振动的风洞试验研究

本文介绍了正三角形截面高柔结构模型在均匀流场和湍流场中三种迎角下的横风向风振响应风洞试验结果，分析了三角形截面高柔结构的横风向涡激振动现象与驰振危险性，获得了一些数据和结论。     

基于激光旋切法的陶瓷材料盲孔加工方法研究

介绍了激光打孔的基本原理,对激光能量、离焦量、轨迹在激光旋切法加工盲孔过程中对孔形和表面质量的影响进行了分析和试验验证,并给出了一般规律.依据试验结果确定了合理工艺参数,采用旋切法在碳纤维增强碳化硅陶瓷基复合材料（Cf/SiC）上打出了孔径为1 mm,孔深为1.1 mm,锥度小于15°的盲孔.