《司法会计》教学改革初探

通过分析法学院校当前《司法会计》课程教学工作现状及存在的问题，提出了组织力量，统编教材；适当增加课时等解决问题的相应对策，进而促使《司法会计》教学质量进一步提高。     

TC21钛合金的微观组织对力学性能的影响

研究了两相钛合金TC21关于两种不同微观组织(片状组织和网篮组织)的拉伸性能、断裂韧性和疲劳裂纹扩展性能.结果显示:片状组织相比网篮组织有相近的拉伸强度,但塑性较差;两者的韧性相差不大,但增韧机理不同;网篮组织在中低速扩展区的扩展速率和片状组织几乎相同,但在较高速扩展区显示略低的扩展速率;加载方向对两种组织的疲劳裂纹扩展速率基本无影响;和其他钛合金类似,TC21在Paris区存在转折.     

An interacting multiple model approach for target tracking withglint noise

The application of the interacting multiple model (IMM) estimation approach to the problem of target tracking when the measurements are perturbed by glint noise is considered. The IMM is a very effective approach when the system has discrete uncertainties in the dynamic or measurement model as well as continuous uncertainties. It is shown that this method performs better than the “score function” method. It is also shown that the IMM method performs robustly when the exact prior information of the glint noise is not available     

Nondestructive Characterization of RBSOA of High-Power Bipolar Transistors

Reverse-bias safe operating area (RBSOA) of high-power Darlington transistors is characterized using a 120 A/1000 V nondestructive reverse-bias second breakdown tester designed and fabricated at Virginia Polytechnic Institute and State University. Elaborate RBSOA characteristics are generated with different forward/reverse base drives and collector current levels. The effects of elevated case temperature and second-base drive on RBSOA of four-terminal Darlington devices are also discussed.     

大二进制对象在计算机能力考试系统中的应用

以作者所开发的计算机考试系统为例，阐述了大二进制对象数据类型(BLOB)使用方法，包括将一个大对象（文本、图像、声音等）存入一个BLOB变量中、通过BLOB变量读写数据库中的大对象等内容。     

加工时间依赖工件位置的单机成组排序问题

排序问题是一类重要的组合优化问题,现代排序问题突破了经典排序问题的种种假设,有着越来越广阔的应用前景。对加工时间依赖于工件位置的单机成组排序问题进行了研究,讨论了成组技术中,要求同一组内工件必须连续加工,加工时间的函数变量是工件所在的加工位置,目标函数分别为极小化最大完工时间与总完工时间。分别给出其多项式时间的最优算法。     

离心叶轮出口与无叶扩压器内部流动特性的DPIV实验研究

在叶轮转速n＝1500rpm对应的设计工况下,利用两维数字式粒子图像速度场仪(DPIV)对风机模型从叶轮出口至无叶扩压器区域内部流动状态进行整场测量,在"锁相"状态下获得沿扩压器宽度方向上三个径向面的瞬态速度场、涡量场的分布,并进一步对时均流场的流动特性进行全面讨论.测量结果表明:设计工况下,叶轮出口流动呈现典型的"射流-尾迹"流动结构,其对无叶扩压器内部流动状态具有深刻的影响.旋涡由叶轮叶片表面边界层的粘性切应力产生,并随流动被输运至下游无叶扩压器,然后随着流动的均匀化而逐渐消失.涡量的分布及变化反映了无叶扩压器内部流体相互掺混和能量传递、重新分布从而达到均匀化的过程.随着半径的增加,尽管无叶扩压器内流动在圆周方向亦逐渐趋于均匀化,但沿宽度方向的差距未得到改善,这将导致沿轴向α不变原则设计的叶片扩压器的二元叶片无法避免冲击损失.     

Ultraviolet spectrometer experiment for the Voyager mission

The Voyager Ultraviolet Spectrometer (UVS) is an objective grating spectrometer covering the wavelength range of 500–1700 Å with 10 Å resolution. Its primary goal is the determination of the composition and structure of the atmospheres of Jupiter, Saturn, Uranus and several of their satellites. The capability for two very different observational modes have been combined in a single instrument. Observations in the airglow mode measure radiation from the atmosphere due to resonant scattering of the solar flux or energetic particle bombardment, and the occultation mode provides measurements of the atmospheric extinction of solar or stellar radiation as the spacecraft enters the shadow zone behind the target. In addition to the primary goal of the solar system atmospheric measurements, the UVS is expected to make valuable contributions to stellar astronomy at wavelengths below 1000 Å.     

Third-Order Loop Filter Design for Acceleration-Rate Tracking

A perfect third-order loop filter design that can be implemented as a digital filter is obtained which minimizes the noiseless steady-state acceleration rate (jerk) error for a fixed loop noise bandwidth. Simulations were performed to obtain transient responses of the third-order loop plus a sample fourth-order loop under a jerk input. The results enable one to obtain a loop design that minimizes the loop noise bandwidth required for a given steady-state jerk error and thus obtain better noise jitter performance.