基于虚拟目标点制导的误差分析

基于标准弹道确定的虚拟目标点位置在弹道小扰动的情况下能够确保闭路制导的精度,但是在弹道大扰动时,虚拟目标点位置修正误差变大,能否保证闭路制导的精度值得探讨。通过给弹道一个大扰动进行了弹道仿真,结果表明,弹道大扰动会引起闭路制导的方法误差变大。     

Electrolytic Passivation of Nitinol Shape Memory Alloy in Different Electrolytes

The corrosion behavior of the nitinol alloy was studied in various corrosion media of different Cl–ion concentrations. The results demonstrate that the Cl–ion concentration has significant influences on the corrosion behavior of the nitinol alloy. In order to enhance the corrosion resistance, protective films were generated on the surface of the nitinol alloy by means of the electrochemical passivation method, for which five different electrolytic solutions were investigated. The surface analysis indicates full growth of all samples pas-sivated in the different electrolytic solutions with layers, however, showing different morphological features. Without any defects like micro-cracks and pores, the surface of the samples passivated in the molybdate solution turns out smoother and denser than those pas-sivated in other solutions. It is shown that the electro-chemical passivation will reduce Ni content but increase Ti content in the surface, reaching the Mole ratio of Ti:Ni=9.01:1 on the outermost surface. Potentiodynamic polarization test demonstrates that the samples electrochemically passivated in the molybdate solution present a significant increase in breakdown potential due to titanium enrichment on the outermost surface.     

DC Characteristics of Gamma-ray Irradiated SiGe HBT in Comparison with Si BJT

The changes of DC characteristics of SiGe HBT after being submitted to γ-ray irradiation of 700 krad, 7 000 krad and 10 000 krad were compared to those of Si BJT. Generally speaking, Ib and Ib–Ib0 increase with the doses increasing. For SiGe HBT, with the doses increasing, Ic and Ic–Ic0 as well as the related changes of the current gain (β) will decrease at higher Vbe, while for Si BJT, with the doses increasing, after irradiation, Ib and Ic–Ic0 increase; β and its related changes also decrease with their differences, however, tending to be very small at high doses of 7 000 krad and 10 000 krad. Moreover, given the same doses, the decreases of β are much larger than SiGe HBT, which shows that SiGe HBT’s anti-radiation performance proves to be better than Si BJT. Still, in SiGe HBT, some strange phe-nomena were observed: Ic–Ic0 will increase after the radiation of 7 000 krad in less than 0.65 V and as will β in less than 0.75 V. The mechanism of radiation-induced change in DC characteristics was also discussed.     

Effects of the Fabrication Processes of NC-Si:H Films on Their Mechanical Properties

Studies of nanoindentation were performed on nc-Si:H films to evaluate the effects of the fabrication processes on their mechani-cal properties. It is observed that with the decrease of the SiH4 contents, the grain size of the films increases gradually, and as does the crystalline volume fraction. The smaller the grains become, the more homogeneous the films, and the more even the hardness as well as the modulus will be. The hardness and the modulus will increase with the substrate’s temperature rising. The hardness and the modulus of the nc-Si:H films on the Si substrate prove to be higher than those on the glass substrate given the same technology parameters. How-ever, the films on the glass substrate appear to be more homogeneous.     

NONLINEAR FILTERING ALGORITHM FOR INS INITIAL ALIGNMENT

The initial alignment error equation of an INS (Inertial Navigation System) with large initial azimuth error has been derived and nonlinear characteristics are included. When azimuth error is fairly small, the nonlinear equation can be reduced to a linear one. Extended Kalman filter, iterated filter and second order filter formulas are derived for the nonlinear state equation with linear measurement equation. Simulations results show that the accuracy of azimuth error estimation using extended Kalman filter is better than that of using standard Kalman filter while the iterated filter and second order filter can give even better estimation accuracy.     

基于两相法的机翼结构几何优化设计

针对机翼结构的几何优化问题,提出了一种基于两相法的几何优化设计新方法。采用参数化命令流文件进行有限元建模,利用复合形法进行位置优化,利用MSC/NASTRAN进行尺寸优化,并将尺寸优化结果传递给复合形法作为复合形法进行操作的依据。算例表明,本文所提方法可行,所得结果可信度高。     

三维舵面绕流的N-S方程计算研究

基于粘性非结构混合网格,采用格心格式的有限体积法,应用Spalart-Allmaras湍流模型进行绕三维舵面流动的N-S方程数值模拟。操纵面铰链力矩的计算结果与风洞试验结果的对比分析表明,计算方法对粘性流动具有良好的适应性。对舵面铰链力矩随迎角、马赫数、雷诺数变化的规律也进行了分析研究。     

联合应用现代优化方法与S2流面计算进行多级涡轮的气动设计

本文联合应用S2流面正问题计算和多级局部优化设计对某三级涡轮进行多级气动优化设计。优化联合采用人工神经网络和遗传算法,流场计算采用全三维粘性流N-S方程求解,计算网格采用H-O-H型网格,即入口段、出口段采用H型网格,叶片区域采用O型网格。通过优化,总效率提高1.1%,总体性能提高,达到设计要求。     

远程多路视频信号无线传输采集系统设计

设计了一种远程多路视频信号传输采集系统,通过模拟信号远程无线传输的方式将摄像头获得的视频信息传输到监控计算机,由计算机上的图像采集卡进行采集,由监控软件进行多路信号的显示,该系统在多机器人系统中取得了良好的应用效果。     

某型航空发动机后支承动刚度的有限元计算

支承动刚度是影响发动机振动特性的主要因素之一,但目前航空发动机支承结构的刚度系数一般只能靠经验给出一个范围,这严重影响到转子动力特性计算结果的准确性。根据某型航空发动机的实际结构,建立发动机后支撑结构的动力学模型,应用有限元软件MSC.Nastran进行频率响应计算,再由所得位移曲线求出相应的动刚度曲线。本文所采用的计算方法和得到的结果对发动机转子动力特性的研究具有一定的参考价值。