Automotive-grade MEMS sensors used for general aviation

The attitude heading reference system (AHRS) provides data for primary flight instruments, head-up displays, autopilots, and moving map navigation systems. Advances in solid-state MEMS rate sensors, coupled with Kalman filter algorithms designed to mitigate high drift rates, provide the basis for low-cost, high-performance AHRS for general aviation. This paper describes the performance of a low cost, miniaturized AHRS using automotive-grade MEMS sensors. The performance of the system is detailed. The implications for certification of this class of system and fault tolerance are discussed.     

Microdosimetric measurements of heavy ion tracks.

The biological effectiveness of radiations depends on the spatial pattern of ionizations and excitations produced by the charged particle tracks involved. Ionizations produced by both the primary ion and by energetic delta rays may contribute to the production of biologically relevant damage and to the concentration of damage which may effect the probability of repair. Although average energy concentration (dose) can be calculated using homogeneous track models, the energy is actually concentrated in small volumes containing segments of the ion and delta ray tracks. These local concentrations are studied experimentally using low pressure proportional counters, and theoretically, using Monte Carlo methods. Small volumes near an ion track may be traversed by a delta ray. If they are, the energy deposited will be similar to that produced by a single electron track in a low-energy x-ray irradiation. The probability of a delta ray interaction occurring decreases with the square of the radial distance from the track. The average energy deposited is the product of this probability and the energy deposited in an interaction. Average energy deposited calculated from measured interaction probability is in good agreement with the results of homogeneous track models.     

罗-罗在A3XX发动机竞争中首战告捷

在Ａ３ＸＸ的发动机竞争中，英国罗－罗公司的遄达９００选用于新加坡航空公司订购的Ａ３ＸＸ     

Design for validation

An approach is outlined for the development of ultrareliable avionics for civil air transports using a design-for-validation philosophy that includes rigorous application of formal methods. The basic concept of the methodology is introduced, and the role of formal methods is explored. The impact of the design-for-validation philosophy on the system design process is then demonstrated by two simple examples. More details about the design-for-validation methodology are then given     

An experiment with an S-band radar using pulse compression andrange sidelobe suppression for meteorological measurements

A major technology barrier to the application of pulse compression for the meteorological functions required by a next generation ATC radar is range/time sidelobes which mask and corrupt observations of weak phenomena occurring near areas of strong extended meteorological scatterers. Techniques for suppressing range sidelobes are well known but without prior knowledge of the scattering medium's velocity distribution their performance degrades rapidly in the presence of Doppler. Recent investigations have presented a “doppler tolerant” range sidelobe suppression technique. The thrust of the work described herein is the extension of previous simulations to actual transmitted dispersed/coded waveforms using the S-band surveillance radar located at Rome Laboratory Surveillance Facility. The objectives of the experiment are: 1) to extend the verification of the simulation of the Doppler tolerant technique; and 2) to demonstrate that the radar transmitter, waveform generator, and receiver imperfections do not significantly degrade resolution, performance or reliability of meteorological spectral moment estimates     

First estimations of the aerosol optical thickness using Langley Method at Southern Brazil (29.4°S, 53.8°W)

The first estimations of the aerosol optical thickness (AOT) using Langley Method at Southern Space Observatory (SSO) at Southern Brazil (29.4°S, 53.8°W) are presented. In addition to ozone and sulphur dioxide columns, AOT can be obtained using Brewer Spectrophotometer at specific wavelengths: 306.3, 310.1, 313.5, 316.8 and 320.1 nm. The AOT was obtained for the period from November/2002 to May/2003. Very low AOT averages were obtained, whose values were about 0.21 ± 0.03 at 306.3 nm, 0.21 ± 0.02 at 310.1 nm, 0.19 ± 0.02 at 313.5 nm, 0.20 ± 0.02 at 316.8 nm and 0.20 ± 0.02 at 320.0 nm for all period analysed. Different behaviour of AOT were obtained at two daily specific periods of aerosol accumulation, one in the afternoons from November/2002 to February/2003, caused mainly by a mild biomass burning season’s in the region and other in the mornings from March to May/2003, due the high relative humidity presented in the region studied.     

Structure of the Venusian atmosphere from surface up to 100 km

The goal of this paper is to summarize the experimental data on the atmosphere of Venus obtained after 1985, when the VIRA (Venus International Reference Atmosphere) or COSPAR model was published. Among the most important results that have appeared since then are the following: measurements of the vertical temperature profile by the VEGA spacecraft with high precision and high altitude resolution; measurements made with balloons of the VEGA spacecraft; radio occultation measurements of Magellan, Venera-15, and Venera-16; and temperature profiles derived from the data of infrared spectrometry obtained by Venera-15. The new result as compared to VIRA is the creation of a model of the atmosphere in the altitude range 55 to 100 km dependent on local time. This model is presented in our paper in tabulated form.     

Solar and Heliospheric Modulation of Galactic Cosmic Rays

The significance of external influences on the environment of Earth and its atmosphere has become evident during recent years. Especially, on time scales of several hundred years, the cosmogenic isotope concentration during the Wolf-, Spoerer-, Maunder- and Dalton-Minimum indicates an increased cosmic ray flux. Because these grand minima of solar activity coincide with cold periods, a correlation of the Earth climate with the cosmic ray intensities is plausible. Any quantitative study of the effects of energetic particles on the atmosphere and environment of the Earth must address their transport to Earth and their interactions with the Earth’s atmosphere including their filtering by the terrestrial magnetosphere. The first problem is one of the fundamental problems in modern cosmic ray astrophysics, and corresponding studies began in the 1960s based on Parker’s cosmic ray modulation theory taking into account diffusion, convection, adiabatic deceleration, and (later) the drift of energetic particles in the global heliospheric magnetic field. It is well established that all of these processes determining the modulation of cosmic rays are depending on parameters that are varying with the solar magnetic cycle. Therefore, the galactic cosmic ray intensities close to Earth is the result of a complex modulation of the interstellar galactic spectrum within the heliosphere. The modern view of this cosmic ray modulation is summarized in our contribution.     

Monte Carlo transport model comparison with 1A GeV accelerated iron experiment: heavy-ion shielding evaluation of NASA space flight-crew foodstuff.

Deep-space manned flight as a reality depends on a viable solution to the radiation problem. Both acute and chronic radiation health threats are known to exist, with solar particle events as an example of the former and galactic cosmic rays (GCR) of the latter. In this experiment Iron ions of 1A GeV are used to simulate GCR and to determine the secondary radiation field created as the GCR-like particles interact with a thick target. A NASA prepared food pantry locker was subjected to the iron beam and the secondary fluence recorded. A modified version of the Monte Carlo heavy ion transport code developed by Zeitlin at LBNL is compared with experimental fluence. The foodstuff is modeled as mixed nuts as defined by the 71st edition of the Chemical Rubber Company (CRC) Handbook of Physics and Chemistry. The results indicate a good agreement between the experimental data and the model. The agreement between model and experiment is determined using a linear fit to ordered pairs of data. The intercept is forced to zero. The slope fit is 0.825 and the R2 value is 0.429 over the resolved fluence region. The removal of an outlier, Z=14, gives values of 0.888 and 0.705 for slope and R2 respectively.     

Measuring the matter distribution within z = 0.2 cluster lenses with XMM-Newton

We present an analysis of seven clusters observed by XMM-Newton as part of our survey of 17 most X-ray luminous clusters of galaxies at z  0.2 selected for a comprehensive and unbiased study of the mass distribution in massive clusters. Using the public software FTOOLS and XMMSAS we have set up an automated pipeline to reduce the EPIC MOS and pn spectro-imaging data, optimized for extended sources analysis. We also developped a code to perform intensive spectral and imaging analysis particularly focussing on proper background estimate and removal. XMM-Newton deep spectro-imaging of these clusters allowed us to fit a standard β-model to their gas emission profiles as well as a standard MEKAL emission model to their extracted spectra, and test their inferred characteristics against already calibrated relations.