Ambiguity Functions for Quadratic Phase-Coded Pulse Trains

The matched filter ambiguity function is presented for a burst waveform composed of repeated subbursts, each one of which consists of N pulses in which the phase is varied quadratically from pulse to pulse. The resulting ambiguity function exhibits small residual ambiguities along the delay axis separated by the reciprocal of the pulse repetition frequency (PRF). A cross-ambiguity function is derived which reduces these ambiguities to zero amplitude. A third cross-ambiguity function is presented for a receiver matched to a generalized Hamming weighted repeated quadratic burst. The location in the delay/Doppler plane of the waveform ambiguities for these waveforms is compared with that of an uncoded pulse burst.     

Real-time stereoscopic applications using the goes operational satellites

We have investigated the use of real and synthetic stereo satellite images and stereo graphics in applications such as cloud-tracked winds, severe storm cloud analysis, and general meteorological interpretation. We have concluded that a stereo meteorological presentation is possible and desirable in an operational environment. Synthetic stereo could be used immediately in cloud-tracked wind operations. The presentation allows one to appreciate the interrelations between cloud motions and cloud structures, especially in multi-layered situations. Reprocessing of FGGE tropical wind sets with a synthetic stereo presentation showed some improved yields of low-level vectors, a significant increase in mid-level vectors, and very little change in the high-level vectors. Severe local storm real-stereo presentations are possible operationally because the 15 minute RISOP operations of GOES-East allow simultaneous scanning of both geosynchronous satellites twice per hour. The real-stereo height measurements of overshooting turrets are an improvement over infrared heights and can be used to monitor the strength of the thunderstorm updraft. Synthetic stereo presentations of thunderstorm tops can be presented in a non-linear fashion which stretches out the cloud top features. The synthetic stereo presentation is easier for most people to see. We recommend the use of a hybrid system where the viewing is done on the synthetic stereo image and the quantitative measurements are done on the real-stereo pairs.     

The sensitivity of the earth's radiation budget to changes in cloudiness

Cloudiness modulates the radiation budget at the top of the Earth-atmosphere system. For radiation balance studies, for climate diagnostic studies, and for climate modeling studies, it is important to know the sensitivity of both the outgoing longwave radiation and the net (absorbed solar minus outgoing longwave) radiation of the system to changes in cloudiness on a global basis. Based on a 45 month series of NOAA satellite scanning radiometer observations, estimates of the global distribution of these sensitivity parameters are obtained.     

On the generation of satellite position (and velocity) by a mixed analytical-numerical procedure

The generation of accurate Earth-satellite ephemerides by numerical integration, over a period of perhaps weeks, can consume an inordinate amount of computer time. No satisfactory purely analytical procedure exists, but if short-period components of the standard elliptic elements are removed analytically, the resulting mean elements can be integrated with a step time that is longer than the satellite's orbital period.The definition of the mean elements depends on the particular perturbations included in the orbit generator and regarded as non-resonant. It is best if short-period perturbations are not applied to the orbital elements themselves but to the satellite's position (and velocity if required), expressed in a system of cylindrical polar coordinates, and the paper shows how mean elements can be recovered from position and velocity.A computer program has been written to test the proposed procedure for generating ephemerides, using a truncated potential field. Some results from this program are presented.     

Lightweight (AlGaAs)GaAs/CuInSe2 tandem junction solarcells for space applications

Mechanically stacked tandem cells consisting of GaAs thin-film upper cells and CuInSe₂ thin-film lower cells have been developed to meet the increasing power needs projected for future spacecraft. The authors report the fabrication of the first highly efficient lightweight GaAs/CuInSe₂ tandem cell on a 2-mil thick substrate, update recent performance improvements in thin-film GaAs/CuInSe₂ tandem cells, and discuss their application to space power systems. The efficiency of 4-cm² cells has improved to 21.6% AM0, the highest ever reported for a thin-film photovoltaic cell. Lightweight 4-cm² tandem cells have been successfully fabricated with efficiencies as high as 20.8%. These cells weighed about 180 mg without optimized substrate trimming. Radiation and operating temperature effects on GaAs/CuInSe₂ tandem cells are also discussed, and an interconnect scheme to form a voltage-matched string is described     

Simulation of DC spacecraft power systems

A modular state-variable approach is presented for DC spacecraft power system modeling and simulation. Each modular component is treated as a multiport network, and a state model is written with the port voltages as the inputs. The state model of a component is solved independently of the other components, using its state transition matrix. The state variables of each component are updated, assuming that the inputs are constant. Network analysis principles are then utilized to calculate the component inputs     

Determining rotation rates from light curves: RW Mon and RW Tau

We present light curve solutions for the non-synchronously rotating Algols RW Mon and RW Tau, and we illustrate how rotation rates are determined from light curves. We find RW Mon's primary component to spin at about 5 times the synchronous rate, which confirms the indication of fast rotation from reported emission line activity. RW Tau turns out to be only a mildly rapidly rotating Algol system, and our light curve solutions do not yield any firm value for the rotation rate of the primary component. It is suggested that continued efforts should be made to do good quality line broadening studies in order to find rotation rates for systems with only modest degrees of rapid rotation, and in order to further test photometric rotation rates against those of line broadening studies.     

LIPS III-a solar cell test bed in space

The LIPS III satellite, which was launched into a 1100-km circular orbit of 60° inclination in the spring of 1987, is discussed. LIPS III is a member of the living-plume-shield class of spacecraft, all of which were built around a simple sheet metal plume deflector. The purpose of LIPS III was to provide a testbed for space power sources. An overview of the LIPS III system is given, and the experiments submitted for it, all but one of which were photovoltaic in nature, are described     

PAVE PACE: system avionics for the 21st century

The PAVE PACE Initiative has been established to validate system avionics concepts for advanced military aircraft. The author presents the rationale of why the advanced architecture established by the PAVE PILLAR program should be continued under PAVE PACE to achieve: practical and affordable airborne versions of modular parallel processing network architectures for many applications currently beyond real-time implementation, readily available avionics for use in all avionics and, greatly improved techniques to reduce the cost of software development and support. An approach to the overall design structure for future avionics is also presented that entails: the use of CAD (computer-aided design) tools to assist in the development of system, hardware and software requirements, the use of replicated hardware modules (some at the wafer level), the use of reuseable software modules and the use of CAD tools to tailor hardware/software modules for specific application requirements. Continued use of the PAVE PILLAR high-speed data bus and operating system is recommended as the means to integrate and control the data input and output of physically and functionally separate parallel networks