Ring Current Energy Input and Decay

A new view of the ring current as an active element in the geospace system has emerged in which the ring current responds not only to changing convection electric fields imposed by solar wind interactions but to internal dynamics of the magnetosphere-ionosphere-atmosphere (geospace) system. Variations in the plasma sheet density, temperature and composition, saturation of the polar cap potential drop (and presumably the cross-tail potential drop), modifications to the imposed convection potential in the inner magnetosphere due to ring current shielding effects, the presence of a pre-existing ring current population, storm-substorm coupling, and strong convection with and without accompanying substorm activity all have an impact on the ring current strength, formation and loss. All of these internal processes imply that the geoeffectiveness of a solar wind driver cannot be predicted on the basis of the characteristics of the driver alone but must reflect key aspects of the dynamically changing geospace environment, itself. This review gives a summary of new information on ring current input and decay processes focusing on implications for the global geospace response to solar wind drivers during magnetic storms and on open questions that can be addressed with new ENA imaging techniques.     

Detection of long-duration narrowband processes

Detecting long, weak signals that are narrowband but of unknown frequency structure is an important signal processing challenge, with many applications in remote sensing and process monitoring. An ad hoc scheme is developed. Its stages include the discrete Fourier transform (DFT), a multiresolution decomposition in the frequency domain, and a generalized likelihood ratio test (GLRT). The computational load is light, and the performance is remarkably good. This is so not just in the original narrowband situation, but also, due to an inherent adaptivity to the data, in the detection of signals that are relatively broadband in nature. Generalizations are given to constant false alarm rate (CFAR) operation in both prewhitened and unwhitened cases, and to the detection of multiband signals. As regards the last, it is discovered that there is little loss from overestimating the number of bands     

Chemical Composition of Rocks and Soils at the Pathfinder Site

As Viking Landers did not measure rock compositions, Pathfinder (PF) data are the first in this respect. This review gives no proof yet whether the PF rocks are igneous or sedimentary, but for petrogenetic reasons they could be igneous. We suggest a model in which Mars is covered by about 50% basaltic and 50% andesitic igneous rocks. The soils are a mixture of the two with addition of Mg-sulfate and -chloride plus iron compounds possibly derived from the hematite deposits.     

Lithium micro-battery development at the Jet Propulsion Laboratory

Recent successes in the effort to miniaturize spacecraft components using MEMS technology, integrated passive components, and low power electronics have driven the need for very low power, low profile, low mass micro-power sources for micro/nanospacecraft applications. Recent work at JPL has focused upon developing thin film/micro-batteries compatible with temperature sensitive substrates. A process to prepare crystalline LiCoO₂ films with RF sputtering and moderate (<700°C) annealing temperature has been developed. Thin film batteries with cathode films prepared with this process have specific capacities approaching the practical limit for LiCoO₂, with acceptable rate capabilities and discharge voltage profiles. Solid-state micro-scale batteries have also been fabricated with feature sizes on the order of 50 microns     

Effects of bioreactor retention time on aerobic microbial decomposition of CELSS crop residues.

The focus of resource recovery research at the KSC-CELSS Breadboard Project has been the evaluation of microbiologically mediated biodegradation of crop residues by manipulation of bioreactor process and environmental variables. We will present results from over 3 years of studies that used laboratory- and breadboard-scale (8 and 120 L working volumes, respectively) aerobic, fed-batch, continuous stirred tank reactors (CSTR) for recovery of carbon and minerals from breadboard grown wheat and white potato residues. The paper will focus on the effects of a key process variable--bioreactor retention time--on response variables indicative of bioreactor performance. The goal is to determine the shortest retention time that is feasible for processing CELSS crop residues, thereby reducing bioreactor volume and weight requirements. Pushing the lower limits of bioreactor retention times will provide useful data for engineers who need to compare biological and physicochemical components. Bioreactor retention times were manipulated to range between 0.25 and 48 days. Results indicate that increases in retention time lead to a 4-fold increase in crop residue biodegradation, as measured by both dry weight losses and CO2 production. A similar overall trend was also observed for crop residue fiber (cellulose and hemicellulose), with a noticeable jump in cellulose degradation between the 5.3 day and 10.7 day retention times. Water-soluble organic compounds (measured as soluble TOC) were appreciably reduced by more than 4-fold at all retention times tested. Results from a study of even shorter retention times (down to 0.25 days), in progress, will also be presented.     

FEM code simulation of the magnetospheric proton fluxes

We report a study of the numeric solution to the diffusive transport equation for energetic protons magnetically trapped in the Earth's equatorial magnetosphere. The analysis takes into account the pertinent physical processes in this region, including deceleration of protons by Coulomb collisional interactions with free and bound electrons, the charge exchange process, cosmic ray albedo neutron decay source, and electric and magnetic radial diffusion. These results were obtained using the Finite Element Method with magnetic moment and geomagnetic L-shell as free variables. Steady state boundary conditions were imposed at L=1 as zero distribution function and at L=7 with proton distribution function extracted from ATS 6 satellite observations. The FEM-code yields unidirectional proton flux in the energy range of 0.1–1000 MeV at the equatorial top of the geomagnetic lines, and the results are found to be in satisfactorily agreement with the empirical NASA AP-8 model proton flux within the energy range of 0.5–100 MeV. Below 500 keV, the empirical AP-8 model proton fluxes are several orders of magnitude greater than those computed with the FEM-code at L<3. This discrepancy is difficult to explain by uncertainties of boundary spectrum parameters or transport coefficients.     

Optimization of moisture content for wheat seedling germination in a cellulose acetate medium for a space flight experiment.

The Porous Tube Plant Nutrient Delivery System (PTPNDS), a hydrophilic, microporous ceramic tube hydroponic system designed for microgravity, will be tested in a middeck locker of the Space Shuttle. The flight experiment will focus on hardware operation and assess its ability to support seed germination and early seedling growth in microgravity. The water controlling system of the PTPNDS hardware has been successfully tested during the parabolic flight of the KC-135. One challenge to the development of the space flight experiment was to devise a method of holding seeds to the cylindrical porous tube. The seed-holder must provide water and air to the seed, absorb water from the porous tube, withstand sterilization, provide a clear path for shoots and roots to emerge, and be composed of flight qualified materials. In preparation for the flight experiment, a wheat seed-holder has been designed that utilizes a cellulose acetate plug to facilitate imbibition and to hold the wheat seeds in contact with the porous tube in the correct orientation during the vibration of launch and the microgravity environment of orbit. Germination and growth studies with wheat at a range of temperatures showed that optimal moisture was 78% (by weight) in the cellulose acetate seed holders. These and other design considerations are discussed.     

Pilot error in automated systems shown by altitude deviationreports

Over 8,000 altitude deviations are reported to NASA's Aviation Safety Reporting System each year. This is almost one an hour. The narratives of pilot incidents relate how errors made in the automation-assisted altitude change task are caused by the difficulty pilots are having interacting with automatic systems. This paper discusses the impact of increased automation in glass-cockpit airliners on the altitude deviations reported by pilots. By observing the way information is processed by the cockpit system, the author suggests that the philosophies of design and training need to change in order to facilitate, not debilitate, the aircrew     

Uncertainty ellipses and their application to interval estimation of emitter position

A method of interval estimation of position of an object emitting electromagnetic energy is presented. The problem is considered in cases of known and unknown errors of emitter position determination. Precise expressions concerning two-dimensional confidence regions for unknown position of the emitter have been obtained. Uncertainty regions defined as error ellipses and confidence ellipses have been determined. Qualitative and quantitative comparison of considered regions have been made. The presented approach and obtained results may be useful in electronic intelligence (ELINT) and electronic warfare (EW) applications, in radio navigation, ballistics, and in rescue operations at sea as well.     

DNA double strand break production and rejoining in V79 cells irradiated with light ions.

Low energy protons and other densely ionizing light ions are known to have RBE>1 for cellular end points relevant for stochastic and deterministic effects. The occurrence of a close relationship between them and induction of DNA dsb is still a matter of debate. We studied the production of DNA dsb in V79 cells irradiated with low energy protons having LET values ranging from 11 to 31 keV/micrometer, i.e. in the energy range characteristic of the Bragg peak, using the sedimentation technique. We found that the initial yield of dsb is quite insensitive to proton LET and not significantly higher than that observed with X-rays, in agreement with recent data on V79 cells irradiated with alpha particles of various LET up to 120 keV/micrometer. By contrast, RBE for cell inactivation and for mutation induction rises with the proton LET. In experiments aimed at evaluating the rejoining of dsb after proton irradiation we found that the amount of dsb left unrepaired after 120 min incubation is higher for protons than for sparsely ionizing radiation. These results indicate that dsb are not homogeneous with respect to repair and give support to the hypothesis that increasing LET leads to an increase in the complexity of DNA lesions with a consequent decrease in their repairability.