Results from the ESA SREM monitors and comparison with existing radiation belt models

The Standard Radiation Environment Monitor (SREM) is a simple particle detector developed for wide application on ESA satellites. It measures high-energy protons and electrons of the space environment with a 20° angular resolution and limited spectral information. Of the ten SREMs that have been manufactured, four have so far flown. The first model on STRV-1c functioned well until an early spacecraft failure. The other three are on-board, the ESA spacecraft INTEGRAL, ROSETTA and PROBA-1. Another model is flying on GIOVE-B, launched in April 2008 with three L-2 science missions to follow: both Herschel and Planck in 2008, and GAIA in 2011). The diverse orbits of these spacecraft and the common calibration of the monitors provides a unique dataset covering a wide range of B-L* space, providing a direct comparison of the radiation levels in the belts at different locations, and the effects of geomagnetic shielding. Data from the PROBA/SREM and INTEGRAL/IREM are compared with existing radiation belt models.     

Light microscopic analysis of the gravireceptor in Xenopus larvae developed in hypogravity.

The paper describes an investigation of the influence of gravity on the early differentiation of gravity receptors in Xenopus embryos and larvae. There is evidence that the expression of crystals in the saccus endolymphaticus was statistically greater when the embryos developed in near weightlessness (hypogravity) than on earth. The function of these crystals is unknown but they may contribute to the functioning of the vestibular apparatus.     

Galactic cosmic ray transport methods: past, present, and future.

The development of the theory of high charge and energy (HZE) ion transport is reviewed. The basic solution behavior and approximation techniques will be described. An overview of the HZE transport codes currently available at the Langley Research Center will be given. The near term goal of the Langley program is to produce a complete set of one-dimensional transport codes. The ultimate goal is to produce a set of complete three-dimensional codes which have been validated in the laboratory and can be applied in the engineering design environment. Recent progress toward completing these goals is discussed.     

Oscillations of axial plant organs.

The tips of roots and shoots commonly show lateral movements as they grow forwards. These occur as both circumnutations (with long periods and large amplitudes) and micronutations (with short periods and small amplitudes). Their properties are reviewed, with emphasis on roots, and possible ways in which they could be regulated are discussed. The mechanisms could include long-range controls (for circumnutations) that depend on transmissible signals using steps common to gravitropism, and short-range controls (for micronutations) that operate within the elongation zone. The former are a property of the apex as a whole, while the latter may be confined to localized groups of cells. Simulation of nutations is presented with a view to isolating key physiological processes. However, this approach is limited by the current inadequate understanding of the growth mechanisms involved.     

A program to measure new energetic particle nuclear interaction cross sections.

The Transport Collaboration, consisting of researchers from institutions in France, Germany, Italy and the USA, has established a program to make new measurements of nuclear interaction cross sections for heavy projectiles (Z > or = 2) in targets of liquid H2, He and heavier materials. Such cross sections directly affect calculations of galactic and solar cosmic ray transport through matter and are needed for accurate radiation hazard assessment. To date, the collaboration has obtained data using the LBL Bevalac HISS facility with 20 projectiles from 4He to 58Ni in the energy range 393-910 MeV/nucleon. Preliminary results from the analysis of these data are presented here and compared to other measurements and to cross section prediction formulae.     

Models of CNS radiation damage during space flight.

The primary structural and functional arrangement of the different cell types within the CNS are reviewed. This was undertaken with a view to providing a better understanding of the complex interrelationships that may contribute to the pathogenesis of lesions in this tissue after exposure to ionizing radiation. The spectrum of possible CNS radiation-induced syndromes are discussed although not all have an immediate relevance to exposure during space flight. The specific characteristics of the lesions observed would appear to be dose related. Very high doses may produce an acute CNS syndrome that can cause death. Of the delayed lesions, selective coagulation necrosis of white matter and a later appearing vascular microangiopathy, have been reported in patients after cancer therapy doses. Lower doses, perhaps very low doses, may produce a delayed generalised CNS atrophy; this effect and the probability of the induction of CNS tumors could potentially have the greatest significance for space flight.     

Design study for a three-meter balloon-borne telescope for far infrared and submillimeter astronomy

A NASA supported design study is being carried out for a three-meter balloon-borne far infrared and submillimeter telescope. The goal of this project is to provide a facility for frequent flights for photometry, spectroscopy, and imaging in the spectral region 30 micrometers to 1 millimeter. It is intended to provide a scientific and technical step on the way to a large submillimeter telescope in space in the future. The study is concentrating on areas where technical advances are required: materials and fabrication techniques for lightweight primary mirrors, telescope and gondola structure, and pointing and stabilization. We are carrying out a design optimization and environmental test program of state-of-the-art carbon fiber reinforced plastic sandwich panels in collaboration with Dornier Systems. Similar efforts are being pursued for very lightweight molded glass mirrors. Innovative approaches to the telescope support and stabilization are being explored for achieving the required 1 arcsecond pointing stability.     

A sample collector for robotic sample return missions III: Impact survivability studies

Laboratory impact tests have been performed on experimental versions of a proposed robotic sample collector for extraterrestrial samples. The collector consists of a retractable aluminum ring containing an impregnable silicone compound that is pressed into the surface of the body to be sampled. As part of a comprehensive program to evaluate this idea, we have performed tests to determine if the samples embedded in the collector medium can survive the impact forces experienced during direct reentry, such as that of the recent Genesis sample return mission. For the present study, samples of sand, rock, glass, and chalk were subjected to decelerations of 1440–2880 g using drop tests. We found that even the most fragile samples, chosen to be representative of a wide range of the types of materials found on the surface of asteroids that have currently been studied, can withstand impacts of the intensity experienced by a sample return capsule during direct reentry.     

中东MRO市场:谨慎的乐观

尽管全球经济形势不断恶化,航空市场缩水,但中东地区丰富的石油资源和现金流,依然是航空维修业发展的沃土.中东各国政府、航空公司及其合作伙伴不惜花巨资开发和提升维修能力,成为飞机机体或发动机的维修中心.其中以迪拜的航空维修设施的发展最为抢眼.