Microwave Landing System

The National Microwave Landing Systems (MLS) program is a joint DOT/DOD/NASA effort to implement a common civil/military precision landing system to replace the current Instrument Landing System (ILS). The MLS will be capable of providing precision landing guidance down to Category III minimum while allowing for complex approach paths in both the horizontal and vertical planes. The system is based on the Time Reference Scanning Beam (TRSB) technique which was selected by the International Civil Aviation Organization (ICAO) in April 1978 as the new international landing system standard. MLS is less susceptible to interference from the surrounding area and provides a greater signal coverage area than ILS.     

A Major Step in Series Regulators

Power hybrid microelectronic design techniques have been developed to satisfy the requirements of 10-ampere 100-watt series voltage regulators. Application of these new techniques has resulted in a package occupying roughly the same volume as a TO-63 power transistor, yet containing two 30-ampere power transistors, selectable external components, and associated control circuitry.     

Confirmation of gravisensitivity in the slime mold physarum polycephalum under near weightlessness

We have investigated Physarum polycephalum, a unicellular organism with no special gravity receptors, on its ability to react to gravity. The first experiments were 0 g-simulation experiments on the fast-rotating clinostat conducted with plasmodial strands of this acellular slime mold. In these earth-bound experiments the observed parameters were periodicity of the contractions and dilatations of the strand's ectoplasm as well as the periodicity and velocity of the striking cytoplasmic (endoplasmic) shuttle streaming. During 0 g-simulation these parameters showed significant changes indicating the existence of a gravisensitivity of the slime mold.

The Space-Shuttle experiment (ESA-Biorack in D 1-Mission) should demonstrate the validity of the 0 g-simulation on the fast-rotating clinostat. The experiment was designed in a way enabling the registration of the same parameters as on the clinostat (using the light microscope in combination with a photo diode and a cinecamera). Only one of the two planned measurement sessions was fully successful and provided us with data confirming the results gained on the fast-rotating clinostat: The slime mold showed under real near weightlessness in the D 1-Space Shuttle Mission a transient frequency increase in its contraction rhythmicity and a (steady) increase in the streaming velocity of its endoplasm.     

MTI Processing and Weibull-Distributed Ground Clutter

It is shown that the Weibull-distributed ground clutter obeys a Weibull distribution after processing by the double canceler moving target indicator (MTI).     

Effects of prolonged exposure to space flight factors for 175 days on lettuce seeds

We have studied the effects of prolonged (up to 175 days) exposure of $\text{Lactuca sativa}$ seeds to space flight factors, including primary cosmic radiation heavy ions. The data obtained evidence a significant fourfold increase ofs pontaneous mutagenesis in seeds both with regard to the total number of aberrant cells as well as the formation of single cells with multiple aberrations. Comparison of the present experiment with earlier works shows that the frequency of such aberrations increases with the duration of the flight.     

The organic aerosols of Titan

A dark reddish organic solid, called tholin, is synthesized from simulated Titanian atmospheres by irradiation with high energy electrons in a plasma discharge. The visible reflection spectrum of this tholin is found to be similar to that of high altitude aerosols responsible for the albedo and reddish color of Titan. The real (n) and imaginary (k) parts of the complex refractive index of thin films of Titan tholin prepared by continuous D.C. discharge through a 0.9 N₂/0.1 CH₄ gas mixture at 0.2 mb is determined from x-ray to microwave frequencies. Values of n (1.65) and k (0.004 to 0.08) in the visible are consistent with deductions made by ground-based and spaceborne observations of Titan. Many infrared absorption features are present in k(λ), including the 4.6 μm nitrile band. Molecular analysis of the volatile component of this tholin was performed by sequential and non-sequential pyrolytic gas chromatography/mass spectrometry. More than one hundred organic compounds are released; tentative identifications include saturated and unsaturated aliphatic hydrocarbons, substituted polycyclic aromatics, nitriles, amines, pyrroles, pyrazines, pyridines, pyrimidines, and the purine, adenine. In addition, acid hydrolysis produces a racemic mixture of biological and non-biological amino acids. Many of these molecules are implicated in the origin of life on Earth, suggesting Titan as a contemporary laboratory environment for prebiological organic chemistry on a planetary scale.     

Flare build up: 21 May 1980

The decaying solar active region that crossed the central meridian on May 20, 1980 at latitude S13° produced a major flare (2B/X1) at 2054 on May 21. This region was a target of the international Flare Buildup Study and was well observed. The buildup was characterized by little flare activity during two days prior to the major flare but a great deal of activity in the filament that separated the opposite magnetic polarities of the active region. Large proper motions of sunspots and magnetic fields suggest that the magnetic field was stressed prior to the flare. The immediate trigger of the flare appears to have been an eruption of new magnetic flux in the center of the active region. The new flux erupted in a configuration that decreased the net flux of the active region and contributed to the decay of the region.     

Particle and Joule heating of the neutral polar thermosphere in cusp region using Atmosphere Explorer-C satellite measurements

Simultaneous measurements taken by instruments on the Atmosphere Explorer - C satellite were used to compare electron and proton particle energy deposition, Joule heating, and neutral density perturbations in the region of the cusp.Altitude profiles of Joule heating, electron energy deposition, and electron density are derived using measurements taken by the satellite as input to a computer model. Electric fields are calculated using ion drift measurements. Figures are presented for a representative orbital pass.A peak Joule heating rate of 0.059 Wm^?2 occurred in the cusp region with a peak of 0.025 Wm^?2 in the evening auroral electrojet. Peak volume heating rates corresponding to these regions were 1.4 × 10^?6Wm^?3 and 7.10^?7 Wm^?3, both occurring at an altitude of 115 km. Particle energy deposition was about an order of magnitude less than Joule heating. Large neutral density perturbations are related to regions of heating.     

Forces acting on a foreign particle near a solidification front

The interaction of inert foreign particles and a solid-liquid interface during solidification is considered. The viscous drag on the particle which produces a force on the interface is calculated under general assumptions as well as the disjoining force for small particles and the buoyancy force for large ones.