The Generation of Correlated Weibull Clutter for Signal Detection Problems

A method is discussed for generating Weibull vectors with a desired correlation matrix and specified parameters. Such vectors may represent samples of a correlated clutter signal. The presented method makes use of a suitable nonlinear transformation of random Gaussian vectors with correlated components. Computational aspects of the method are also discussed.     

Microprocessor-Controlled Digital Shunt Regulator

A new approach to the design of power systems is presented in which a microprocessor is used as a controller for a digital shunt regulator (DSR). This approach meets the demands of future space and ground missions, i. e., high efficiency, high reliability, low weight, low volume, increased flexibility, and less development time. This approach responds to future demands by permitting realtime modification of system parameters for system optimization. This feature is especially important in the event of an anomaly. As the microprocessor need not be dedicated to the DSR, it can simultaneously be used for battery management and for charge regulator/discharge regulator control. This approach also reduces the component count, simplifies assembly and testing of the unit, results in significant time saving, and increases the reliability.     

Problems in the analysis of gamma-ray burst spectra

Spectral measurements by the Solar Maximum Mission have been used to confirm the cyclotron lines in gamma-ray bursts reported from the Konus experiment. We present ISEE-3 data for the same burst (GB800419) during the same period of time which show no line. We discuss various problems in the analysis of scintillator spectra and point out that unfolded spectra are not necessarily unique and that the position of a data point in a deconvolved spectrum may vary depending on the assumed overall shape of the spectrum. As a result, if the analysis assumes a soft spectrum (such as optically thin thermal bremsstrahlung) an absorption feature might appear, whereas a harder spectrum (such as a Comptonized blackbody) would not require the feature. Since the continuum shape probably changes during the duration of a typical burst, the nonuniqueness of the spectral unfolding, combined with the assumption that the continuum is optically thin thermal bremsstrahlung, could give rise to spurious “absorption” features which vary on a time scale of seconds. Despite these problems, there is still some evidence for $\text{narrow}$ spectral lines in the range 45 to 65 keV but not for the broad lines reported from the Konus experiment. Unfortunately, the range 45 to 65 keV is the most difficult spectral region to unfold.     

Selected examples of profitable applications of remote sensing for resources inventories and monitoring

The Remote Sensing Centre of the Institute of Geodesy and Cartography in Warsaw has been operating since 1976. It has multi-disciplinary character; carries out scientific research, elaborates technologies of remote sensing investigations, applies remote sensing methods for solving various practical problems, coordinates national activities in this field, developes and disseminates remote sensing knowledge at both national and international levels offering various types of specialized training.The authors discuss the role of remote sensing investigations in the process of development planning. Examples of projects executed at the Remote Sensing Centre and concerning topographic and land use mapping, geological investigations, agricultural crop area determination, forest research, environmental monitoring and studies of climatic conditions in urban environment are described and extensively discussed in the paper. The authors emphasize these areas of the application of remote sensing and these interpretation techniques which are of potential interest for the developing countries.     

Probability of Anomaly Expressions for Random Waveform Registration

Registration by integral-square error correlation of one-dimensional discrete-time waveforms which are treated as random processes with specified autocorrelation functions is considered. An important design parameter for this class of problems is the probability of anomaly (a false dip in the correlation function) because it gives an indication of system immunity to gross registration errors. Explicit expressions for this parameter are not possible, so bounds and appoximations must be derived. Two upper bounds and an approximation for the probability of anomaly are derived here. The use of these expressions is illustrated by an example. The relative utility of these performance indicators is shown for the example by comparison with actual values of the probability of anomaly obtained by computer simulation.     

Enhanced resolution in simple radars

Many simple radars use fact-risetime pulses, but wide bandwidth does not translate into corresponding high resolution since the spectrum is far from flat. A scheme for enhancing down- and cross-range resolution of multiple targets through a two-step partial equalization of the spectrum is illustrated by detailed computer simulation, with emphasis on the tradeoffs between resolution and signal-to-noise ratios. Three examples are treated: two equal scattering centers, two unequal scattering centers, and compound target     

Lightweight (AlGaAs)GaAs/CuInSe2 tandem junction solarcells for space applications

Mechanically stacked tandem cells consisting of GaAs thin-film upper cells and CuInSe₂ thin-film lower cells have been developed to meet the increasing power needs projected for future spacecraft. The authors report the fabrication of the first highly efficient lightweight GaAs/CuInSe₂ tandem cell on a 2-mil thick substrate, update recent performance improvements in thin-film GaAs/CuInSe₂ tandem cells, and discuss their application to space power systems. The efficiency of 4-cm² cells has improved to 21.6% AM0, the highest ever reported for a thin-film photovoltaic cell. Lightweight 4-cm² tandem cells have been successfully fabricated with efficiencies as high as 20.8%. These cells weighed about 180 mg without optimized substrate trimming. Radiation and operating temperature effects on GaAs/CuInSe₂ tandem cells are also discussed, and an interconnect scheme to form a voltage-matched string is described     

Determining rotation rates from light curves: RW Mon and RW Tau

We present light curve solutions for the non-synchronously rotating Algols RW Mon and RW Tau, and we illustrate how rotation rates are determined from light curves. We find RW Mon's primary component to spin at about 5 times the synchronous rate, which confirms the indication of fast rotation from reported emission line activity. RW Tau turns out to be only a mildly rapidly rotating Algol system, and our light curve solutions do not yield any firm value for the rotation rate of the primary component. It is suggested that continued efforts should be made to do good quality line broadening studies in order to find rotation rates for systems with only modest degrees of rapid rotation, and in order to further test photometric rotation rates against those of line broadening studies.     

LIPS III-a solar cell test bed in space

The LIPS III satellite, which was launched into a 1100-km circular orbit of 60° inclination in the spring of 1987, is discussed. LIPS III is a member of the living-plume-shield class of spacecraft, all of which were built around a simple sheet metal plume deflector. The purpose of LIPS III was to provide a testbed for space power sources. An overview of the LIPS III system is given, and the experiments submitted for it, all but one of which were photovoltaic in nature, are described     

Incremental planning to control time-constrained blackboard-basedproblem solver [vehicle monitoring]

A planner that improves the control decisions made by a blackboard-based problem solver is described. This planner interleaves planning and execution. It sketches out major plan steps but incrementally details actions for only the next step since earlier actions influence how (and whether) to pursue a plan. The planner also reasons about time constraints, revising plans to meet problem-solving deadlines and deciding when it has done enough work on a problem. Implementation of these mechanisms is outlined, and experiments are discussed showing how they reduce overall computation and improve problem solving