Aerosols and clouds in the upper troposphere–lower stratosphere region detected by GOMOS and ACE: Intercomparison and analysis of the years 2004 and 2005

Satellite-based limb occultation measurements are well suited for the detection and mapping of polar stratospheric clouds (PSCs) and cirrus clouds. PSCs are of fundamental importance for the formation of the Antarctic ozone hole that occurs every year since the early 1980s in Southern Hemisphere spring. Despite progress in the observation, modeling and understanding of PSCs in recent years, there are still important questions which remain to be resolved, e.g. PSC microphysics, composition, formation mechanisms and long-term changes in occurrence. In addition, it has recently become clear that cirrus clouds significantly affect the global energy balance and climate, due to their influence on atmospheric thermal structure.     

Remote upgrading of a space-borne instrument

The main purposes of experiment “Obstanovka” (“Environment” in Russian) consisting of several instruments are to measure a set of electromagnetic and plasma phenomena characterizing the space weather conditions, and to evaluate how such a big and highly energy consuming body as the International Space Station disturbs the surrounding plasma, and how the station itself is charged due to the operation of so many instruments, solar batteries, life supporting devices, etc. Two identical Langmuir electrostatic probes are included in the experiment “Obstanovka”. In this paper the Langmuir probes for “Obstanovka” experiment are described, including the choice of geometry (spherical or cylindrical), a more reliable method for the sweep voltage generation, an adaptive algorithm for the probe’s operation. Special attention is paid to the possibility for remote upgrading of the instrument from the ground using the standard communication channels.     

Interstellar planetary protection

In the coming decades the detection of Earth-like extrasolar planets, either apparently lifeless or exhibiting spectral signatures of life, will encourage design studies for craft to visit them. These missions will require the elaboration of an interstellar planetary protection protocol. Given a specific dose required to sterilize microorganisms on a spacecraft, a critical mean velocity can be determined below which a craft becomes self-sterilizing. This velocity is calculated to be below velocities previously projected for interstellar missions, suggesting that an active sterilization protocol prior to launch might be required. Given uncertainties in the surface conditions of a destination extrasolar planet, particularly at microscopic scales, the potential for unknown biochemistries and biologies elsewhere, or the possible inoculation of a lifeless planet that is habitable, then both lander and orbiter interstellar missions should be completely free of all viable organisms, necessitating a planetary protection approach applied to orbiters and landers bound for star systems with unknown local conditions for habitability. I discuss the case of existing craft on interstellar trajectories – Pioneer 10, 11 and Voyager 1 and 2.     

Plasma transport across the heliopause

Existing heliopause models are critically rediscussed under the new aspect of possible plasma mixing between the solar wind and the ambient ionized component of the local interstellar medium (LISM). Based on current kinetic plasma theories, effective diffusion rates across the heliopause are evaluated for several models with turbulence caused by electrostatic or electromagnetic interactions that could be envisaged in this context. Some specific cases that may lead to high diffusion rates are investigated, especially in regard to their LISM magnetic field dependence.For weak fields (less than 10^–7 G), macroscopic hydrodynamic instabilities, such as of Rayleigh-Taylor or Kelvin-Helmholtz-types, can be excited. The resulting plasma mixing rates at the heliopause may amount to 20–30% of the impinging mass flow.Recently, an unconventional new approach to the problem for the case of tangential magnetic fields at the heliopause was published in which a continuous change of the plasma properties within an extended boundary layer is described by a complete set of two-fluid plasma equations including a hybrid MHD-formulation of wave-particle interaction effects. If a neutral sheet is assumed to exist within the boundary layer, the magnetic field direction is proven to be constant for a plane-parallel geometry. Considering the electric fields and currents in the layer, an interesting relationship between the field-reconnection probability and the electric conductivity can be derived, permitting a quantitative determination of either of these quantities.An actual value for the electrical conductivity is derived here on the basis of electron distribution functions given by a superposition of Maxwellians with different temperatures. Using two-stream instability theory and retaining only the most unstable modes, an exact solution for the density, velocity, and magnetic and electric fields can be obtained. The electrical conductivity is then shown to be six orders of magnitude lower than calculated by conventional formulas. Interestingly, this leads to an acceptable value of 0.1 for the reconnection coefficient.By analogy with the case of planetary magnetopauses, it is shown here for LISM magnetic fields of the order of 10^–6 G or larger that field reconnection processes may also play an important role for the plasma mixing at the heliopause. The resulting plasma mixing rate is estimated to amount to an average value of 10% of the incident mass flow. It is suggested here that the dependence of the cosmic-ray penetration into the heliosphere on the distribution of reconnecting areas at the heliopause may provide a means of deriving the strength and orientation of the LISM field.A series of observational implications for the expected plasma mixing at the heliopause is discussed in the last part of the paper. In particular, consequences are discussed for the generation of radio noise at the heliopause, for the penetration of LISM neutrals into the heliosphere, for the propagation of cosmic rays towards the inner part of the solar system and for convective electric field mergings into the heliosphere during the course of the solar cycle, depending on the solar cycle variations. With concern to a recent detection of electrostatic plasma waves by plasma receivers on Voyagers 1 and 2, we come to an interesting alternate explanation: the heliopause, rather than the heliospheric shock front, could be responsible for the generation of these waves.     

Simulation of Permanent Magnet Generator/Rectifier Combination

Permanent magnet generators are often used as the pilot exciters of three-stage generating units to provide an efficient and reliable source of electrical power. No external power supply is then necessary, and the problems associated with brushwear and with arcing at the rubbing contacts are eliminated. A technique is presented here by which the performance of a permanent magnet generator, when combined with a rectifier-fed d.c. load at its output terminals, may be accurately and efficiently computed. The machine model takes into account the magnetization characteristic of the permanent magnet rotor and involves only parameters which can be determined from terminal measurements on the machine at standstill. Both computed and measured characteristics for an experimental machine are presented, and a comparison of these characteristics shows that the model can predict accurately all the major characteristics of the machine, as well as its detailed internal performance, when supplying a typical resistiveinductive load.     

Tracking the Frequency Translation of a Sum of Orthogonal Sinusoids

The maximum likelihood approach is used to derive a method for estimating and tracking the frequency translation of a signal consisting of a sum of orthogonal sinusoids corrupted by additive white noise. The likelihood function is reduced to an equivalent statistic expressed in terms of the squared magnitude of the finite Fourier transform of the received signal. A function that generates an error signal for a frequency translation tracking loop is derived, and a method of generating the error signal using the discrete Fourier transform (DFT) of the received signal weighted by a linear ramp is suggested. Two noise-free examples are presented.     

Modeling Random Gyro Drift Rate by Data Dependent Systems

A new modeling procedure is presented in which a mathematical model for random gyro drift rate is obtained directly from the original observations without requiring any theoretical conjectures or preprocessing of the data. The adequate model so obtained confirms the presence of a random walk component causing the "steady state" drift and a stochastic component of the nature of correlated noise. It also provides a quantitative measure of the relative contribution of each component, useful in determining the quality of the gyro in guidance over extended periods.     

Signal-to-Noise Ratio of Arbitrary Power-Series Nonlinear Amplifier

A general analysis of the effect of an arbitrary power-series nonlinear amplifier followed by a coherent mixing device on signal-to-noise ratio (SNR) is performed. An expression is derived for the improvement factor which is defined as the logarithm of the ratio of the output SNR to the input SNR. This expression is applicable to the coherent amplitude detector and phase locked loop as well as noncoherent amplifier by appropriate selections of the detection angle. Moreover, the improvement factor can be obtained for noise with an arbitrary amplitude distribution. To demonstrate the applicability of this analysis, the improvement factors of the nonlinear amplifiers such as a power-law amplifier and a power-series amplifier with positive and negative discriminations are numerically calculated for the cases where the input noise amplitude distributions are Rician and triangular.     

Design of the HEAO Main Bus Shunt Regulator

The High Energy Astronomy Observatory (HEAO) main bus regulator contains a redundant error amplifier (REA) and a 12-section sequenced shunt transconductance amplifier (STA) in which not more than three and not less than one shunt section are in an active control mode regardless of a failure in any one of the twelve sections. The part of the work concerned with the shaping of the frequency response of the REA and STA minor feedback loops and of the teolator major feedback loop is described. Emphasis is on the application of a general design technique embodying a "design-analyze-measure iteration loop," in which a first-cut design and analysis is corrected ard improved after experimental observation of discrepancies and deficiencies. In particular, an incipient high-frequency oscillation was thereby reliably eliminated. It is demonstrated that analysis techniques involving a minimum of algebra can provide full quantitative information on an efficient and reliable system design.     

Microprocessor-Controlled Communications in an Advanced Instrument Landing System

The application of 4-bit microprocessors to the communication of the control and status signals found in an advanced aircraft instrument landing system is presented. The advantages as well as some of the peculiarities of such an approach are described. Among the benefits, one must include the possibility of a very convenient and understandable human interface.