Interplanetary acceleration of low-energy protons as observed during the 25 september 1978 shock event

ISEE-3 observations of a long-lasting low-energy proton intensity increase during the 25 September 1978 shock event are presented as an example for interplanetary particle acceleration in association with shock waves. The observations are discussed in the light of current models for particle acceleration. The particular shape of the time intensity behaviour of the particle intensity increase, the existence of a shock spike and the observed particle distributions indicate that the particles are accelerated at the shock by the induced electric field $\text{E}\text{= ?}\text{1}\text{c}\text{V}\text{×}\text{B}$.     

CCRS C/X-airborne synthetic aperture radar: An Rand D tool for the ERS-1 time frame

The airborne synthetic-aperture radar (SAR) system developed for the Canada Centre for Remote Sensing (CCRS) is described. It consists of two radars, at C-band and X-band. Each radar incorporates the following features: dual-channel receivers and dual-polarized antennas; a high quality, 7-look, real-time processor; a sensitivity time control for range-dependent gain control; a motion-compensation system for antenna steering in azimuth and elevation; and baseband I and Q signal phase rotation. The system also uses a high-power transmitter with a low-power back-up. The SAR maps to either side of the aircraft, at high or low resolution, at incidence angles which in high resolution span 0° to 80°. Radar operating parameters, data products, key specifications and the motion compensation scheme used are presented. Properties of the real-time imagery are discussed and examples of C-band SAR data in the three operating modes are given     

A review of long drop tubes as a supplement/alternative to space experiments

The 100 meter high drop tube at the Marshall Space Flight Center has proven to be a viable facility for studies of containerless solidification. Advantages are that experiments are inexpensive and large numbers of specimens can be processed rapidly. It would not be unusual to run ten specimens in a day. Another significant advantage is that the undercooling behavior can be followed with sufficient sensitivity to easily detect the onset of recalescence and subsequent events.Disadvantages are the restrictions on specimen sizes and types of alloys that can be run in a microgravity environment. Practical specimen sizes range between 50 mg and 500 mg depending on the type of furnace being used. Refractory alloys can be processed in a vacuum (about 10^?5 torr) and therefore at microgravity. Non-refractory alloys demand an atmosphere (about 200 torr) to obtain appreciable undercooling before impact at the bottom of the tube. Under these conditions significant g forces result.Because of the present limitations of the 100 meter drop tube, the most definitive work has been done on niobium based alloys. Large amounts of undercooling have been observed routinely and the effects of undercooling on microstructure have been characterized in detail. X-ray diffraction, scanning electron microscopy, and transmission electron microscopy have been used to determine types of phases, amounts of phases, and compositions of phases. It is clear, as would be expected, that the results bear some resemblance to rapid solidification processing by quenching. However, there are dissimilarities due to the uniqueness of solidification by deep undercooling without quenching in long drop tubes and accompanying recalescence effects.     

Earth benefits from space life sciences

Contributions of space exploration which are widely recognized are those dealing with the impact of space technology on public health and medical services in both urban and remote rural areas. Telecommunications, image enhancement, 3-dimensional image reconstructions, miniaturization, automation, and data analysis, have transformed the delivery of medical care and have brought about a new impetus to the field of biomedicine. Many areas of medical care and biological research have been affected. These include technological breakthroughs in such areas as: (1) diagnosis, treatment, and prevention of cardiovascular diseases, (2) new approaches to the understanding of osteoporosis, (3) early detection of genetic birth defects, (4) emergency medical care, and (5) treatment of chronic metabolic disorders. These are but a few examples where technology originally developed to support space medicine or space research has been applied to solving medical and health care delivery problems on Earth.     

IR-spectroscopy of ionosphere from stratospheric balloons

The radiation spectra of the ionosphere in the 4–5 μm region have been determined from stratospheric balloons by means of the specially elaborated method of the registration of angular and spectral distribution of the radiation. The radiation bands of 4.4 μm and 4.8 μm which have 0.1–0.2 erg cm^?2 sr^?1s^?1. brightness obtained in two flights, are identified with the vibration-rotation transitions of the ion NO⁺ (0 - 1) and the molecules N¹⁴N¹⁵ (0 - 1) and CO (0 - 1) and (3 - 2) from altitudes between 120 and 500 km.     

50–200 GV cosmic rays at various heliolatitudes

We consider regular motion of 50 – 200 GV particles in a large-scale interplanetary magnetic field model which contains a wavy neutral sheet responsible for the sector-structure. Numerical calculations based upon energy losses along various trajectories are carried out to obtain the predicted omni-directional density and anisotropy of cosmic rays at various solar latitudes. A marked difference is found between odd and even solar cycles. The post-1969 field configuration gives small radial and large latitudinal gradient: cosmic ray density increases toward the poles. The latitudinal gradient turns out smaller and of opposite sense for the pre-1969 epoch. Anisotropy changes dramatically as we move off the solar equator: corotation appears to be restricted to low latitudes.     

Simulation of Permanent Magnet Generator/Rectifier Combination

Permanent magnet generators are often used as the pilot exciters of three-stage generating units to provide an efficient and reliable source of electrical power. No external power supply is then necessary, and the problems associated with brushwear and with arcing at the rubbing contacts are eliminated. A technique is presented here by which the performance of a permanent magnet generator, when combined with a rectifier-fed d.c. load at its output terminals, may be accurately and efficiently computed. The machine model takes into account the magnetization characteristic of the permanent magnet rotor and involves only parameters which can be determined from terminal measurements on the machine at standstill. Both computed and measured characteristics for an experimental machine are presented, and a comparison of these characteristics shows that the model can predict accurately all the major characteristics of the machine, as well as its detailed internal performance, when supplying a typical resistiveinductive load.     

The astrophysical interest of EUV observations of extra-solar objects

The feasibility of observation of EUV sources is assessed. Many stars have been detected in the EUV range ( 100–1000); line fluxes from others can be predicted. Selected astrophysical problems are reviewed that can benefit from EUV spectroscopy. Included among them are the physics and dynamics of stellar coronae, confirmation of nuclear surface burning on cataclysmic variables, evolutionary properties of white dwarfs, the helium abundance in the interstellar medium, and spectroscopic signatures of neutrino oscillations.Proceedings of the Conference Solar Physics from Space, held at the Swiss Federal Institute of Technology Zurich (ETHZ), 11–14 November 1980.     

Application of remote sensing techniques in mineral resources survey — a case study pertaining to Singhbhum Shear Zone,Bihar, India

Geological analysis and evaluation of digitally processed and enhanced LANDSAT MSS data products for three test areas of Singhbhum Shear Zone, India has led to certain significant results regarding optimisation and utility of such techniques for geological studies and obtaining additional/new information regarding lithology and structure. Three band-to-band ratio images are found to give best results. Lithologic formations could be subdivided into a number of units. The Westward and southeastward extension of the shear zone could be delineated thereby indicating scope of mineralisation in these parts.     

Droplet vaporization in supercritical pressure environments

For most liquid-fueled combustion systems the behavior of the fuel as it is introduced to the combustion zone, often by spray injection, will have a significant impact on combustion. The subsequent combustion may be affected to a considerable degree by the initial spread of the liquid, break-up of larger fuel sheets and droplets into droplets of various sizes, droplet vaporization, and diffusion of gaseous fuel. Among the many factors which affect spray break-up and droplet vaporization are the environmental conditions into which the spray is introduced. For both diesel engines and rockets the environment pressure and temperature may be above the critical pressure and temperature of the injected fuel. In a compression-ignition internal combustion engine, the environment consists primarily of air, at pressures from 20 to 100 atmospheres and temperatures ranging from 900 to 1500 K. Even higher pressures are encountered in turbocharged diesels. A typical diesel reference fuel, dodecane, has a thermodynamic critical pressure of about 17 atmospheres, and a critical temperature of 600 K. Fuel is injected into a diesel engine environment in which ambient pressures exceed the critical pressure. While droplet temperatures are subcritical at first, they may rise to the critical temperature or higher.This paper will survey current understanding of supercritical pressure droplet vaporization. Specifically, the topics covered will include: liquid phase behavior; vapor phase behavior; thermodynamic and transport properties; droplet distribution and break-up; micro-explosions; and effects of microgravity.