Simultaneous measurements of sea surface temperature by GMS-1 and GMS-2

For accurate measurements of sea surface temperature in the 11 μm window region, it is necessary to eliminate the effect of atmospheric absorption. A technique using observations from different angles is one of the methods of eliminating this atmospheric effect. This technique is not possible at present, using a single satellite; but using two geosynchronous satellites, it is possible to observe a common area from two different elevation angles. To correct for atmospheric effects, therefore, we compared the infrared data obtained from observations at about the same time (less than a minute apart) on the equator using the GMS-1 and GMS-2 satellites which had about 20° longitudinal separation. It was found that if the infrared spectral wavelength channel of one geosynchronous satellite is selected to be different from that of the other, it is possible to improve the two-satellite observation technique of estimating water vapor content in a tropical atmosphere. This technique corresponds to split window measurements by the AVHRR radiometer on board the NOAA-7 satellite.     

An instrument for DC electric field and AC electric and magnetic field measurements aboard ‘Intercosmos-Bulgaria-1300’ satellite

The instrument IESP-IPMP represents the complex unit measuring the vector of the DC electric field, the vectors of the electric and magnetic field in the frequency range of 0.2 – 6.5 Hz (wave form), autocorrelation functions of waves with frequencies of 0.1 – 5 kHz, and wave amplitudes in 8 bandpass channels. Some results are shown and compared in the various frequency ranges.     

Capillary brazing under microgravity (TEXUS-II) and 1g conditions

Experiments of vacuum brazing under both microgravity and 1-g conditions show the effect of hydrostatic pressure on ga-filling. The absence of buoyancy forces under microgravity affects the microstructure of the solidified braze in the joint.     

Notes on SCPC-FM System Design and Performance

In many domestic satellite communication systems single-channel per-carrier FM (SCPC-FM) has become the accepted transmission method for thin route communication. The SCPC-FM modem operates over a wide range of carrier frequencies and is designed to use satellite power and bandwidth efficiently. It incorporates elements which make the signal transfer complex, so the system behavior is not immediately obvious. This article investigates the signal processes and analyzes the performance of a companded and preemphasized SCPC-FM system and it furnishes insight into the choice of crucial system parameters.     

Quadrature Sampling with High Dynamic Range

Many radio and sonar systems require signal outputs in complex low-pass form. To achieve this, it is possible to use uniform sampling of the bandpass signal, together with computation of the quadrature component by way of a Hilbert transform. The bandpass to low-pass translation is accomplished by undersampling. A hardware implementation is described which achieves 70 dB spurious-free dynamic range and a bandwidth of 30 kHz.     

Exploration of the solar corona by high resolution solar decametric observations

In this review, current state of knowledge of high resolution observations at decameter wavelengths of the quiet Sun, the slowly varying component (SVC), type I to V bursts and noise storms is summarized. These observations have been interpreted to yield important physical parameters of the solar corona and the dynamical processes around 2R from the photosphere where transition from closed to open field lines takes places and the solar wind builds up. The decametric noise bursts have been classified into (i) BF type bursts which show variation of intensity with frequency and time and (ii) decametric type III bursts. The angular sizes of noise storm sources taking into account refraction and scattering effects are discussed. An attempt has been made to give phenomenology of all the known varieties of decametric bursts in this review. Available polarization information of decametric continuum and bursts has been summarized. Recent simultaneous satellite and ground-based observations of decametric solar bursts show that their intensities are deeply modulated by scintillations in the Earth's ionosphere. Salient features of various models and theories of the metric and decametric noise storms proposed so far are examined and a more satisfactory model is suggested which explains the BF type bursts as well as conventional noise storm bursts at decametric wavelengths invoking induced scattering process for 1 t conversion. Some suggestions for further solar decametric studies from the ground-based and satellite-borne experiments have been made.     

Absolute IR-spectra from the measurement of Fourier-spectrometers aboard Meteor 25 and 28

It is well known that temperature- and watervapour-profiles, ozone concentration, other atmospheric constituents and the surface-radiation of the Earth can be determined by remote sensing in the IR radiation range with the aid of a satellite.

The narrow-band radiation measurements for remote sensing of the atmosphere and the Earth-surface can be realized either by various radiometers working in selected frequency channels or, continuously in a given frequency range, by spectrometers with fixed spectral resolution.

Fourier-spectrometers (FS) have been used in Earth-orbit only four times up to now: Nimbus 3, Nimbus 4, Meteor 25 and Meteor 28.

The most important technical parameters, the working regime and some aspects of date processing of the FSs working aboard of Meteor 25 and Meteor 28 are given. For the determination of calibrated absolute spectra a method is used that is based on the experience of the first experiment and on the long time stability of the spectrometers. The results obtained in laboratory calibration tests and in the orbit are described.     

Maximum Theoretical Angular Accuracy of Planar and Linear Arrays of Sensors

A study has been made of the maximum theoretical accuracy in the angular location of a radiating object that is achievable by using a planar or linear array. The elements are assumed to have identical radiation patterns and the complex voltages observed at their ports are assumed to be subject to phase measurement errors, having normal probability density. An optimum scheme for the statistical extraction of the parameters defining the direction is established. It consists of combining the observed phases linearly with weights depending upon the element locations. It is shown that the presence of thermal noise, for sufficiently high signal-to-noise ratio, does not change the structure of the estimator. Comparison with conventional multiple interferometric techniques indicates the superiority of the proposed scheme. Finally, a limited numerical study on a small linear array vertically located on a reflecting terrain is performed. Although in such a situation the scheme proposed is not the theoretical optimum, it leads to errors that, for most directions of the target, are smaller than those found for the same array when using conventional multiple interferometer techniques.