Features of mass supply and flows related with reconnection in the solar corona

Symmetrical broadening in the emission spectral lines is the ultimate observational effect of magnetic reconnection in the solar corona. Reconnection can create plasmas of very different temperatures and, hence, very different electrical conductivities in the corona. The electrodynamical effect of such a mass supply is considered. Electromagnetic expulsion force, different from Parker's well-known magnetic buoyancy force, can effectively balance gravity in prominences and generate fast vortex flows in the vicinity of fine threads inside prominences. The possibility of observing this effect from SOHO is discussed.     

Battery charger design for the Columbus MTFF power system

A novel pulsewidth-modulated (PWM) dc-dc converter topology is proposed for the battery charge regulator (BCR) of the Columbus Man-Tended Free-Flyer (MTFF) power system. The system is a regulated bus system. Bus voltage control is implemented at the input of the BCR. The use of a conventional buck topology with PWM conductance control at the input results in a second-order behavior. A study of new PWM dc-dc converter topologies has been made to attain a suitable topology. The proposed converter topology is designed and a breadboard including the control loop has been built and tested. The experimental results show that the converter operates according to the design constraints.     

A two-dimensional position-sensitive spectroscopic proportional counter for balloon-borne hard X-ray astronomy

A new design of position sensitive spectroscopic proportional counter is described, for use in a balloon borne hard x-ray telescope. Initial position and spectral resolution data from a one-dimensional laboratory prototype are reported. With this device, the final telescope will have an angular resolution of better than 10 minutes of arc.     

Investigation of natural and artificial stimulation of the ionospheric Alfvén resonator at high latitude

A brief review is provided of recent progress in understanding the ionospheric Alfvén resonator (IAR) at high latitude. Firstly, naturally occurring resonances of the IAR as detected by pulsation magnetometers in the auroral zone at Sodankylä and in the polar cap at Barentsburg are considered. The characteristics of the IAR in the two regions are broadly similar, although the effects of solar illumination are less clear at the higher latitudes. Secondly we review recent attempts to stimulate the IAR through high-power radio frequency experiments both in the auroral zone at Tromsø with the European Incoherent SCATter (EISCAT) heater, and within the polar cap at Longyearbyen with the Space Plasma Exploration by Active Radar (SPEAR) facility. In the auroral zone at, Tromsø the stimulated IAR has been observed by ground-based magnetometers, and through electron acceleration observed on the FAST spacecraft. At SPEAR in the polar cap, the stimulated IAR has been investigated, with ground magnetometers, with the first results indicative of a positive detection.     

Experimental investigations of the 10 N catalytic hydrazine thruster

Experimental investigations of the 10 N catalytic hydrazine thruster are reported. These thrusters find applications in orbit raising functions of a spacecraft. The hardware was realized and tested in a vacuum chamber (10^?3 mbar vacuum) for its performance. When tested at the design propellant supply pressure of 21.5 bar the thruster developed 10.25 N thrust at an operating chamber pressure of 16.4 bar. The thruster was also tested for off-design conditions (24, 18 and 14.5 bar propellant supply pressures) of operation to determine the steady-state performance. The chamber pressure and vacuum thrust follow more or less a linear law with the propellant-supply pressure. The thruster was also tested for its response characteristics for short (100 ms) firing durations at various propellant-supply pressures (15.5, 18.8, 22.5, 25.6 and 29.5 bar) and the experimental results are reported and discussed. The hydrazine was injected at the room temperature (300^±5 K).     

RF communications subsystem for the Radiation Belt Storm Probes mission

The NASA Radiation Belt Storm Probes (RBSP) mission, currently in Phase B, is a two-spacecraft, Earth-orbiting mission, which will launch in 2012. The spacecraft's S-band radio frequency (RF) telecommunications subsystem has three primary functions: provide spacecraft command capability, provide spacecraft telemetry and science data return, and provide accurate Doppler data for navigation. The primary communications link to the ground is via the Johns Hopkins University Applied Physics Laboratory's (JHU/APL) 18 m dish, with secondary links to the NASA 13 m Ground Network and the Tracking and Data Relay Spacecraft System (TDRSS) in single-access mode. The on-board RF subsystem features the APL-built coherent transceiver and in-house builds of a solid-state power amplifier and conical bifilar helix broad-beam antennas. The coherent transceiver provides coherency digitally, and controls the downlink data rate and encoding within its field-programmable gate array (FPGA). The transceiver also provides a critical command decoder (CCD) function, which is used to protect against box-level upsets in the C&DH subsystem. Because RBSP is a spin-stabilized mission, the antennas must be symmetric about the spin axis. Two broad-beam antennas point along both ends of the spin axis, providing communication coverage from boresight to 70°. An RF splitter excites both antennas; therefore, the mission is designed such that no communications are required close to 90° from the spin axis due to the interferometer effect from the two antennas. To maximize the total downlink volume from the spacecraft, the CCSDS File Delivery Protocol (CFDP) has been baselined for the RBSP mission. During real-time ground contacts with the APL ground station, downlinked files are checked for errors. Handshaking between flight and ground CFDP software results in requests to retransmit only the file fragments lost due to dropouts. This allows minimization of RF link margins, thereby maximizing data rate and thus data volume.     

Hardware-in-the-loop testing technology for integrated control and condition monitoring systems of aircraft gas turbine engines

Hardware-in-the-loop testing technology for automatic control, condition monitoring and diagnostics systems of gas turbine engines is described. The technology proposed makes it possible to simulate combinations and chains of unexpected and gradual failures of engines, transducers and actuators.     

Algorithmic support of a small-sized navigation system on the basis of the magnetoinertial course transmitter

The algorithmic support of a small-sized navigation system on the basis of the magnetoinertial course transmitter is considered; the support makes it possible to significantly reduce accumulating errors that are due to incomplete data on wind parameters and decrease requirements for random errors of initial data sensors.     

A set of systems for labor standards computer-aided design

A set of systems for labor standard computer-aided design is described, namely, initial developments, advance and state-of-the art.     

A combined turbulent combustion model in studying a lean flameout process

A modification of the Zimont turbulent combustion model is presented; the modification makes it possible to describe processes in diffusion and homogeneous flame fronts as well as to take into account the influence of different factors that cause flame destabilization. The model is based on the equation for a reaction completeness extent (completeness of combustion). The model realization to simulate the premixed combustion is described and the modification of the turbulent combustion model is applied to simulate a process of flameout downstream of the flameholder.