Profiling of flow passage in axial radial-flow compressor impellers

A procedure of calculating an axial radial-flow centrifugal stage is considered. Using the gas-dynamically expedient load ratio distribution in profile, the process of impeller flow passage profiling is described. Also given are some techniques for decreasing or eliminating a wake zone as well as a graph of loss dependence on the divergence factor and velocity deceleration on the rarefaction side of the blade channel at the impeller outlet.     

A boundary value problem of aerohydrodynamics in designing an axisymmetric body with jet blowout

A numerical and analytical method for constructing a shape of the axisymmetric body streamlined with jet blowout by the specified velocity distribution along its meridian section is proposed. The foundation of the method is the iteration process based on the solutions of an inverse problem in the plane case and a primal problem for the axisymmetric body. A program realizing the iteration process is set up and examples of numerical calculations are given.     

Calculation of decoupling zeroes in the multiconnected dynamic system

A recursive method for calculating decoupling zeroes in the linear multiconnected dynamic system based on the application of matrix canonization techniques is proposed. Its essence is that the problem dimension is successively decreased and reduced to finding eigenvalues of some matrix. The results obtained can be used to check controllability and observability as well as to calculate uncontrollable and unobservable modes of the dynamic system.     

Mathematical modeling and experimental investigations of oxygen-methane fuel combustion at coaxial-jet supply into the combustion chamber of liquid-propellant rocket engine

The numerical results are presented for the case of coaxial-jet supply at the different ratio of mass component velocities at the combustion chamber inlet with the constant and variable relationship of oxygen-methane components. The experimental investigations of coaxial-jet mixing elements as part of the model setup chamber operating on corrosive producer gas and gaseous methane were carried out. A qualitative pattern of the $ \overline {\rho u} $ \overline {\rho u} parameter influence on the chamber economic feasibility was obtained: as $ \overline {\rho u} $ \overline {\rho u} decreases, the combustion efficiency coefficient grows.     

Potentialities of theoretical and experimental prediction of Life Support Systems reliability.

To develop and design Life Support Systems it is necessary to evaluate their reliability. However direct experiments take much time, are very expensive, and therefore are practically impossible. Promising way is to use approximate estimates of reliability, which need essentially fewer amounts of experimental data. Two types of estimates of Life Support System reliability--additive and multiplicative ones are considered in the paper. Additive estimate is based on the assumption that total system failure probability is low and therefore it can be considered as the sum of failure probability of separate units. Additive approach allows obtaining near lower-bounded estimate of failure probability. Multiplicative estimate allows evaluating the possibility of system catastrophe due to simultaneous effect of several factors when each of them separately is not dangerous. Evaluation shows that the possible error of reliability forecast increases with the increasing of number of external factors faster than exponential function. An illustration of the ecological similarity approach as promising tool for providing estimation of full-scale system reliability by means the set of small similar experimental models.     

Automatic Light Control Electro-Optical CCDTV Systems

For electro-optical TV systems, a simplified method of analysis has been developed for an automatic light control (ALC) loop preliminary ary design and performance trade-offs. With iris and shutter control mechanization incorporated, not only does the input light range increase, but the video response overshoot and settling time are reduced as well. This study shows that the appealing notion of heavily damped response is not often true, particularly in the realtime ime airto-ground surveillance of targets with varying backgrounds. In addition, with exponential and geometric feedback functions introduced, the resultant ALC dynamics are independent of the input light level. To verify the assumptions made and to demonstrate the feasibility of a working model, a complete system simulation is performed.     

Analysis of a spacecraft life support system for a Mars mission

This report summarizes a trade study conducted as part of the Fall 2002 semester Spacecraft Life Support System Design course (ASEN 5116) in the Aerospace Engineering Sciences Department at the University of Colorado. It presents an analysis of current life support system technologies and a preliminary design of an integrated system for supporting humans during transit to and on the surface of the planet Mars. This effort was based on the NASA Design Reference Mission (DRM) for the human exploration of Mars [NASA Design Reference Mission (DRM) for Mars, Addendum 3.0, from the world wide web: http://exploration.jsc.nasa.gov/marsref/contents.html.]. The integrated design was broken into four subsystems: Water Management, Atmosphere Management, Waste Processing, and Food Supply. The process started with the derivation of top-level requirements from the DRM. Additional system and subsystem level assumptions were added where clarification was needed. Candidate technologies were identified and characterized based on performance factors. Trade studies were then conducted for each subsystem. The resulting technologies were integrated into an overall design solution using mass flow relationships. The system level trade study yielded two different configurations--one for the transit to Mars and another for the surface habitat, which included in situ resource utilization. Equivalent System Mass analyses were used to compare each design against an open-loop (non-regenerable) baseline system.     

Some aspects of psychophysiological support of crewmember's performance reliability in space flight

Crewmembers play an important role in ensuring the efficiency of "crew-spacecraft" system. However, despite of the fact that crewmembers are well trained and highly motivated persons, extreme flight factors may influence negatively on their reliability, and lead to human error occurrence. Therefore, working out methods of human error prevention is very significant to increase crewmember's performance reliability. Human error can occur in the operation of systems for a number of reasons. Within the framework of the present investigation, with use the data collected during "Mir" station missions, the significant (p<0.05) positive correlation of crewmembers errors (CE) frequency with their psychophysiological state (PPS), and work and rest schedule (WRS) intensity has been revealed. Differently, the higher WRS intensity, the crewmember's PPS is worse, and CE frequency is higher. This finding has been based on substantiations of the approach to human reliability management. Its essence will consist of the following: reducing WRS intensity, we thus can improve a crewmember's PPS and, accordingly, reduce CE frequency. This approach is discussed in the paper.     

Fractal analysis of short and intermediate GRB and the fireball model

In the present work the possibility of the fractal analysis application for GRB temporal profiles was studied. We have analysed the 4B revised BATSE catalog: temporal profiles of GRB with t₉₀ < 3 s (287 short and 100 intermediate) were studied on TTE data, a sample of 278 intermediate GRB with t₉₀  3 s were studied on DISCSC data. An analysis of the background fractal dimension distributions obtained using TTE and DISCSC data (143 and 110 background regions, respectively), indicates that for both datasets background fractal dimensions D_bgr = 1.5 that the fractal dimension distributions obtained by using these data can be processed simultaneously. The change of the fractal index D_bgr for Poisson statistics – dominated sets with different coefficients of error in counting (up to 10) was studied and D_bgr = 1.5. The ranges of fractal dimension (0.80  D  2.25 for short and 0.85  D  2.01 for intermediate GRB) are shifted over range for theoretical fractal curve (1 < D < 2) due to the finite detector time resolution. There are four subgroups in fractal dimension distribution for short GRB (D = 1.05 ± 0.03, D = 1.31 ± 0.05, D = 1.51 ± 0.04, D = 1.90 ± 0.03) and six subgroups for intermediate one (D = 1.05 ± 0.09, D = 1.24 ± 0.08, D = 1.44 ± 0.07, D = 1.51 ± 0.08, D = 1.64 ± 0.07, D = 1.91 ± 0.1). Time profiles with fractal dimension smaller then background can be obtained by using models with many short chaotic processes in sources, for example, fireball model with shock waves. The range of fractal dimensions for the modelled temporal profiles is 1.213  D  1.400, which can correspond to subgroups of short and intermediate GRB with D = 1.31 and D = 1.24; moreover, the fractal dimension of a simulated indented event and GRB990208 are equal within the error limits for some model parameters and it is possible to obtain smooth temporal profiles with D = D_bgr.