New instrumentation for optical measuring of oxygen in gas or dissolved in liquids.

The optical oxygen sensor is a novel device for the determination of oxygen in gases or dissolved in liquids. It is based on the measurement principle of fluorescence quenching, which is completely different from that of polarographic oxygen sensors (today the most widespread devices of oxygen detection). The new instrument offers features and advantages, which render it not only a realistic alternative, but, for specific applications, make it superior to existing electrochemical methods. The system is based on low-cost semiconductor devices (light-emitting diodes, photodiodes, low-cost analogue and digital components) and new LED-compatible oxygen-sensitive membranes. The flow cell of the instrument may be thermostatted and the sensor can be calibrated by a simple two-point calibration procedure. The optical oxygen sensor is particularly suitable for measuring dissolved oxygen in respirometry, since no oxygen is consumed by the device and the signal is independent of sample flowrate or stirring speed. Typical fields of application are monitoring of oxygen in ground and drinking water, in process control in bioreactors and in breath gas and blood gas analysis.     

Nanotechnology-based molecular test equipment (MTE)

This paper describes original research efforts in the design, simulation, and development of nanotechnology-based molecular test equipment (MTE). This is a research effort for testing printed circuit boards independent of traditional automatic test equipment (ATE) through the fabrication of MTE within integrated circuits (ICs). The MTE is embedded within the IC substrate and encapsulated within nanoprobes that connect between the surface and the substrate of the IC at various functional areas. A process is followed whereby IC device simulation is performed to assess the electrical, chemical, and structural properties of integrated and adjacent substrate devices. Through this approach the nominal and failed device performance parameters of interest to substrate-based MTE are found. Discussion of the development and application of MTE within IC architectures is provided, including such topics as the effect of substrate composition on the design and realization of MTE, interfaces between MTE and IC devices, and reporting of MTE results to the IC surface and technician. Potential application areas within different device functions will also be identified. A chemical structure diagram is also provided to illustrate the implementation of MTE using discrete device configurations with MTE-augmented logic     

Chromosome instability of HPRT-mutant subclones induced by ionising radiation of various LET.

The induction of HPRT-mutations and survival of Chinese hamster cells (line B11ii-FAF28, clone 431) were studied after irradiation by 4He and 12C-ions of various LET (20-360 keV/micrometers), produced by the U-200 heavy ion accelerator. The RBE increases with LET up to the maximum at 100-200 keV/micrometers and then decreases. Cytogenetic analysis was performed on the HPRT-mutant subclones selected from unirradiated Chinese hamster V-79 cells and from HPRT-mutant subclones that arose after exposure to gamma-rays, 1 GeV protons and 14N-ions (LET-77 keV/micrometers), produced by the synchrophasotron and the U-400M heavy ion accelerator. Slow growing mutant subclones were observed. The cytogenetic properties of individual clones were highly heterogeneous and chromosome instability was observed in both spontaneous and radiation-induced mutants. Chromosome instability was highest among spontaneous mutants and decreased with increasing LET.     

Controlled solar sail transfers into the near-sun orbits

We present results of numerical simulations of trajectories of a space probe with a flat solar sail which moves from a circular Earth orbit to near-Sun regions. We consider the upper limit of the sail temperature as the basic restriction. We also examine the planar (ecliptic) solar sail transfer with gravity-assist flybys around planets.     

Distributed flight control system using fiber distributed datainterface (FDDI)

The design of fault-tolerant distributed control systems is discussed. The application described is a generic flight control system (FCS) for a fighter aircraft. The system is designed for high redundancy and expandability to meet various requirements. The communication network is based on the fiber distributed data interface (FDDI), which provides a high level of electromagnetic interference resistance and reliability. The choice of fiber optic media also provides an extremely high bandwidth and tremendous growth capability for future communications needs. This study is not specific to FDDI or flight control systems. The methods and configurations presented should be applicable to many real-time control implementations     

Investigation of promising ceramic materials in discharge chambers of stationary plasma thrusters

The characteristics of the insulator wear process in the discharge chamber of a stationary plasma thruster (SPT) are analyzed. The results of studying the erosion resistance to ionic spraying of different ceramic compositions are presented. It is shown experimentally that the integral characteristics (the value of thrust and thrust efficiency) as well as the SPT lifetime can be improved in changing from the conventional hot-pressed boron silicate (BN + SiO₂) ceramics to the BN + Si₃N₄ ceramic compositions.     

Advanced lithium ion battery charger

A lithium ion battery charger has been developed for four and eight cell batteries or multiples thereof. This charger has the advantage over those using commercial lithium ion charging chips in that the individual cells are allowed to be taper charged at their upper charging voltage rather than be cutoff when all cells of the string have reached the upper charging voltage limit. Since 30-60% of the capacity of lithium ion cells may be restored during the taper charge, this charger has a distinct benefit of fully charging lithium ion batteries by restoring all of the available capacity to all of its cells     

Biogeochemical evidence of microbial activity on Mars.

We suggest a new interpretation of the data on so-called SNC meteorites and delta 13C values of the calcium carbonate minerals and organic matter discovered in them. The delta 13C value of calcite (up to 15 ppt) is accounted for by the microbial reaction CO2 + H2 ---> CH4 + H2O. Methane-forming bacteria also synthesize organic carbon (in the form of biomass) from CO2, and this process is accompanied by 12C fractionation. Therefore, the organic carbon of SNC meteorites is enriched with 12C (delta 13C as low as -35 ppt). The environmental conditions under which the calcite of SNC meteorites was formed were favorable for the activity of methanogens.     

Microgravity effects on water supply and substrate properties in porous matrix root support systems.

The control of water content and water movement in granular substrate-based plant root systems in microgravity is a complex problem. Improper water and oxygen delivery to plant roots has delayed studies of the effects of microgravity on plant development and the use of plants in physical and mental life support systems. Our international effort (USA, Russia and Bulgaria) has upgraded the plant growth facilities on the Mir Orbital Station (OS) and used them to study the full life cycle of plants. The Bulgarian-Russian-developed Svet Space Greenhouse (SG) system was upgraded on the Mir OS in 1996. The US developed Gas Exchange Measurement System (GEMS) greatly extends the range of environmental parameters monitored. The Svet-GEMS complex was used to grow a fully developed wheat crop during 1996. The growth rate and development of these plants compared well with earth grown plants indicating that the root zone water and oxygen stresses that have limited plant development in previous long-duration experiments have been overcome. However, management of the root environment during this experiment involved several significant changes in control settings as the relationship between the water delivery system, water status sensors, and the substrate changed during the growth cycles.