EUROCAT－X系统故障的诊断和分析

NESACC项目是我国空管史上规模最大的空管建设项目。该项目总投资近20亿人民币,分别在北京、上海、广州兴建三大区域管制中心,使用Thales公司研制的欧洲猫(EUROCAT-X)空管自动化系统,配备先进的自动化设备,使空管工作更为科学、直观、安全。EUROCAT-X系统自运行以来,运行情况基     

如何做好雷达管制下航空器的飞行动态监控

一、前言在雷达管制空域,只要管制员发出“radar contact”或“radaridentified”这样的指令,就担负起了对该航空器的一切动态过程的监控责任。如果对该机的飞行动态监控不到位,造成的一切不安全后果,雷达管制员都将难辞其咎。近来在全国范围内发生的几起不安全事件,多是由于管     

加速器切线照相技术研究

根据工作实践研究了固体发动机切线照相无损检测中黑度分布、散射线防治、象质计使用、检测概率计算、脱粘临界值确定等技术问题.     

关于平面空穴流动的截断误差减小方法(英文)

提出了一种新的截断误差减小方法。该方法是利用在粗网格 ( 2 h)上估算截断误差进而减小在原始网格( h)上的误差的迭代过程 ,最终目的是利用粗网格得出更精确的结果以及发展一种新的粗网格直接数值模拟方法     

均布压力作用各向异性矩形薄板大挠度问题

基于冯·卡门模型，选择中心挠度为摄动参数，利用摄动方法将正交异性矩形薄板大挠问题的非线性偏微分方程组逐级线性化，导出了各级摄动对应的几个线性偏微分方程组，然后再借助变分法求解，得到了均布载荷作用下正交异性矩形薄板的载荷-挠度曲线。     

一个飞机结构优化设计软件

本文根据有限元分析基础,研究薄壁结构在应力、位移、最小尺寸约束下结构最轻重量的优化设计问题。用Kuhn-Tucker(库恩-塔克)必要条件将多个位移约束简化为单一位移约束(称为最临界位移约束),建立位移约束下的优化设计准则.从而避免大批拉格朗日乘子的计算,并结合满应力优化设计准则,形成了在有效约束界面逐步逼近最优设计点的方法——包络法。用某型飞机后机身一段优化设计作为本文的实际应用,得到令人满意的结果。     

疲劳裂纹扩展速率试验数据的可靠性分析模型

以指定ΔＫ下的ｄａ／ｄＮ服从对数正态分布为基础，提出３种ｄａ／ｄＮ试验数据统计处理方法；依据一组４０ＣｒＮｉＭｏ材料的ＣＴ试样的试验数据处理结果，对３方法进行了分析对比。     

Time-Optimal Control of a Bounded Phase-Coordinate Process II: High-Order Systems with Multiple Control Inputs

This paper considers the problem arising from the design of an autopilot for a large booster. The motion-controlling actuators of the booster have both position and rate limits. The problem is formulated as a bounded phase-coordinate problem and analyzed by the ``backing out of the target' procedure. A method of constructing the optimal control is presented. An example of an oscillatory system with two control inputs is given, and the optimal control is expressed as an explicit time function.     

Comments on the Communication and Data Problems Associated with a Mars Trip During a Conjunction Phase

The analysis and comments presented in this paper are meant to establish the general communication parameters associated with Martian flyby probes and with lander and manned vehicles. Fundamental data transfer problems are reviewed to define comparisons and trends of tradeoffs for future studies. Selected focal points are based upon the long propagation path length, with inherent time delays, and the high noise produced by the sun. These problems are magnified because large quantities of data must be obtained to satisfy the needs of the scientific community and the curiosity of an interested public. A comparison of two communication systems is provided: the microwave spectrum and the optical spectrum, as represented by the microwaves at 2.3 GHz and the laser at 6328 ?. A method of cost effectiveness or value received from space missions (a criterion of power input for data quantity received) is also presented.     

低轨卫星面阵凝视成像技术研究

文章介绍了面阵凝视成像的工作原理及特点，阐述了低轨卫星对地观测凝视成像面临的像移问题及其解决措施，对像移补偿装置与二维指向机构的结合做了初步探讨。