Ceramic ChemCam Calibration Targets on Mars Science Laboratory

The ChemCam instrument on the Mars Science Laboratory rover Curiosity will use laser-induced breakdown spectroscopy (LIBS) to analyze major and minor element chemistry from sub-millimeter spot sizes, at ranges of ～1.5–7?m. To interpret the emission spectra obtained, ten calibration standards will be carried on the rover deck. Graphite, Ti?metal, and four glasses of igneous composition provide primary, homogeneous calibration targets for the laser. Four granular ceramic targets have been added to provide compositions closer to soils and sedimentary materials like those expected at the Gale Crater field site on Mars. Components used in making these ceramics include basalt, evaporite, and phyllosilicate materials that approximate the chemical compositions of detrital and authigenic constituents of clastic and evaporite sediments, including the elevated sulfate contents present in many Mars sediments and soils. Powdered components were sintered at low temperature (800?°C) with a small amount (9?wt.%) of lithium tetraborate flux to produce ceramics that retain volatile sulfur yet are durable enough for the mission. The ceramic targets are more heterogeneous than the pure element and homogenous glass standards but they provide standards with compositions more similar to the sedimentary rocks that will be Curiosity’s prime targets at Gale Crater.     

Correction to: Determining the Relative Cratering Ages of Regions of Psyche’s Surface

Space Science Reviews - Analysis of Homestake, Gallex and GNO measurements reveals evidence of variability of presumed solar-neutrino-flux measurements. Analysis of Super-Kamiokande neutrino...     

Balloon altitude studies of southern hemisphere hard X-ray sources by the Imperial College-University of Tasmania-INPE collaboration

Hard X-ray balloon altitude measurements with a 1600 cm² phoswich array are described. Data from observations on Sco X-1, GX1+4, GX5−1, Nova Oph. 1977, SMC X-1, SS433, IC 4329A and MR 2251-178 are presented. The role of Comptonisation in X-ray production for Sco X-1 and GX1+4 is discussed.     

The 2.5 to 5 microns spectrum of comet Halley from the IKS instrument of Vega

Results of the 2.5–5 micron spectroscopic channel of the IKS instrument on Vega are reported and the data reduction process is described. H₂O and CO₂ molecules have been detected with production rates of 10³⁰ s⁻¹ and 1.5 10²⁸ s⁻¹ respectively. Emission features between 3.3 and 3.7 microns are tentatively attributed to CH - bearing compounds - CO is marginally detected with a mixing ratio CO/H₂O 0.2. OH emission and H₂O - ice absorption might also be present in the spectra.     

Spherical accretion of massive black holes: A model for galactic nuclei

The possibility of explaining the continuous emission of active galactic nuclei in the frame of a model of spherical accretion onto a massive black hole is discussed. Cool inhomogeneities (T 10⁴°K) within the accretion flow could be responsible for the broad line emission if half of the accreting matter is in the dense phase. A crucial test of this hypothesis is the expected correlation between the ratio of the luminosity in lines to the total luminosity and the hardness of the continuous spectrum.     

工件表面轮廓均方根斜率的光散射测量

描述并确定具有明显纹理粗糙表面均方根斜率的光散射技术(均方根斜率是联合表面轮廓高度和波长特性的混合参数)。称为散射光锥法(The scattered light-conemethod)的该技术是基于激光角散射检测阵列(DALLAS——Defector Array for Laser LishtAngular Scattering),它用于测量粗糙表面散射光角分布的仪器。均方根斜率是从DALLAS光散射图象的角宽得到的。一般可以发现角宽(即估计的均方根斜率)对光的入射角和散射角变化相当大时是不敏感的。这些结果与表面材料无关,并且对正弦和随机粗糙表面都是有效的。介绍了散射光锥法的测量原理、实验、数据分析和几点结论。     

SIGMA observations of hard X-ray and soft gamma-ray emission from X-ray binaries

After more than two years of operation, the imaging γ-ray SIGMA telescope has accumulated several days of observation toward well known X-ray binaries. Four bright sources falling in this category have been detected so far: The pulsar GX 1+4 near the center of our galaxy, the stellar wind accreting system 4U 1700-377, and the black hole candidates Cygnus X-1 and GX 339-4. Moreover, SIGMA have observed three transients sources, which turned out to be also hard X-ray sources : The burster KS 1731-260, Tra X-1, and the Musca Nova. The properties of these systems in the SIGMA domain will be reviewed and a spectral distinction between black holes and neutron stars will be sketched.     

褶皱结构成形时的形状偏差计算

解决了褶皱结构成形时相邻的平行四边形平面元素之间连接区棱的修圆半径值预测问题。把毛坯模拟成薄板，定义了平行四边形平面元素的边界条件，采用能量法导出挠度和力函数的非线性微分方程组，利用积分－差分法实现其数值解，并提供计算结果和分析应力－应变场。采用的计算方法可用于研究毛坯的刚度参数和工艺参数对褶皱结构的形状影响。     

用薄板等积变换方法制造起伏构造的工艺问题研究(英文)

研究了用于夹层壁板的新型轻质芯材的制造问题。该种芯材是一种可改变平面方向的褶皱构造。采用薄板等积变换通过局部弯曲而不拉伸材料的方法制造该种芯材已成为可能。其主要难点在于 ,必须实现沿复杂的展开图上所有的画线同时弯曲。现借助于成形过程中使原来的构形组件变形解决其造型问题。本文提出的工艺方法可用于不同材料的深度起伏构造制造 ,如金属薄板和纸等。     

多随机变量的桁架结构系统的可靠性分析及优化设计

针对桁架结构系统，采用随机有限元法（SFEM）计算结构系统的响应量，考虑内力重新分配，建立失效模式的安全余量方程，用验算点法计算失效模式安全余量的可靠性指标，用改进的分枝限界法，寻找主要失效模式，通过对主要失效模式方程线性化研究，计算失效模式安全余量之间的相关系数，寻找主要失效模式，通过对主要失效模式方程线性化研究，计算失效模式安全余量之间的相关系数，最后用PNET法计算出结构系统的失效概率，同时给出多随机变量的结构系统可靠度的敏度表达式，采用最佳矢量法，求解了大型桁架结构系统基于可靠性指标约束下的最小重量的优化设计问题，最后，给出了实际算例，计算结果表明；采用随机有限元法能更好地考虑结构系统的多个随机变量对系统可靠性产生的影响；所采用的可靠性分析方法和优化方法是有效的。