Austrian dose measurements onboard space station MIR and the International Space Station--overview and comparison.

The Atominstitute of the Austrian Universities has conducted various space research missions in the last 12 years in cooperation with the Institute for Biomedical Problems in Moscow. They dealt with the exact determination of the radiation hazards for cosmonauts and the development of precise measurement devices. Special emphasis will be laid on the last experiment on space station MIR the goal of which was the determination of the depth distribution of absorbed dose and dose equivalent in a water filled Phantom. The first results from dose measurements onboard the International Space Station (ISS) will also be discussed. The spherical Phantom with a diameter of 35 cm was developed at the Institute for Biomedical Problems and had 4 channels where dosimeters can be exposed in different depths. The exposure period covered the timeframe from May 1997 to February 1999. Thermoluminescent dosimeters (TLDs) were exposed inside the Phantom, either parallel or perpendicular to the hull of the spacecraft. For the evaluation of the linear energy transfer (LET), the high temperature ratio (HTR) method was applied. Based on this method a mean quality factor and, subsequently, the dose equivalent is calculated according to the Q(LET infinity) relationship proposed in ICRP 26. An increased contribution of neutrons could be detected inside the Phantom. However the total dose equivalent did not increase over the depth of the Phantom. As the first Austrian measurements on the ISS dosimeter packages were exposed for 248 days, starting in February 2001 at six different locations onboard the ISS. The Austrian dosimeter sets for this first exposure on the ISS contained five different kinds of passive thermoluminescent dosimeters. First results showed a position dependent absorbed dose rate at the ISS.     

Simulation experiments of the effect of space environment on bacteriophage and DNA thin films.

The main goal of PUR experiment (phage and uracil response) is to examine and quantify the effect of specific space conditions on nucleic acid models. To achieve this an improved method was elaborated for the preparation of DNA and bacteriophage thin films. The homogeneity of the films was controlled by UV spectroscopy and microscopy. To provide experimental evidence for the hypothesis that interplanetary transfer of the genetic material is possible, phage T7 and isolated T7 DNA thin films have been exposed to selected space conditions: intense UVC radiation (lambda=254 nm) and high vacuum (10(-4) Pa). The effects of DNA hydration, conformation and packing on UV radiation damage were examined. Characteristic changes in the absorption spectrum, in the electrophoretic pattern of DNA and the decrease of the amount of PCR products have been detected indicating the photodamage of isolated and intraphage DNA.     

Influence of long-term altered gravity on the swimming performance of developing cichlid fish: including results from the 2nd German Spacelab Mission D-2.

This study presents qualitative and quantitative data concerning gravity-dependent changes in the swimming behaviour of developing cichlid fish larvae (Oreochromis mossambicus) after a 9 resp. 10 days exposure to increased acceleration (centrifuge experiments), to reduced gravity (fast-rotating clinostat), changed accelerations (parabolic aircraft flights) and to near weightlessness (2nd German Spacelab Mission D-2). Changes of gravity initially cause disturbances of the swimming performance of the fish larvae. With prolonged stay in orbit a step by step normalisation of the swimming behaviour took place in the fish. After return to 1g earth conditions no somersaulting or looping could be detected concerning the fish, but still slow and disorientated movements as compared to controls occurred. The fish larvae adapted to earth gravity within 3-5 days. Fish seem to be in a distinct early developmental stages extreme sensitive and adaptable to altered gravity; However, elder fish either do not react or show compensatory behaviour e.g. escape reactions.     

Enzyme conversion of lignocellulosic plant materials for resource recovery in a Controlled Ecological Life Support System.

A large amount of inedible plant material composed primarily of the carbohydrate materials cellulose, hemicellulose, and lignin is generated as a result of plant growth in a Controlled Ecological Life-Support System (CELSS). Cellulose is a linear homopolymer of glucose, which when properly processed will yield glucose, a valuable sugar because it can be added directly to human diets. Hemicellulose is a heteropolymer of hexoses and pentoses that can be treated to give a sugar mixture that is potentially a valuable fermentable carbon source. Such fermentations yield desirable supplements to the edible products from hydroponically-grown plants such as rapeseed, soybean, cowpea, or rice. Lignin is a three-dimensionally branched aromatic polymer, composed of phenyl propane units, which is susceptible to bioconversion through the growth of the white rot fungus, Pluerotus ostreatus. Processing conditions, that include both a hot water pretreatment and fungal growth and that lead to the facile conversion of plant polysaccharides to glucose, are presented.     

AFIT neural network research

A brief summary of research done at the Air Force Institute of Technology (AFIT) in the area of neural networks is provided. It has been shown that backpropagation, used for feedforward artificial neural networks, is just a degenerate version of an extended Kalman filter, and that networks can do about as well as the optimum statistical classification technique. A method of finding the importance of features for use by a neural network classifier has been determined. Techniques for using neural networks for image segmentation have been developed. In optical pattern recognition, techniques that allow the processing of real FLIR (forward-looking infrared) images with existing binary spatial light modulators have been devised. An optical direction of arrival detector applicable to laser illumination direction determination has been designed and tested; the design is similar to a fly's eye. Coated mirrors for the optical confocal Fabry-Perot interferometer have been designed, specified, fabricated, and installed. Significant progress has been made in the use of neural networks for processing multiple-feature sets for speech recognition     

A wavelet multiresolution analysis for spatio-temporal signals

The wavelet filters of the conventional 3D multiresolution analysis possess homogeneous spatial and temporal frequency characteristics which limits one's ability to match filter frequency characteristics to signal frequency behavior. Also, the conventional 3D multiresolution analysis employs an oct-tree decomposition structure which restricts the analysis of signal details to identical resolutions in space and time. This paper presents a 3D wavelet multiresolution analysis constructed from nonhomogeneous spatial and temporal filters, and an orthogonal sub-band coding scheme that decouples the spatial and temporal decomposition processes     

Simulation of fast ablation

A brief review of studies on simulation and control of a porous cooling process taking into account material transpiration is given. An approximated solution for an equation of the one-dimensional problem of fast ablation is also presented.     

How much of the solar irradiance variations is caused by the magnetic field at the solar surface?

The contribution to total solar irradiance variations by the magnetic field at the solar surface is estimated. Detailed models of the irradiance changes on the basis of magnetograms show that magnetic features at the solar surface account for over 90% of the irradiance variations on a solar rotation time scale and at least 70% on a solar cycle time scale. If the correction to the VIRGO record proposed by Fröhlich & Finsterle (2001) is accepted, then magnetic features at the solar surface are responsible for over 90% of the solar cycle irradiance variations as well.     

Fiber optic fence sensor developments

Many detection technologies have been employed for perimeter detection, to sensitize a barrier. These outdoor perimeter fence detection sensors must reliably detect intruders attempting to cut or climb the barrier, while ignoring the effects of environmental noise, including nearby activity. In recent conference proceedings, the new IntelliFIBER/spl trade/ fiber optic based product was introduced and compared with previous technologies. IntelliFIBER is designed to provide the advantages of a nonconductive "dielectric" cable sensor, e.g., resistance to electromagnetic interference and the ability to provide longer cable zones. It utilizes the proven processor of the Intelli-FLEX/spl trade/ triboelectric cable fence sensor, which provides relay or bidirectional networked serial communications and is compatible with its calibration module. IntelliFIBER also capitalizes on the Intelli-FLEX's adaptive detection algorithms that were developed through extensive field-testing, to provide exceptional immunity to environmental alarms while still detecting the skilled intruder.     

The finite element analysis of shells of revolution with a branching meridian

We present an algorithm for calculating the shells of revolution with the branching meridian using the triangular finite elements, the rigidity matrices of which are formed based on the vector method of displacement interpolation [1]. The correct kinematic and static conditions of shell conjugation on the line of their coupling have been developed. The shell structure consisting of a cylinder and adjacent shells is calculated under various conditions of support.