The Origin of Mercury’s Internal Magnetic Field

Mariner 10 measurements proved the existence of a large-scale internal magnetic field on Mercury. The observed field amplitude, however, is too weak to be compatible with typical convective planetary dynamos. The Lorentz force based on an extrapolation of Mariner 10 data to the dynamo region is 10⁻⁴ times smaller than the Coriolis force. This is at odds with the idea that planetary dynamos are thought to work in the so-called magnetostrophic regime, where Coriolis force and Lorentz force should be of comparable magnitude. Recent convective dynamo simulations reviewed here seem to resolve this caveat. We show that the available convective power indeed suffices to drive a magnetostrophic dynamo even when the heat flow though Mercury’s core–mantle boundary is subadiabatic, as suggested by thermal evolution models. Two possible causes are analyzed that could explain why the observations do not reflect a stronger internal field. First, toroidal magnetic fields can be strong but are confined to the conductive core, and second, the observations do not resolve potentially strong small-scale contributions. We review different dynamo simulations that promote either or both effects by (1) strongly driving convection, (2) assuming a particularly small inner core, or (3) assuming a very large inner core. These models still fall somewhat short of explaining the low amplitude of Mariner 10 observations, but the incorporation of an additional effect helps to reach this goal: The subadiabatic heat flow through Mercury’s core–mantle boundary may cause the outer part of the core to be stably stratified, which would largely exclude convective motions in this region. The magnetic field, which is small scale, strong, and very time dependent in the lower convective part of the core, must diffuse through the stagnant layer. Here, the electromagnetic skin effect filters out the more rapidly varying high-order contributions and mainly leaves behind the weaker and slower varying dipole and quadrupole components (Christensen in Nature 444:1056–1058, 2006). Messenger and BepiColombo data will allow us to discriminate between the various models in terms of the magnetic fields spatial structure, its degree of axisymmetry, and its secular variation.     

Missions to Mercury

Mercury is a very difficult planet to observe from the Earth, and space missions that target Mercury are essential for a comprehensive understanding of the planet. At the same time, it is also difficult to orbit because it is deep inside the Sun’s gravitational well. Only one mission has visited Mercury; that was Mariner 10 in the 1970s. This paper provides a brief history of Mariner 10 and the numerous imaginative but unsuccessful mission proposals since the 1970s for another Mercury mission. In the late 1990s, two missions—MESSENGER and BepiColombo—received the go-ahead; MESSENGER is on its way to its first encounter with Mercury in January 2008. The history, scientific objectives, mission designs, and payloads of both these missions are described in detail.     

山特维克可乐满CoroPak08.2新品亮相CIMES 2008

山特维克可乐满是山特维克集团旗下最大的金属切削刀具公司,是全球金属切削行业的领导品牌。作为全球排名第一的金属切削业刀具制造和供应商,山特维克可乐满始终致力于提升制造业的综合实力,并为客户不断提供创新的高效率金属切削刀具和解决方案。金秋9月新鲜     

HBM测量系统在航空航天中的应用

RUAG公司用HBM测量系统进行飞机全尺寸疲劳试验瑞士RUAG公司的研究人员对瑞士版F/A-18战斗机的加强结构进行了大规模的综合试验研究,以验证飞机结构是否能满足较高的要求,达到所需的5000个飞行小时的工作寿命。     

昆虫翅悬停飞行中的三维空间旋涡结构

昆虫(果蝇)悬停飞行中,翅膀按照特定的拍动方式往复运动,产生非定常高升力维持身体的平衡.研究昆虫高升力机理,需要探索拍动翼运动引发的三维空间非定常流场的特性,尤其是三维空间非定常涡的发展变化过程.本文将氢气泡流动显示技术应用于动态模型实验,定性的观察拍动翼前缘涡(LEV)的发展破裂过程.并利用数字体视粒子图像测速,DSPIV(Digital Steroscopic Particle Image Velocimetry)技术,测得了拍动翼运动瞬时相位和相位平均的三维空间流场信息(速度向量场、截面涡量场、空间涡量场,以及三维空间流线),揭示了拍动翼展向流动的存在,并结合定性和定量方法多角度说明了前缘涡沿展向发展到破裂的流动结构,并说明了侧缘涡与前缘涡的相互影响.测量结果表明:在雷诺数960的情况下,拍动翼运动至相位时,翼面上前缘涡在距翼根约60%展长的位置发生破裂;翼根至破裂点之间,展向流动稳定,指向翼梢;破裂点以后,展向流改变方向,指向翼根.     

结构误差对旋转稳定弹丸气动特性影响的数值模拟

基于剪切应力传输(SST)k-ω湍流模型,对考虑结构误差情况下的弹箭模型进行数值模拟计算。首先采用CFD和工程经验公式相结合的方法,得到了不同马赫数、不同转速情况下无结构误差模型的多种气动特性参数。通过与实验数据对比,阻力、法向力、俯仰力矩、压心位置误差在10%以内,验证了该方法的可行性和准确性。然后,建立了考虑结构误差即质量分布不对称、弹体不同轴和无结构误差模型,并分别进行了气动特性模拟计算。结果表明,质量偏心对滚转阻尼力矩系数、马格努斯力矩系数影响很大;弹体不同轴对法向力系数导数、俯仰力矩系数导数、马格努斯力矩系数导数和压心位置都产生很大影响。结构误差使模型的多种气动特性参数产生很大变化,将影响其飞行弹道和稳定性。     

Boundary discontinuous Fourier analysis of thick beams with clamped and simply supported edges via CUF

This paper presents an analytical solution for static analysis of thick rectangular beams with different boundary conditions.Carrera's Unified Formulation (CUF) is used in order to consider shear deformation theories of arbitrary order.The novelty of the present work is that a boundary discontinuous Fourier approach is used to consider clamped boundary conditions in the analytical solution,unlike Navier-type solutions which are restricted to simply supported beams.Governing equations are obtained by employing the principle of virtual work.The numerical accuracy of results is ascertained by studying the convergence of the solution and comparing the results to those of a 3D finite element solution.Beams subjected to bending due to a uniform pressure load and subjected to torsion due to opposite linear forces are considered.Overall,accurate results close to those of 3D finite element solutions are obtained,which can be used to validate finite element results or other approximate methods.     

OSIRIS-REx: Sample Return from Asteroid (101955) Bennu

In May of 2011, NASA selected the Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) asteroid sample return mission as the third mission in the New Frontiers program. The other two New Frontiers missions are New Horizons, which explored Pluto during a flyby in July 2015 and is on its way for a flyby of Kuiper Belt object 2014 MU69 on January 1, 2019, and Juno, an orbiting mission that is studying the origin, evolution, and internal structure of Jupiter. The spacecraft departed for near-Earth asteroid (101955) Bennu aboard an United Launch Alliance Atlas V 411 evolved expendable launch vehicle at 7:05 p.m. EDT on September 8, 2016, on a seven-year journey to return samples from Bennu. The spacecraft is on an outbound-cruise trajectory that will result in a rendezvous with Bennu in November 2018. The science instruments on the spacecraft will survey Bennu to measure its physical, geological, and chemical properties, and the team will use these data to select a site on the surface to collect at least 60 g of asteroid regolith. The team will also analyze the remote-sensing data to perform a detailed study of the sample site for context, assess Bennu’s resource potential, refine estimates of its impact probability with Earth, and provide ground-truth data for the extensive astronomical data set collected on this asteroid. The spacecraft will leave Bennu in 2021 and return the sample to the Utah Test and Training Range (UTTR) on September 24, 2023.