景象匹配正确定位概率的实验研究

景象匹配的理论分析结果揭示了景象匹配正确定位概率与实时图的信噪比和独立像元数的关系。文中通过对真实影像数据的景象匹配的结果统计给出了正确定位概率与信噪比和独立像元数的关系，并将该结果与理论结果进行了比较，对其中差异进行了分析解释。文中的结论可以用于景象匹配系统性能的精确分析。     

有分布质量系绳的卫星系统的动力学

以一组偏微分方程建立起的数学模型和采用距离速率控制算法来描述系统的受控运动。创建的递推算法用于计算系统的定常运动和称驻形。根据求解小偏差运动方程和通过边界条件求解特征根以判定驻形的稳定性。给出了模拟结果。     

空间辐射散热器含液滴介质的辐射特性和辐射传热

本文从米氏电磁散射理论出发，计算了含液滴介质的辐射特性。考察了中向同性散射能量传递份额的再分配，导出了吸收、发射、各几同性散射介质的辐射传递系数。计算了空间辐射散热器液滴层瞬态辐射换热，经与文献［４，５］的比较表明，本文所导出的辐射传递系数计算方法正确，精度高。用计算机辅助实验，分析液滴发生器产生粒子的大小、粒径分布对瞬态辐射换热的影响，可减少空间辐射散热器设计过程中的实验次数。     

封头补强技术研究

研究了碳纤维／环氧复合材料φ１５０ｍｍ和φ４８０ｍｍ压力容器封头的局部补强方法和工艺，试验结果表明：φ４８０ｍｍ压力容器经在大金属件边缘补强后改变了水压爆破时金属件飞出的现象，纤维强度得以充分发挥而使筒身段纵环向同时破坏；φ１５０ｍｍ压力容器的应力平衡系数可由０．７５提高到０．８５以上，筒身段纵向纤维发挥强度由２０９０ＭＰａ提高到２３３６ＭＰａ，提高约１１．８％。由此可见，壳体铺层设计与封头补强巧妙地结合是壳体优化设计的重要方法，是充分发挥纵向纤维强度的有效措施。     

The cost benefits of the Spacelab system to scientific investigations and space applications

In the past, one of the major problems in performing scientific investigations in space has been the high cost of developing, integrating, and transporting scientific experiments into space. The limited resources of unmanned spacecraft, coupled with the requirements for completely automated operations, was another factor contributing to the high costs of scientific research in space. In previous space missions after developing, integrating and transporting costly experiments into space and obtaining successful data, the experiment facility and spacecraft have been lost forever, because they could not be returned to earth. The objective of this paper is to present how the utilization of the Spacelab System will result in cost benefits to the scientific community, and significantly reduce the cost of space operations from previous space programs.The following approach was used to quantify the cost benefits of using the Spacelab System to greatly reduce the operational costs of scientific research in space. An analysis was made of the series of activities required to combine individual scientific experiments into an integrated payload that is compatible with the Space Transportation System (STS). These activities, including Shuttle and Spacelab integration, communications and data processing, launch support requirements, and flight operations were analyzed to indicate how this new space system, when compared with previous space systems, will reduce the cost of space research. It will be shown that utilization of the Spacelab modular design, standard payload interfaces, optional Mission Dependent Equipment (MDE), and standard services, such as the Experiment Computer Operating System (ECOS), allow the user many more services than previous programs, at significantly lower costs. In addition, the missions will also be analyzed to relate their cost benefit contributions to space scientific research.The analytical tools that are being developed at MSFC in the form of computer programs that can rapidly analyze experiment to Spacelab interfaces will be discussed to show how these tools allow the Spacelab integrator to economically establish the payload compatibility of a Spacelab mission.The information used in this paper has been assimilated from the actual experience gained in integrating over 50 highly complex, scientific experiments that will fly on the Spacelab first and second missions. In addition, this paper described the work being done at the Marshall Space Flight Center (MSFC) to define the analytical integration tools and techniques required to economically and efficiently integrate a wide variety of Spacelab payloads and missions. The conclusions reached in this study are based on the actual experience gained at MSFC in its roles of Spacelab integration and mission managers for the first three Spacelab missions. The results of this paper will clearly show that the cost benefits of the Spacelab system will greatly reduce the costs and increase the opportunities for scientific investigation from space.     

用非线性有限元法分析金属基复合材料的叠层板壳

采用通用于复合材料叠层厚、薄板壳的Ｈｅｆｅｒｏｓｉｓ三维退化曲壳元，利用Ｈｉｌｌ屈服准则和层状模型法，对金属基复合材料叠层板壳进行了弹塑性分析。算例结果表明，所用方法是可靠的，精度良好。     

基于小波分解与分形内插相结合的地形数据压缩方法

地形匹配制导中需要使用大量的地形数据，因此有效的地形数据压缩技术是非常重要的。传统的地形数据压缩方法主要采用线性内插的方法，但这对于地形起伏较大的山区地形失真太大，不能满足高精度导航的要求。本文基于小波分解与分形内插相结合的方法，提出了一种新的地形数据压缩方法，它具有压缩比高，保真性好，解码快的特点，特别适合山区地形数据的压缩。     

统计技术在复合材料制造过程中的应用

统计技术是质量管理中进行质量分析、质量控制和质量改进的重要工具。文章阐述了统计技术在复合材料过程控制中的应用，探讨了其应用范围、作用、办法及相关说明等内容。